A review of chitin and chitosan applications
TL;DR: Chitin is the most abundant natural amino polysaccharide and is estimated to be produced annually almost as much as cellulose, and recent progress in chitin chemistry is quite noteworthy as mentioned in this paper.
Abstract: Chitin is the most abundant natural amino polysaccharide and is estimated to be produced annually almost as much as cellulose. It has become of great interest not only as an underutilized resource, but also as a new functional material of high potential in various fields, and recent progress in chitin chemistry is quite noteworthy. The purpose of this review is to take a closer look at chitin and chitosan applications. Based on current research and existing products, some new and futuristic approaches in this fascinating area are thoroughly discussed.
Citations
More filters
TL;DR: It is evident from a literature survey of about 210 recent papers that low-cost sorbents have demonstrated outstanding removal capabilities for certain dyes, and chitosan might be a promising adsorbent for environmental and purification purposes.
3,906 citations
TL;DR: From a comprehensive literature review, it was found that some LCAs, in addition to having wide availability, have fast kinetics and appreciable adsorption capacities too.
3,163 citations
TL;DR: Department of Pharmaceutics, National Institute of Pharmaceutical Education and Research (NIPER), Sector 67, S. S. Nagar, Punjab-160 062, India, Institute of Biochemistry, Faculty of Medicine, Polytechnic University, Via Ranieri 67, IT-60100 Ancona, Italy, and Department of Medicinal Chemistry & Natural Products,The Hebrew University of Jerusalem, School of Pharmacy-Faculty of medicine, Jerusalem 91120, Israel.
Abstract: Department of Pharmaceutics, National Institute of Pharmaceutical Education and Research (NIPER), Sector 67, S. A. S. Nagar,Mohali, Punjab-160 062, India, Institute of Biochemistry, Faculty of Medicine, Polytechnic University, Via Ranieri 67, IT-60100 Ancona, Italy,Green Biotechnology Research Group, The Special Division for Human Life Technology, National Institute of Advanced Industrial Science andTechnology, 1-8-31 Midorigaoka, Ikeda, Osaka-563-8577, Japan, and Department of Medicinal Chemistry & Natural Products,The Hebrew University of Jerusalem, School of Pharmacy-Faculty of Medicine, Jerusalem 91120, IsraelReceived March 2, 2004
2,570 citations
TL;DR: The chemical structure and relevant biological properties of chitosan for regenerative medicine have been summarized as well as the methods for the preparation of controlled drug release devices and their applications.
2,312 citations
TL;DR: In this paper, a review discusses the various attempts reported on solving this problem from the point of view of the chemistry and the structure of these polymers highlighting the drawbacks and advantages of each method and proposes that based on considerations of structure-property relations, it is possible to obtain chitin fibers with improved strength by making use of their nanostructures and/or mesophase properties of chitins.
2,278 citations
References
More filters
Book•
01 Jan 1985
TL;DR: In this paper, the authors describe a chain transfer characterisation of polymers charge-transfer complexes, charge transfer complexes and charge transfer complexes of charge transfer and charge-Transfer complexes.
Abstract: Cellular Materials Cellulose Cellulose, Biosynthesis Cellulose, Graft Copolymers Cellulose, Microcrystalline Cellulose Derivatives Cellulose Esters, Inorganic Cellulose Esters, Organic Cellulose Ethers Cement Additives Chain-Reaction Polymerization Chain Transfer Characterization of Polymers Charge-Transfer Complexes Chelate- Forming Polymers Chemical Analysis Chemically Resistant Polymers Chitin Chloroprene Polymers Chlorotrifluorethylene Polymers Chromatography Classification of Polymerization Reactions Coating Methods Coatings Coatings, Electrodeposition Cold Forming.
7,256 citations
TL;DR: In this paper, a simple exponential relation Mt/M∞ = ktn is introduced to describe the general solute release behavior of controlled release polymeric devices, where Mt is the fractional release, t is the release time, k is a constant, and n is the diffusional exponent characteristic of the release mechanism.
3,256 citations
TL;DR: Monodisperse biodegradable nanospheres were developed from amphiphilic copolymers composed of two biocompatible blocks and exhibited dramatically increased blood circulation times and reduced liver accumulation in mice.
Abstract: Injectable nanoparticulate carriers have important potential applications such as site-specific drug delivery or medical imaging. Conventional carriers, however, cannot generally be used because they are eliminated by the reticulo-endothelial system within seconds or minutes after intravenous injection. To address these limitations, monodisperse biodegradable nanospheres were developed from amphiphilic copolymers composed of two biocompatible blocks. The nanospheres exhibited dramatically increased blood circulation times and reduced liver accumulation in mice. Furthermore, they entrapped up to 45 percent by weight of the drug in the dense core in a one-step procedure and could be freeze-dried and easily redispersed without additives in aqueous solutions.
2,827 citations
TL;DR: Kevin Shakesheff investigates new methods of engineering polymer surfaces and the application of these engineered materials in drug delivery and tissue engineering.
Abstract: s, and 360 patents, and edited 12 books. He has also received over 80 major awards including the Gairdner Foundation International Award, Lemelson-MIT prize, ACS’s Applied Polymer Science and Polymer Chemistry Awards, AICHE’s Professional Progress, Bioengineering, Walker and Stine Materials Science and Engineering Awards. In 1989, Dr. Langer was elected to the Institute of Medicine of the National Academy of Sciences, and in 1992 he was elected to both the National Academy of Engineering and the National Academy of Sciences. He is the only active member of all three National Academies. Kevin Shakesheff was born in Ashington, Northumberland, U.K., in 1969. He received his Bacheclor of Pharmacy degree from the University of Nottingham in 1991 and a Ph.D. from the same institution in 1995. In 1996 he became a NATO Postdoctoral Fellow at MIT, Department of Chemical Engineering. He is currently an EPSRC Advanced Fellow at the School of Pharmaceutical Sciences, The University of Nottingham. His research group investigates new methods of engineering polymer surfaces and the application of these engineered materials in drug delivery and tissue engineering. 3182 Chemical Reviews, 1999, Vol. 99, No. 11 Uhrich et al.
2,532 citations
TL;DR: In this paper, a new approach for the preparation of nanoparticles made solely of hydrophilic polymers is presented, based on an ionic gelation process, is extremely mild and involves the mixture of two aqueous phases at room temperature.
Abstract: Hydrophilic nanoparticulate carriers have important potential applications for the administration of therapeutic molecules. The recently developed hydrophobic-hydrophilic carriers require the use of organic solvents for their preparation and have a limited protein-loading capacity. To address these limitations a new approach for the preparation of nanoparticles made solely of hydrophilic polymers is presented. The preparation technique, based on an ionic gelation process, is extremely mild and involves the mixture of two aqueous phases at room temperature. One phase contains the polysaccharide chitosan (CS) and a diblock copolymer of ethylene oxide and propylene oxide (PEO-PPO) and, the other, contains the polyanion sodium tripolyphosphate (TPP). Size (200–1000 nm) and zeta potential (between +20 mV and +60 mV) of nanoparticles can be conveniently modulated by varying the ratio CS/PEO-PPO. Furthermore, using bovine serum albumin (BSA) as a model protein it was shown that these new nanoparticles have a great protein loading capacity (entrapment efficiency up to 80% of the protein) and provide a continuous release of the entrapped protein for up to 1 week. © 1997 John Wiley & Sons, Inc.
1,619 citations