scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Aligned Carbon Nanotube‐Silicon Sheets: A Novel Nano‐architecture for Flexible Lithium Ion Battery Electrodes

01 Sep 2013-Advanced Materials (John Wiley & Sons, Ltd)-Vol. 25, Iss: 36, pp 5109-5114
TL;DR: Aligned carbon nanotube sheets provide an engineered scaffold for the deposition of a silicon active material for lithium ion battery anodes, allowing uniform deposition of silicon thin films while the alignment allows unconstrained volumetric expansion of the silicon, facilitating stable cycling performance.
Abstract: Aligned carbon nanotube sheets provide an engineered scaffold for the deposition of a silicon active material for lithium ion battery anodes The sheets are low-density, allowing uniform deposition of silicon thin films while the alignment allows unconstrained volumetric expansion of the silicon, facilitating stable cycling performance The flat sheet morphology is desirable for battery construction
Citations
More filters
Journal ArticleDOI
TL;DR: In this paper, the authors summarized the recent research progress of flexible lithium-ion batteries, with special emphasis on electrode material selectivity and battery structural design, and discussed the prospects and challenges toward the practical uses of flexible batteries in electronic devices.
Abstract: With the advent of flexible electronics, flexible lithium-ion batteries have attracted great attention as a promising power source in the emerging field of flexible and wearable electronic devices such as roll-up displays, touch screens, conformable active radio-frequency identification tags, wearable sensors and implantable medical devices. In this review, we summarize the recent research progress of flexible lithium-ion batteries, with special emphasis on electrode material selectivity and battery structural design. We begin with a brief introduction of flexible lithium-ion batteries and the current development of flexible solid-state electrolytes for applications in this field. This is followed by a detailed overview of the recent progress on flexible electrode materials based on carbon nanotubes, graphene, carbon cloth, conductive paper (cellulose), textiles and some other low-dimensional nanostructured materials. Then recently proposed prototypes of flexible cable/wire type, transparent and stretchable lithium-ion batteries are highlighted. The latest advances in the exploration of other flexible battery systems such as lithium–sulfur, Zn–C (MnO2) and sodium-ion batteries, as well as related electrode materials are included. Finally, the prospects and challenges toward the practical uses of flexible lithium-ion batteries in electronic devices are discussed.

1,271 citations

Journal ArticleDOI
TL;DR: Recent progress and well-developed strategies in research designed to accomplish flexible and stretchable lithium-ion batteries and supercapacitors are reviewed.
Abstract: Energy-storage technologies such as lithium-ion batteries and supercapacitors have become fundamental building blocks in modern society. Recently, the emerging direction toward the ever-growing market of flexible and wearable electronics has nourished progress in building multifunctional energy-storage systems that can be bent, folded, crumpled, and stretched while maintaining their electrochemical functions under deformation. Here, recent progress and well-developed strategies in research designed to accomplish flexible and stretchable lithium-ion batteries and supercapacitors are reviewed. The challenges of developing novel materials and configurations with tailored features, and in designing simple and large-scaled manufacturing methods that can be widely utilized are considered. Furthermore, the perspectives and opportunities for this emerging field of materials science and engineering are also discussed.

892 citations

Journal ArticleDOI
TL;DR: In this article, an overview of the remarkable contributions made by the leading scientists in this important and promising research area is given, and some perspectives for the future and impacts of flexible energy storage and conversion systems are also proposed.
Abstract: To meet the rapid development of flexible, portable, and wearable electronic devices, extensive efforts have been devoted to develop matchable energy storage and conversion systems as power sources, such as flexible lithium-ion batteries (LIBs), supercapacitors (SCs), solar cells, fuel cells, etc. Particularly, during recent years, exciting works have been done to explore more suitable and effective electrode/electrolyte materials as well as more preferable cell configuration and structural designs to develop flexible power sources with better electrochemical performance for integration into flexible electronics. An overview is given for these remarkable contributions made by the leading scientists in this important and promising research area. Some perspectives for the future and impacts of flexible energy storage and conversion systems are also proposed.

736 citations

Journal ArticleDOI
TL;DR: In this article, the authors summarized various design strategies for producing random, aligned and core/shell structured carbon nanofibers, and elucidated the influences of polymer precursors, processing parameters, conductive additives and catalysts on functional, morphological and structural characteristics of CNFs.

548 citations

27 May 2010
TL;DR: In this article, the authors report the synthesis of 1D heterostructures comprising vertically aligned multiwall CNTs (VACNTs) containing nanoscale amorphous/nanocrystalline Si droplets deposited directly on VACNT with clearly defined spacing using a simple two-step liquid injection CVD process.
Abstract: Lithium-ion batteries have witnessed meteoric advancement the last two decades. The anode area has seen unprecedented research activity on Si and Sn, the two anode alternatives to currently used carbon following the initial seminal work by Fuji on tin oxide nanocomposites. Recent reports on silicon nanowires, porous Si, and amorphous Si coatings on graphite nanofibers (GNF) have been very encouraging. High capacity and long cycle life anodes are still, however, elusive and much needed to meet the ever increasing energy storage demands of modern society. Herein, we report for the first time the synthesis of novel 1D heterostructures comprising vertically aligned multiwall CNTs (VACNTs) containing nanoscale amorphous/nanocrystalline Si droplets deposited directly on VACNTs with clearly defined spacing using a simple two-step liquid injection CVD process. A hallmark of these single reactor derived heterostructures is an interfacial amorphous carbon layer anchoring the nanoscale Si clusters directly to the VACNTs. The defined spacing of nanoscale Si combined with their tethered CNT architecture allow for the silicon to undergo reversible electrochemical alloying and dealloying with Li with minimal loss of contact with the underlying CNTs. The novel heterostructures thus exhibit impressive reversible stable capacities approximately 2050 mAh/g with very good rate capability and an acceptable first cycle irreversible loss approximately 20% comparable to graphitic anodes indicating their promise as high capacity Li-ion anodes. Although warranting further research, particularly with regard to long-term cycling, it can be envisaged that optimization of this simple approach could lead to reversible high capacity next generation Li-ion anodes.

437 citations

References
More filters
Journal ArticleDOI
TL;DR: New strategies are needed for batteries that go beyond powering hand-held devices, such as using electrode hosts with two-electron redox centers; replacing the cathode hosts by materials that undergo displacement reactions; and developing a Li(+) solid electrolyte separator membrane that allows an organic and aqueous liquid electrolyte on the anode and cathode sides, respectively.
Abstract: Each cell of a battery stores electrical energy as chemical energy in two electrodes, a reductant (anode) and an oxidant (cathode), separated by an electrolyte that transfers the ionic component of the chemical reaction inside the cell and forces the electronic component outside the battery. The output on discharge is an external electronic current I at a voltage V for a time Δt. The chemical reaction of a rechargeable battery must be reversible on the application of a charging I and V. Critical parameters of a rechargeable battery are safety, density of energy that can be stored at a specific power input and retrieved at a specific power output, cycle and shelf life, storage efficiency, and cost of fabrication. Conventional ambient-temperature rechargeable batteries have solid electrodes and a liquid electrolyte. The positive electrode (cathode) consists of a host framework into which the mobile (working) cation is inserted reversibly over a finite solid–solution range. The solid–solution range, which is...

6,950 citations

Journal ArticleDOI
TL;DR: The theoretical charge capacity for silicon nanowire battery electrodes is achieved and maintained a discharge capacity close to 75% of this maximum, with little fading during cycling.
Abstract: There is great interest in developing rechargeable lithium batteries with higher energy capacity and longer cycle life for applications in portable electronic devices, electric vehicles and implantable medical devices. Silicon is an attractive anode material for lithium batteries because it has a low discharge potential and the highest known theoretical charge capacity (4,200 mAh g(-1); ref. 2). Although this is more than ten times higher than existing graphite anodes and much larger than various nitride and oxide materials, silicon anodes have limited applications because silicon's volume changes by 400% upon insertion and extraction of lithium which results in pulverization and capacity fading. Here, we show that silicon nanowire battery electrodes circumvent these issues as they can accommodate large strain without pulverization, provide good electronic contact and conduction, and display short lithium insertion distances. We achieved the theoretical charge capacity for silicon anodes and maintained a discharge capacity close to 75% of this maximum, with little fading during cycling.

6,104 citations

Journal ArticleDOI
TL;DR: Some of the recent scientific advances in nanomaterials, and especially in nanostructured materials, for rechargeable lithium-ion batteries are reviewed.
Abstract: Energy storage is more important today than at any time in human history. Future generations of rechargeable lithium batteries are required to power portable electronic devices (cellphones, laptop computers etc.), store electricity from renewable sources, and as a vital component in new hybrid electric vehicles. To achieve the increase in energy and power density essential to meet the future challenges of energy storage, new materials chemistry, and especially new nanomaterials chemistry, is essential. We must find ways of synthesizing new nanomaterials with new properties or combinations of properties, for use as electrodes and electrolytes in lithium batteries. Herein we review some of the recent scientific advances in nanomaterials, and especially in nanostructured materials, for rechargeable lithium-ion batteries.

5,441 citations

Journal ArticleDOI
TL;DR: It is shown that anodes consisting of an active silicon nanotube surrounded by an ion-permeable silicon oxide shell can cycle over 6,000 times in half cells while retaining more than 85% of their initial capacity.
Abstract: Although the performance of lithium ion-batteries continues to improve, their energy density and cycle life remain insufficient for applications in consumer electronics, transport and large-scale renewable energy storage. Silicon has a large charge storage capacity and this makes it an attractive anode material, but pulverization during cycling and an unstable solid-electrolyte interphase has limited the cycle life of silicon anodes to hundreds of cycles. Here, we show that anodes consisting of an active silicon nanotube surrounded by an ion-permeable silicon oxide shell can cycle over 6,000 times in half cells while retaining more than 85% of their initial capacity. The outer surface of the silicon nanotube is prevented from expansion by the oxide shell, and the expanding inner surface is not exposed to the electrolyte, resulting in a stable solid-electrolyte interphase. Batteries containing these double-walled silicon nanotube anodes exhibit charge capacities approximately eight times larger than conventional carbon anodes and charging rates of up to 20C (a rate of 1C corresponds to complete charge or discharge in one hour).

2,133 citations

Journal ArticleDOI
TL;DR: Nanostructured materials such as nano-carbons, alloys, metal oxides, and metal sulfides/nitrides have been used as anodes for rechargeable lithium-ion batteries.
Abstract: In this paper, the use of nanostructured anode materials for rechargeable lithium-ion batteries (LIBs) is reviewed. Nanostructured materials such as nano-carbons, alloys, metal oxides, and metal sulfides/nitrides have been used as anodes for next-generation LIBs with high reversible capacity, fast power capability, good safety, and long cycle life. This is due to their relatively short mass and charge pathways, high transport rates of both lithium ions and electrons, and other extremely charming surface activities. In this review paper, the effect of the nanostructure on the electrochemical performance of these anodes is presented. Their synthesis processes, electrochemical properties, and electrode reaction mechanisms are also discussed. The major goals of this review are to give a broad overview of recent scientific researches and developments of anode materials using novel nanoscience and nanotechnology and to highlight new progresses in using these nanostructured materials to develop high-performance LIBs. Suggestions and outlooks on future research directions in this field are also given.

2,042 citations