scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Activation of Peroxymonosulfate by Benzoquinone: A Novel Nonradical Oxidation Process

23 Oct 2015-Environmental Science & Technology (American Chemical Society)-Vol. 49, Iss: 21, pp 12941-12950
TL;DR: Findings have important implications for the development of novel nonradical oxidation processes based on PMS, because 1O2 as a moderately reactive electrophile may suffer less interference from background organic matters compared with nonselective •OH and SO4•-.
Abstract: The reactions between peroxymonosulfate (PMS) and quinones were investigated for the first time in this work, where benzoquinone (BQ) was selected as a model quinone. It was demonstrated that BQ could efficiently activate PMS for the degradation of sulfamethoxazole (SMX; a frequently detected antibiotic in the environments), and the degradation rate increased with solution pH from 7 to 10. Interestingly, quenching studies suggested that neither hydroxyl radical (•OH) nor sulfate radical (SO4•–) was produced therein. Instead, the generation of singlet oxygen (1O2) was proved by using two chemical probes (i.e., 2,2,6,6-tetramethyl-4-piperidinol and 9,10-diphenylanthracene) with the appearance of 1O2 indicative products detected by electron paramagnetic resonance spectrometry and liquid chromatography mass spectrometry, respectively. A catalytic mechanism was proposed involving the formation of a dioxirane intermediate between PMS and BQ and the subsequent decomposition of this intermediate into 1O2. Accordi...
Citations
More filters
Journal ArticleDOI
TL;DR: Sulfate radical-based advanced oxidation processes (AOPs) have received increasing attention in recent years due to their high capability and adaptability for the degradation of emerging contaminants as mentioned in this paper.

2,267 citations

Journal ArticleDOI
TL;DR: In this paper, the authors provide a state-of-the-art review on the development in heterogeneous catalysts including single metal, mixed metal, and nonmetal carbon catalysts for organic contaminants removal, with particular focus on peroxymonosulfate (PMS) activation.
Abstract: Sulfate radical-based advanced oxidation processes (SR-AOPs) employing heterogeneous catalysts to generate sulfate radical (SO4 −) from peroxymonosulfate (PMS) and persulfate (PS) have been extensively employed for organic contaminant removal in water. This article aims to provide a state–of–the–art review on the recent development in heterogeneous catalysts including single metal, mixed metal, and nonmetal carbon catalysts for organic contaminants removal, with particular focus on PMS activation. The hybrid heterogeneous catalyst/PMS systems integrated with other advanced oxidation technologies is also discussed. Several strategies for the identification of principal reactive radicals in SO4 −–oxidation systems are evaluated, namely (i) use of chemical probe or spin trapping agent coupled with analytical tools, and (ii) competitive kinetic approach using selective radical scavengers. The main challenges and mitigation strategies pertinent to the SR-AOPs are identified, which include (i) possible formation of oxyanions and disinfection byproducts, and (ii) dealing with sulfate produced and residual PMS. Potential future applications and research direction of SR-AOPs are proposed. These include (i) novel reactor design for heterogeneous catalytic system based on batch or continuous flow (e.g. completely mixed or plug flow) reactor configuration with catalyst recovery, and (ii) catalytic ceramic membrane incorporating SR-AOPs.

1,802 citations

Journal ArticleDOI
TL;DR: A literature review on environmental application of peroxymonosulfate (PMS) in degradation of contaminants to clarify the performance of PMS is carried out in this paper, which describes the PMS usage in remediation of environmental pollutants with focus on the different methods of activation and the effect of main operational parameters on PMS-based processes.

1,650 citations

Journal ArticleDOI
TL;DR: This Critical Review comparatively examines the activation mechanisms of peroxymonosulfate and peroxydisulfates and the formation pathways of oxidizing species and the impacts of water parameters and constituents such as pH, background organic matter, halide, phosphate, and carbonate on persulfate-driven chemistry.
Abstract: Reports that promote persulfate-based advanced oxidation process (AOP) as a viable alternative to hydrogen peroxide-based processes have been rapidly accumulating in recent water treatment literature. Various strategies to activate peroxide bonds in persulfate precursors have been proposed and the capacity to degrade a wide range of organic pollutants has been demonstrated. Compared to traditional AOPs in which hydroxyl radical serves as the main oxidant, persulfate-based AOPs have been claimed to involve different in situ generated oxidants such as sulfate radical and singlet oxygen as well as nonradical oxidation pathways. However, there exist controversial observations and interpretations around some of these claims, challenging robust scientific progress of this technology toward practical use. This Critical Review comparatively examines the activation mechanisms of peroxymonosulfate and peroxydisulfate and the formation pathways of oxidizing species. Properties of the main oxidizing species are scrutinized and the role of singlet oxygen is debated. In addition, the impacts of water parameters and constituents such as pH, background organic matter, halide, phosphate, and carbonate on persulfate-driven chemistry are discussed. The opportunity for niche applications is also presented, emphasizing the need for parallel efforts to remove currently prevalent knowledge roadblocks.

1,412 citations


Cites background from "Activation of Peroxymonosulfate by ..."

  • ...Unlike H2O2, 48 however, persulfate can also oxidize some organics directly, without involving radical species.(7-13) 49...

    [...]

Journal ArticleDOI
TL;DR: This Account showcases the recent contributions to metal-free catalysis in advanced oxidation, including design of nanocarbon catalysts, exploration of intrinsic active sites, and identification of reactive species and reaction pathways, and offers perspectives on carbocatalysis for future environmental applications.
Abstract: ConspectusCatalytic processes have remarkably boosted the rapid industrializations in chemical production, energy conversion, and environmental remediation. As one of the emerging applications of carbocatalysis, metal-free nanocarbons have demonstrated promise as catalysts for green remediation technologies to overcome the poor stability and undesirable metal leaching in metal-based advanced oxidation processes (AOPs). Since our reports of heterogeneous activation of persulfates with low-dimensional nanocarbons, the novel oxidative system has raised tremendous interest for degradation of organic contaminants in wastewater without secondary contamination. In this Account, we showcase our recent contributions to metal-free catalysis in advanced oxidation, including design of nanocarbon catalysts, exploration of intrinsic active sites, and identification of reactive species and reaction pathways, and we offer perspectives on carbocatalysis for future environmental applications.The journey starts with the dis...

872 citations

References
More filters
Journal ArticleDOI
TL;DR: In this article, the rate constants for over 3500 reaction are tabulated, including reaction with molecules, ions and other radicals derived from inorganic and organic solutes, and the corresponding radical anions, ⋅O− and eaq−, have been critically pulse radiolysis, flash photolysis and other methods.
Abstract: Kinetic data for the radicals H⋅ and ⋅OH in aqueous solution,and the corresponding radical anions, ⋅O− and eaq−, have been critically pulse radiolysis, flash photolysis and other methods. Rate constants for over 3500 reaction are tabulated, including reaction with molecules, ions and other radicals derived from inorganic and organic solutes.

9,887 citations

Journal ArticleDOI
TL;DR: In this article, rate constants have been compiled for reactions of various inorganic radicals produced by radiolysis or photolysis, as well as by other chemical means in aqueous solutions.
Abstract: Rate constants have been compiled for reactions of various inorganic radicals produced by radiolysis or photolysis, as well as by other chemical means in aqueous solutions. Data are included for the reactions of ⋅CO2 −, ⋅CO3⋅−, O3, ⋅N3, ⋅NH2, ⋅NO2, NO3⋅, ⋅PO32−, PO4⋅2−, SO2⋅ −, ⋅SO3 −, SO4⋅−, ⋅SO5⋅−, ⋅SeO3⋅ −, ⋅(SCN)2⋅ −, ⋅CL2⋅−, ⋅Br2⋅ −, ⋅I2⋅ −, ⋅ClO2⋅, ⋅BrO2⋅, and miscellaneous related radicals, with inorganic and organic compounds.

2,958 citations

Journal ArticleDOI
TL;DR: Nine transition metals were tested for the activation of three oxidants and the generation of inorganic radical species such as sulfate, peroxymonosulfate, and hydroxyl radicals to postulate the rate-determining step of the redox reactions taking place when a metal is coupled with an oxidant in aqueous solution.
Abstract: Nine transition metals were tested for the activation of three oxidants and the generation of inorganic radical species such as sulfate, peroxymonosulfate, and hydroxyl radicals. From the 27 combinations, 14 M/Ox couples demonstrated significant reactivity toward transforming a model organic substrate such as 2,4-dichlorophenol and are further discussed here. It was found that Co(II) and Ru(III) are the best metal catalysts for the activation of peroxymonosulfate. As expected on the basis of the Fenton reagent, Fe(III) and Fe(II) were the most efficient transition metals for the activation of hydrogen peroxide. Finally, Ag(I) showed the best results toward activating persulfate. Quenching studies with specific alcohols (tert-butyl alcohol and ethanol) were also performed to identify the primary radical species formed from the reactive M/Ox interactions. The determination of these transient species allowed us to postulate the rate-determining step of the redox reactions taking place when a metal is coupled with an oxidant in aqueous solution. It was found that when Co(II), Ru(III), and Fe(II) interact with peroxymonosulfate, freely diffusible sulfate radicals are the primary species formed. The same was proven for the interaction of Ag(I) with persulfate, but in this case caged or bound to the metal sulfate radicals might be formed as well. The conjunction of Ce(III), Mn(II), and Ni(II) with peroxymonosulfate showed also to generate caged or bound to the metal sulfate radicals. A combination of sulfate and hydroxyl radicals was formed from the conjunction of V(III) with peroxymonosulfate and from Fe(II) with persulfate. Finally, the conjunction of Fe(III), Fe(II), and Ru(III) with hydrogen peroxide led primarily to the generation of hydroxyl radicals. It is also suggested here that the redox behavior of a particular metal in solution cannot be predicted based exclusively on its size and charge. Additional phenomena such as metal hydrolysis as well as complexation with other counterions present in solution might affect the thermodynamics of the overall process and are further discussed here.

2,453 citations

Journal ArticleDOI
TL;DR: The advantage of Co/PMS compared to the traditional Fenton Reagent is attributed primarily to the oxidizing strength of the radicals formed, since sulfate radicals are stronger oxidants than hydroxyl and the thermodynamics of the transition-metal-oxidant coupling.
Abstract: A highly efficient advanced oxidation process for the destruction of organic contaminants in water is reported. The technology is based on the cobalt-mediated decomposition of peroxymonosulfate that leads to the formation of very strong oxidizing species (sulfate radicals) in the aqueous phase. The system is a modification of the Fenton Reagent, since an oxidant is coupled with a transition metal in a similar manner. Sulfate radicals were identified with quenching studies using specific alcohols. The study was primarily focused on comparing the cobalt/peroxymonosulfate (Co/PMS) reagent with the traditional Fenton Reagent [Fe(II)/H2O2] in the dark, at the pH range 2.0-9.0 with and without the presence of buffers such as phosphate and carbonate. Three model contaminants that show diversity in structure were tested: 2,4-dichlorophenol, atrazine, and naphthalene. Cobalt/peroxymonosulfate was consistently proven to be more efficient than the Fenton Reagent for the degradation of 2,4-dichlorophenol and atrazine, at all the conditions tested. At high pH values, where the efficiency of the Fenton Reagent was diminished, the reactivity of the Co/PMS system was sustained at high values. When naphthalene was treated with the two oxidizing systems in comparison, the Fenton Reagent demonstrated higher degradation efficiencies than cobalt/peroxymonosulfate at acidic pH, but, at higher pH (neutral), the latter was proven much more effective. The extent of mineralization, as total organic carbon removed,was also monitored, and again the Co/PMS reagent demonstrated higher efficiencies than the Fenton Reagent. Cobalt showed true catalytic activity in the overall process, since extremely low concentrations (in the range of microg/L) were sufficient for the decomposition of the oxidant and thus the radical generation. The advantage of Co/PMS compared to the traditional Fenton Reagent is attributed primarily to the oxidizing strength of the radicals formed, since sulfate radicals are stronger oxidants than hydroxyl and the thermodynamics of the transition-metal-oxidant coupling.

1,390 citations