A series of simple oligomer-like small molecules based on oligothiophenes for solution-processed solar cells with high efficiency.
11 Mar 2015-Journal of the American Chemical Society (J Am Chem Soc)-Vol. 137, Iss: 11, pp 3886-3893
TL;DR: The results demonstrate that a fine and balanced modification/design of chemical structure can make significant performance differences and that the performance of solution-processed small-molecule-based solar cells can be comparable to or even surpass that of their polymer counterparts.
Abstract: A series of acceptor-donor-acceptor simple oligomer-like small molecules based on oligothiophenes, namely, DRCN4T-DRCN9T, were designed and synthesized. Their optical, electrical, and thermal properties and photovoltaic performances were systematically investigated. Except for DRCN4T, excellent performances were obtained for DRCN5T-DRCN9T. The devices based on DRCN5T, DRCN7T, and DRCN9T with axisymmetric chemical structures exhibit much higher short-circuit current densities than those based on DRCN6T and DRCN8T with centrosymmetric chemical structures, which is attributed to their well-developed fibrillar network with a feature size less than 20 nm. The devices based on DRCN5T/PC71BM showed a notable certified power conversion efficiency (PCE) of 10.10% under AM 1.5G irradiation (100 mW cm(-2)) using a simple solution spin-coating fabrication process. This is the highest PCE for single-junction small-molecule-based organic photovoltaics (OPVs) reported to date. DRCN5T is a rather simpler molecule compared with all of the other high-performance molecules in OPVs to date, and this might highlight its advantage in the future possible commercialization of OPVs. These results demonstrate that a fine and balanced modification/design of chemical structure can make significant performance differences and that the performance of solution-processed small-molecule-based solar cells can be comparable to or even surpass that of their polymer counterparts.
Citations
More filters
TL;DR: The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials and highlights the capabilities of various experimental techniques for characterization, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field.
Abstract: Organic (opto)electronic materials have received considerable attention due to their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefractive devices, and many others. The technological promises include low cost of these materials and the possibility of their room-temperature deposition from solution on large-area and/or flexible substrates. The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials. The focus of the review is on photoinduced processes and on electronic properties important for optoelectronic applications relying on charge carrier photogeneration. Additionally, it highlights the capabilities of various experimental techniques for characterization of these materials, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field. The properties of materials based both on small molecules and on conjug...
995 citations
963 citations
TL;DR: In this paper, the authors summarize the recent progress of ternary solar cells and try to concise out the scientific issues in preparing high performance TSSs, which is the best candidate due to the cell with a high power conversion efficiency, easy fabrication and low cost.
Abstract: The power conversion efficiency (PCE) of organic solar cells has been constantly refreshed in the past ten years from 4% up to 11% due to the contribution from the chemists on novel materials and the physicists on device engineering. For practical applications, a single bulk heterojunction structure may be the best candidate due to the cell with a high PCE, easy fabrication and low cost. Recently, ternary solar cells have attracted much attention due to enhanced photon harvesting by using absorption spectral or energy level complementary materials as the second donor or acceptor based on a single bulk heterojunction structure. For better promoting the development of ternary solar cells, we summarize the recent progress of ternary solar cells and try our best to concise out the scientific issues in preparing high performance ternary solar cells.
562 citations
TL;DR: Three novel solution-processable small molecules, which contain π-bridges with gradient-decreased electron density and end acceptors substituted with various fluorine atoms, exhibit excellent inverted device performance and an average power conversion efficiency of 11.08% are reported.
Abstract: Solution-processable small molecules for organic solar cells have attracted intense attention for their advantages of definite molecular structures compared with their polymer counterparts. However, the device efficiencies based on small molecules are still lower than those of polymers, especially for inverted devices, the highest efficiency of which is <9%. Here we report three novel solution-processable small molecules, which contain π-bridges with gradient-decreased electron density and end acceptors substituted with various fluorine atoms (0F, 1F and 2F, respectively). Fluorination leads to an optimal active layer morphology, including an enhanced domain purity, the formation of hierarchical domain size and a directional vertical phase gradation. The optimal morphology balances charge separation and transfer, and facilitates charge collection. As a consequence, fluorinated molecules exhibit excellent inverted device performance, and an average power conversion efficiency of 11.08% is achieved for a two-fluorine atom substituted molecule.
530 citations
TL;DR: In this article, a solution-processed, tandem organic solar cell based on the small molecules DR3TSBDT and DPPEZnP-TBO was proposed.
Abstract: Careful selection of small-molecule materials provides solution-processed tandem organic solar cells with a boost in efficiency. An effective way to improve the power conversion efficiency of organic solar cells is to use a tandem architecture consisting of two subcells, so that a broader part of the solar spectrum can be used and the thermalization loss of photon energy can be minimized1. For a tandem cell to work well, it is important for the subcells to have complementary absorption characteristics and generate high and balanced (matched) currents. This requires a rather challenging effort to design and select suitable active materials for use in the subcells. Here, we report a high-performance solution-processed, tandem solar cell based on the small molecules DR3TSBDT and DPPEZnP-TBO, which offer efficient, complementary absorption when used as electron donor materials in the front and rear subcells, respectively. Optimized devices achieve a power conversion efficiency of 12.50% (verified 12.70%), which represents a new level of capability for solution-processed, organic solar cells.
508 citations
References
More filters
TL;DR: In this article, the authors showed that PFN can be incorporated into polymer light-emitting devices (PLEDs) to enhance electron injection from high-work-function metals such as aluminium (work function w of 4.3 eV) and gold (w ¼ 5.2 eV).
Abstract: typically based on n-type metal oxides, our device is solutionprocessed at room temperature, enabling easy processibility over a large area. Accordingly, the approach is fully amenable to highthroughput roll-to-roll manufacturing techniques, may be used to fabricate vacuum-deposition-free PSCs of large area, and find practical applications in future mass production. Moreover, our discovery overturns a well-accepted belief (the inferior performance of inverted PSCs) and clearly shows that the characteristics of high performance, improved stability and ease of use can be integrated into a single device, as long as the devices are optimized, both optically and electrically, by means of a meticulously designed device structure. We also anticipate that our findings will catalyse the development of new device structures and may move the efficiency of devices towards the goal of 10% for various material systems. Previously, we reported that PFN can be incorporated into polymer light-emitting devices (PLEDs) to enhance electron injection from high-work-function metals such as aluminium (work function w of 4.3 eV) 22,23 and has thus been used to realize high-efficiency, air-stable PLEDs 24 . Furthermore, we also found that efficient electron injection can be obtained even in the most noble metals with extremely high work functions, such as gold (w ¼ 5.2 eV), by lowering the effective work function (for example lowering w in gold by 1.0 eV), which has previously been ascribed to the formation of a strong interface dipole 25 .
3,651 citations
TL;DR: The uncovered aggregation and design rules yield three high-efficiency (>10%) donor polymers and will allow further synthetic advances and matching of both the polymer and fullerene materials, potentially leading to significantly improved performance and increased design flexibility.
Abstract: Although the field of polymer solar cell has seen much progress in device performance in the past few years, several limitations are holding back its further development For instance, current high-efficiency (>90%) cells are restricted to material combinations that are based on limited donor polymers and only one specific fullerene acceptor Here we report the achievement of high-performance (efficiencies up to 108%, fill factors up to 77%) thick-film polymer solar cells for multiple polymer:fullerene combinations via the formation of a near-ideal polymer:fullerene morphology that contains highly crystalline yet reasonably small polymer domains This morphology is controlled by the temperature-dependent aggregation behaviour of the donor polymers and is insensitive to the choice of fullerenes The uncovered aggregation and design rules yield three high-efficiency (>10%) donor polymers and will allow further synthetic advances and matching of both the polymer and fullerene materials, potentially leading to significantly improved performance and increased design flexibility
2,839 citations
TL;DR: The development of a high-performance low bandgap polymer that enables a solution processed tandem solar cell with certified 10.6% power conversion efficiency under standard reporting conditions, which is the first certified polymer solar cell efficiency over 10%.
Abstract: An effective way to improve polymer solar cell efficiency is to use a tandem structure, as a broader part of the spectrum of solar radiation is used and the thermalization loss of photon energy is minimized. In the past, the lack of high-performance low-bandgap polymers was the major limiting factor for achieving high-performance tandem solar cell. Here we report the development of a high-performance low bandgap polymer (bandgap 60% and spectral response that extends to 900 nm, with a power conversion efficiency of 7.9%. The polymer enables a solution processed tandem solar cell with certified 10.6% power conversion efficiency under standard reporting conditions (25 °C, 1,000 Wm(-2), IEC 60904-3 global), which is the first certified polymer solar cell efficiency over 10%.
2,708 citations
TL;DR: This Account discusses the basic requirements and scientific issues in the molecular design of high efficiency photovoltaic molecules, and summarizes recent progress in electronic energy level engineering and absorption spectral broadening of the donor and acceptor photvoltaic materials by my research group and others.
Abstract: Bulk heterojunction (BHJ) polymer solar cells (PSCs) sandwich a blend layer of conjugated polymer donor and fullerene derivative acceptor between a transparent ITO positive electrode and a low work function metal negative electrode. In comparison with traditional inorganic semiconductor solar cells, PSCs offer a simpler device structure, easier fabrication, lower cost, and lighter weight, and these structures can be fabricated into flexible devices. But currently the power conversion efficiency (PCE) of the PSCs is not sufficient for future commercialization. The polymer donors and fullerene derivative acceptors are the key photovoltaic materials that will need to be optimized for high-performance PSCs.In this Account, I discuss the basic requirements and scientific issues in the molecular design of high efficiency photovoltaic molecules. I also summarize recent progress in electronic energy level engineering and absorption spectral broadening of the donor and acceptor photovoltaic materials by my researc...
2,527 citations
TL;DR: Simultaneous enhancement of open-circuit voltage, short-circuits current density, and fill factor in highly efficient polymer solar cells by incorporating an alcohol/water-soluble conjugated polymer as cathode interlayer is domonstrated.
Abstract: Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in highly efficient polymer solar cells by incorporating an alcohol/water-soluble conjugated polymer as cathode interlayer is domonstrated. When combined with a low-bandgap polymer PTB7 as the electron donor material, the power efficiency of the devices is improved to a certified 8.370%. Due to the drastic improvement in efficiency and easy utilization, this method opens new opportunities for PSCs from various material systems to improve towards 10% efficiency.
2,019 citations