Achieving Selective and Efficient Electrocatalytic Activity for CO2 Reduction Using Immobilized Silver Nanoparticles.
20 Oct 2015-Journal of the American Chemical Society (American Chemical Society)-Vol. 137, Iss: 43, pp 13844-13850
TL;DR: DFT calculations enlightened that the specific interaction between Ag nanoparticle and the anchoring agents modified the catalyst surface to have a selectively higher affinity to the intermediate COOH over CO, which effectively lowers the overpotential.
Abstract: Selective electrochemical reduction of CO2 is one of the most sought-after processes because of the potential to convert a harmful greenhouse gas to a useful chemical. We have discovered that immobilized Ag nanoparticles supported on carbon exhibit enhanced Faradaic efficiency and a lower overpotential for selective reduction of CO2 to CO. These electrocatalysts were synthesized directly on the carbon support by a facile one-pot method using a cysteamine anchoring agent resulting in controlled monodispersed particle sizes. These synthesized Ag/C electrodes showed improved activities, specifically decrease of the overpotential by 300 mV at 1 mA/cm2, and 4-fold enhanced CO Faradaic efficiency at −0.75 V vs RHE with the optimal particle size of 5 nm compared to polycrystalline Ag foil. DFT calculations enlightened that the specific interaction between Ag nanoparticle and the anchoring agents modified the catalyst surface to have a selectively higher affinity to the intermediate COOH over CO, which effectivel...
Citations
More filters
TL;DR: In this paper, the atomically dispersed nickel on nitrogenated graphene was identified as an efficient and durable electrocatalyst for CO2 reduction based on operando X-ray absorption and photo-electron spectroscopy measurements, and the monovalent Ni(i) atomic center with a d9 electronic configuration is identified as the catalytically active site.
Abstract: Electrochemical reduction of CO2 to chemical fuel offers a promising strategy for managing the global carbon balance, but presents challenges for chemistry due to the lack of effective electrocatalyst. Here we report atomically dispersed nickel on nitrogenated graphene as an efficient and durable electrocatalyst for CO2 reduction. Based on operando X-ray absorption and photoelectron spectroscopy measurements, the monovalent Ni(i) atomic center with a d9 electronic configuration was identified as the catalytically active site. The single-Ni-atom catalyst exhibits high intrinsic CO2 reduction activity, reaching a specific current of 350 A gcatalyst−1 and turnover frequency of 14,800 h−1 at a mild overpotential of 0.61 V for CO conversion with 97% Faradaic efficiency. The catalyst maintained 98% of its initial activity after 100 h of continuous reaction at CO formation current densities as high as 22 mA cm−2. Electrocatalysts with improved activity and stability for the conversion of CO2 to CO are being sought. Using operando spectroscopies, the authors identify atomically dispersed Ni(i) as the active site in a nitrogenated-graphene-supported catalyst with high intrinsic activity and stability over 100 hours.
1,368 citations
TL;DR: Various cocatalysts, such as the biomimetic, metal-based,Metal-free, and multifunctional ones, and their selectivity for CO2 photoreduction are summarized and discussed, along with the recent advances in this area.
Abstract: Photoreduction of CO2 into sustainable and green solar fuels is generally believed to be an appealing solution to simultaneously overcome both environmental problems and energy crisis. The low selectivity of challenging multi-electron CO2 photoreduction reactions makes it one of the holy grails in heterogeneous photocatalysis. This Review highlights the important roles of cocatalysts in selective photocatalytic CO2 reduction into solar fuels using semiconductor catalysts. A special emphasis in this review is placed on the key role, design considerations and modification strategies of cocatalysts for CO2 photoreduction. Various cocatalysts, such as the biomimetic, metal-based, metal-free, and multifunctional ones, and their selectivity for CO2 photoreduction are summarized and discussed, along with the recent advances in this area. This Review provides useful information for the design of highly selective cocatalysts for photo(electro)reduction and electroreduction of CO2 and complements the existing reviews on various semiconductor photocatalysts.
1,365 citations
TL;DR: Recent progress on the design and synthesis of solid-state catalysts for the electrochemical reduction of CO2 is described, followed by the general parameters for CO2 electroreduction and a summary of the reaction apparatus.
Abstract: The gradually increased concentration of carbon dioxide (CO2 ) in the atmosphere has been recognized as the primary culprit for the rise of the global mean temperature. In recent years, development of routes for highly efficient conversion of CO2 has received much attention. This Review describes recent progress on the design and synthesis of solid-state catalysts for the electrochemical reduction of CO2 . The significance of this catalytic conversion is presented, followed by the general parameters for CO2 electroreduction and a summary of the reaction apparatus. We also discuss various types of solid catalysts based on their CO2 conversion mechanisms. We summarize the crucial factors (particle size, surface structure, composition, etc.) determining the performance for electroreduction.
714 citations
TL;DR: In this review, recent research advances in electrocatalytic CO2 reduction are summarized from both experimental and theoretical aspects and are expected to provide new insights into the further technique development and practical applications of CO2 electroreduction.
Abstract: The worldwide unrestrained emission of carbon dioxide (CO2) has caused serious environmental pollution and climate change issues. For the sustainable development of human civilization, it is very desirable to convert CO2 to renewable fuels through clean and economical chemical processes. Recently, electrocatalytic CO2 conversion is regarded as a prospective pathway for the recycling of carbon resource and the generation of sustainable fuels. In this review, recent research advances in electrocatalytic CO2 reduction are summarized from both experimental and theoretical aspects. The referred electrocatalysts are divided into different classes, including metal–organic complexes, metals, metal alloys, inorganic metal compounds and carbon-based metal-free nanomaterials. Moreover, the selective formation processes of different reductive products, such as formic acid/formate (HCOOH/HCOO−), monoxide carbon (CO), formaldehyde (HCHO), methane (CH4), ethylene (C2H4), methanol (CH3OH), ethanol (CH3CH2OH), etc. are introduced in detail, respectively. Owing to the limited energy efficiency, unmanageable selectivity, low stability, and indeterminate mechanisms of electrocatalytic CO2 reduction, there are still many tough challenges need to be addressed. In view of this, the current research trends to overcome these obstacles in CO2 electroreduction field are summarized. We expect that this review will provide new insights into the further technique development and practical applications of CO2 electroreduction.
613 citations
TL;DR: A cobalt-phthalocyanine-based high-performance carbon dioxide reduction electrocatalyst material developed with a combined nanoscale and molecular approach that exhibits >95% Faradaic efficiency for carbon monoxide production in a wide potential range and extraordinary catalytic activity.
Abstract: Electrochemical reduction of carbon dioxide with renewable energy is a sustainable way of producing carbon-neutral fuels. However, developing active, selective and stable electrocatalysts is challenging and entails material structure design and tailoring across a range of length scales. Here we report a cobalt-phthalocyanine-based high-performance carbon dioxide reduction electrocatalyst material developed with a combined nanoscale and molecular approach. On the nanoscale, cobalt phthalocyanine (CoPc) molecules are uniformly anchored on carbon nanotubes to afford substantially increased current density, improved selectivity for carbon monoxide, and enhanced durability. On the molecular level, the catalytic performance is further enhanced by introducing cyano groups to the CoPc molecule. The resulting hybrid catalyst exhibits >95% Faradaic efficiency for carbon monoxide production in a wide potential range and extraordinary catalytic activity with a current density of 15.0 mA cm−2 and a turnover frequency of 4.1 s−1 at the overpotential of 0.52 V in a near-neutral aqueous solution. Electrochemical reduction of carbon dioxide is a sustainable way of producing carbon-neutral fuels. Here, the authors take a combined nanoscale and molecular approach to develop a highly active and selective cobalt phthalocyanine/carbon nanotube hybrid electrocatalyst for carbon dioxide reduction to carbon monoxide.
563 citations
References
More filters
TL;DR: A simple derivation of a simple GGA is presented, in which all parameters (other than those in LSD) are fundamental constants, and only general features of the detailed construction underlying the Perdew-Wang 1991 (PW91) GGA are invoked.
Abstract: Generalized gradient approximations (GGA’s) for the exchange-correlation energy improve upon the local spin density (LSD) description of atoms, molecules, and solids. We present a simple derivation of a simple GGA, in which all parameters (other than those in LSD) are fundamental constants. Only general features of the detailed construction underlying the Perdew-Wang 1991 (PW91) GGA are invoked. Improvements over PW91 include an accurate description of the linear response of the uniform electron gas, correct behavior under uniform scaling, and a smoother potential. [S0031-9007(96)01479-2] PACS numbers: 71.15.Mb, 71.45.Gm Kohn-Sham density functional theory [1,2] is widely used for self-consistent-field electronic structure calculations of the ground-state properties of atoms, molecules, and solids. In this theory, only the exchange-correlation energy EXC › EX 1 EC as a functional of the electron spin densities n"srd and n#srd must be approximated. The most popular functionals have a form appropriate for slowly varying densities: the local spin density (LSD) approximation Z d 3 rn e unif
146,533 citations
TL;DR: In this paper, a selfconsistent density functional method using standard norm-conserving pseudopotentials and a flexible, numerical linear combination of atomic orbitals basis set, which includes multiple-zeta and polarization orbitals, was developed and implemented.
Abstract: We have developed and implemented a selfconsistent density functional method using standard norm-conserving pseudopotentials and a flexible, numerical linear combination of atomic orbitals basis set, which includes multiple-zeta and polarization orbitals. Exchange and correlation are treated with the local spin density or generalized gradient approximations. The basis functions and the electron density are projected on a real-space grid, in order to calculate the Hartree and exchange-correlation potentials and matrix elements, with a number of operations that scales linearly with the size of the system. We use a modified energy functional, whose minimization produces orthogonal wavefunctions and the same energy and density as the Kohn-Sham energy functional, without the need for an explicit orthogonalization. Additionally, using localized Wannier-like electron wavefunctions allows the computation time and memory required to minimize the energy to also scale linearly with the size of the system. Forces and stresses are also calculated efficiently and accurately, thus allowing structural relaxation and molecular dynamics simulations.
8,723 citations
TL;DR: A method to perform fully self-consistent density-functional calculations that scales linearly with the system size and which is well suited for very large systems is presented, using strictly localized pseudoatomic orbitals as basis functions.
Abstract: We present a method to perform fully self-consistent density-functional calculations that scales linearly with the system size and which is well suited for very large systems. It uses strictly localized pseudoatomic orbitals as basis functions. The sparse Hamiltonian and overlap matrices are calculated with an $O(N)$ effort. The long-range self-consistent potential and its matrix elements are computed in a real-space grid. The other matrix elements are directly calculated and tabulated as a function of the interatomic distances. The computation of the total energy and atomic forces is also done in $O(N)$ operations using truncated, Wannier-like localized functions to describe the occupied states, and a band-energy functional which is iteratively minimized with no orthogonality constraints. We illustrate the method with several examples, including carbon and silicon supercells with up to 1000 Si atoms and supercells of $\ensuremath{\beta}$-${\mathrm{C}}_{3}$${\mathrm{N}}_{4}$. We apply the method to solve the existing controversy about the faceting of large icosahedral fullerenes by performing dynamical simulations on ${\mathrm{C}}_{60}$, ${\mathrm{C}}_{240}$, and ${\mathrm{C}}_{540}$.
2,236 citations
TL;DR: In this paper, the authors present a review of CO2, its synthetic reactions and their possible role in future CO2 mitigation schemes that have to match the scale of man-made CO2 in the atmosphere, which rapidly approaches 1 teraton.
Abstract: The increase in atmospheric carbon dioxide is linked to climate changes; hence there is an urgent need to reduce the accumulation of CO2 in the atmosphere. The utilization of CO2 as a raw material in the synthesis of chemicals and liquid energy carriers offers a way to mitigate the increasing CO2 buildup. This review covers six important CO2 transformations namely: chemical transformations, photochemical reductions, chemical and electrochemical reductions, biological conversions, reforming and inorganic transformations. Furthermore, the vast research area of carbon capture and storage is reviewed briefly. This review is intended as an introduction to CO2, its synthetic reactions and their possible role in future CO2 mitigation schemes that has to match the scale of man-made CO2 in the atmosphere, which rapidly approaches 1 teraton.
1,771 citations
TL;DR: The ability of renewable resources to provide all of society's energy needs is shown by using the United States as an example, and the issues of energy payback, carbon dioxide abatement, and energy storage are addressed.
Abstract: The ability of renewable resources to provide all of society's energy needs is shown by using the United States as an example. Various renewable systems are presented, and the issues of energy payback, carbon dioxide abatement, and energy storage are addressed. Pathways for renewable hydrogen generation are shown, and the implementation of hydrogen technologies into the energy infrastructure is presented. The question is asked, Should money and energy be spent on carbon dioxide sequestration, or should renewable resources be implemented instead.
1,454 citations