A review of catalytic partial oxidation of methane to synthesis gas with emphasis on reaction mechanisms over transition metal catalysts
TL;DR: In this article, an extensive table on contributions to catalytic partial oxidation of methane over transition metal catalysts in the literature is provided, and both theoretical and experimental evidence pointing to inherent differences in the reaction mechanism over transition metals.
Abstract: Catalytic partial oxidation of methane has been reviewed with an emphasis on the reaction mechanisms over transition metal catalysts. The thermodynamics and aspects related to heat and mass transport is also evaluated, and an extensive table on research contributions to methane partial oxidation over transition metal catalysts in the literature is provided. Presented are both theoretical and experimental evidence pointing to inherent differences in the reaction mechanism over transition metals. These differences are related to methane dissociation, binding site preferences, the stability of OH surface species, surface residence times of active species and contributions from lattice oxygen atoms and support species. Methane dissociation requires a reduced metal surface, but at elevated temperatures oxides of active species may be reduced by direct interaction with methane or from the reaction with H, H2, C or CO. The comparison of elementary reaction steps on Pt and Rh illustrates that a key factor to produce hydrogen as a primary product is a high activation energy barrier to the formation of OH. Another essential property for the formation of H2 and CO as primary products is a low surface coverage of intermediates, such that the probability of O–H, OH–H and CO–O interactions are reduced. The local concentrations of reactants and products change rapidly through the catalyst bed. This influences the reaction mechanisms, but the product composition is typically close to equilibrated at the bed exit temperature.
Citations
More filters
TL;DR: A detailed overview of the development of nickel-based bimetallic catalysts for energy and environmental applications is provided in this article, where a detailed account is provided on the utilization of these systems in the catalytic reactions related to energy production and environmental remediation.
Abstract: Bimetallic catalysts have attracted extensive attention for a wide range of applications in energy production and environmental remediation due to their tunable chemical/physical properties. These properties are mainly governed by a number of parameters such as compositions of the bimetallic systems, their preparation method, and their morphostructure. In this regard, numerous efforts have been made to develop “designer” bimetallic catalysts with specific nanostructures and surface properties as a result of recent advances in the area of materials chemistry. The present review highlights a detailed overview of the development of nickel-based bimetallic catalysts for energy and environmental applications. Starting from a materials science perspective in order to obtain controlled morphologies and surface properties, with a focus on the fundamental understanding of these bimetallic systems to make a correlation with their catalytic behaviors, a detailed account is provided on the utilization of these systems in the catalytic reactions related to energy production and environmental remediation. We include the entire library of nickel-based bimetallic catalysts for both chemical and electrochemical processes such as catalytic reforming, dehydrogenation, hydrogenation, electrocatalysis and many other reactions.
525 citations
TL;DR: In this article, the authors present a review of recent results and developments in heterogeneous catalytic methane conversion to synthesis gas, hydrogen cyanide, ethylene, methanol, formaldehyde, methyl chloride, methyl bromide and aromatics.
Abstract: Methane activation by heterogeneous catalysis will play a key role to secure the supply of energy, chemicals and fuels in the future. Methane is the main constituent of natural gas and biogas and it is also found in crystalline hydrates at the continental slopes of many oceans and in permafrost areas. In view of this vast reserves and resources, the use of methane as chemical feedstock has to be intensified. The present review presents recent results and developments in heterogeneous catalytic methane conversion to synthesis gas, hydrogen cyanide, ethylene, methanol, formaldehyde, methyl chloride, methyl bromide and aromatics. After presenting recent estimates of methane reserves and resources the physico-chemical challenges of methane activation are discussed. Subsequent to this recent results in methane conversion to synthesis gas by steam reforming, dry reforming, autothermal reforming and catalytic partial oxidation are presented. The high temperature methane conversion to hydrogen cyanide via the BMA-process and the Andrussow-process is considered as well. The second part of this review focuses on one-step conversion of methane into chemicals. This includes the oxidative coupling of methane to ethylene mediated by oxygen and sulfur, the direct oxidation of methane to formaldehyde and methanol, the halogenation and oxy-halogenation of methane to methyl chloride and methyl bromide and finally the non-oxidative methane aromatization to benzene and related aromates. Opportunities and limits of the various activation strategies are discussed. .
478 citations
TL;DR: Mhanol protection is identified as being indispensable for future research on homogeneous and heterogeneous catalysis by establishing the severe limitations related to the direct catalytic synthesis of methanol from methane.
Abstract: Despite the large number of disparate approaches for the direct selective partial oxidation of methane, none of them has translated into an industrial process. The oxidation of methane to methanol is a difficult, but intriguing and rewarding, task as it has the potential to eliminate the prevalent natural gas flaring by providing novel routes to its valorization. This Review considers the synthesis of methanol and methanol derivatives from methane by homogeneous and heterogeneous pathways. By establishing the severe limitations related to the direct catalytic synthesis of methanol from methane, we highlight the vastly superior performance of systems which produce methanol derivatives or incorporate specific measures, such as the use of multicomponent catalysts to stabilize methanol. We thereby identify methanol protection as being indispensable for future research on homogeneous and heterogeneous catalysis.
451 citations
TL;DR: In this paper, a brief overview of availability of hydrogen, its properties and possible sources and its production methods, and its relationship with renewable energy utilisation, environment and climate is presented.
345 citations
TL;DR: Trends in the activation of O2 on transition metal surfaces are discussed, and various O2 adsorption states are described in terms of both electronic structure and geometry.
Abstract: The activation of O2 on metal surfaces is a critical process for heterogeneous catalysis and materials oxidation. Fundamental studies of well-defined metal surfaces using a variety of techniques have given crucial insight into the mechanisms, energetics, and dynamics of O2 adsorption and dissociation. Here, trends in the activation of O2 on transition metal surfaces are discussed, and various O2 adsorption states are described in terms of both electronic structure and geometry. The mechanism and dynamics of O2 dissociation are also reviewed, including the importance of the spin transition. The reactivity of O2 and O toward reactant molecules is also briefly discussed in the context of catalysis. The reactivity of a surface toward O2 generally correlates with the adsorption strength of O, the tendency to oxidize, and the heat of formation of the oxide. Periodic trends can be rationalized in terms of attractive and repulsive interactions with the d-band, such that inert metals tend to feature a full d band ...
303 citations
References
More filters
[...]
TL;DR: Although technological practice should minimize environmental impact, this is not always economically feasible as mentioned in this paper, and during the past decade, there has been increasing global concern over the environmental impact of technology.
Abstract: Although technological practice should minimize environmental impact, this is not always economically feasible. During the past decade, for example, there has been increasing global concern over th...
1,216 citations
TL;DR: In this article, a critical review of the kinetics and selectivity of the Fischer-Tropsch synthesis (FTS) is given, focusing on reaction mechanisms and kinetics.
Abstract: A critical review of the kinetics and selectivity of the Fischer–Tropsch synthesis (FTS) is given. The focus is on reaction mechanisms and kinetics of the water–gas shift and Fischer–Tropsch (FT) reactions. New developments in the product selectivity as well as the overall kinetics are reviewed. It is concluded that the development of rate equations for the FTS should be based on realistic mechanistic schemes. Qualitatively, there is agreement that the product distribution is affected by the occurrence of secondary reactions (hydrogenation, isomerization, reinsertion, and hydrogenolysis). At high CO and H2O pressures, the most important secondary reaction is readsorption of olefins, resulting in initiation of chain growth processes. Secondary hydrogenation of α-olefins may occur and depends on the catalytic system and the process conditions. The rates of the secondary reactions increase exponentially with chain length. Much controversy exists about whether these chain-length dependencies stem from differe...
1,074 citations
TL;DR: Based on density functional theory calculations, kinetic measurements, microkinetic and Monte Carlo simulations, thermogravimetric analysis (TGA) experiments, extended X-ray absorption spectroscopy (EXAFS) measurements, and experimental results from the literature, this paper presented a detailed and comprehensive mechanistic picture of the steam reforming process on a Ni catalyst.
1,002 citations
TL;DR: Rhodium was considerably superior to platinum in producing more H2 and less H2O, which can be explained by the known chemistry and kinetics of reactants, intermediates, and products on these surfaces.
Abstract: The reaction between methane and oxygen over platinum and rhodium surfaces in metalcoated ceramic monoliths can be made to produce mostly hydrogen and carbon monoxide (greater than 90% selectivity for both) with almost complete conversion of methane and oxygen at reaction times as short as 10–3 seconds. This process has great promise for conversion of abundant natural gas into liquid products such as methanol and hydrocarbons, which can be easily transported from remote locations. Rhodium was considerably superior to platinum in producing more H2 and less H2O, which can be explained by the known chemistry and kinetics of reactants, intermediates, and products on these surfaces.
906 citations
TL;DR: In this article, the authors reviewed the early stages of epitaxial growth and showed how the growth kinetics can be employed to create well-defined island morphologies and island arrays in a self-organization process.
851 citations