Journal ArticleDOI
Alignment of carbon nanotubes in a polymer matrix by mechanical stretching
Reads0
Chats0
TLDR
In this paper, a method to fabricate polymer-based composites with aligned carbon nanotubes is described, and a procedure to determine the nanotube orientation and the degree of alignment is presented.Abstract:
We report a method to fabricate polymer-based composites with aligned carbon nanotubes, and a procedure to determine the nanotube orientation and the degree of alignment. The composites were fabricated by casting a suspension of carbon nanotubes in a solution of a thermoplastic polymer and chloroform. They were uniaxially stretched at 100 °C and were found to remain elongated after removal of the load at room temperature. The orientation and the degree of alignment were determined by x-ray diffraction. The dispersion and the alignment of the nanotubes were also studied by transmission electron microscopy.read more
Citations
More filters
Journal ArticleDOI
Advances in the science and technology of carbon nanotubes and their composites: a review
TL;DR: A review of recent advances in carbon nanotubes and their composites can be found in this article, where the authors examine the research work reported in the literature on the structure and processing of carbon Nanotubes.
Journal ArticleDOI
Chemistry of Carbon Nanotubes
TL;DR: Department of Materials Science, University of Patras, Greece, Theoretical and Physical Chemistry Institute, National Hellenic Research Foundation, and Dipartimento di Scienze Farmaceutiche, Universita di Trieste, Piazzale Europa 1, 34127 Triesteadays.
Journal ArticleDOI
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
TL;DR: In this article, a review of the progress to date in the field of mechanical reinforcement of polymers using nanotubes is presented, and the most promising processing methods for mechanical reinforcement are discussed.
Journal ArticleDOI
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review
TL;DR: In this paper, a review of the current understanding of carbon nanotubes and CNT/polymer nanocomposites with two particular topics: (i) the principles and techniques for CNT dispersion and functionalization and (ii) the effects of CNT-based functionalization on the properties of polymers.
Journal ArticleDOI
Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties
TL;DR: In this paper, an extended account of the various chemical strategies for grafting polymers onto carbon nanotubes and the manufacturing of carbon-nanotube/polymer nanocomposites is given.
References
More filters
Journal ArticleDOI
Helical microtubules of graphitic carbon
TL;DR: Iijima et al. as mentioned in this paper reported the preparation of a new type of finite carbon structure consisting of needle-like tubes, which were produced using an arc-discharge evaporation method similar to that used for fullerene synthesis.
Journal ArticleDOI
Crystalline Ropes of Metallic Carbon Nanotubes
Andreas Thess,R. S. Lee,Pavel Nikolaev,Hongjie Dai,Pierre Petit,J. Robert,Chunhui Xu,Young Hee Lee,Seong-Gon Kim,Andrew G. Rinzler,Daniel T. Colbert,Gustavo E. Scuseria,David Tománek,John E. Fischer,Richard E. Smalley +14 more
TL;DR: X-ray diffraction and electron microscopy showed that fullerene single-wall nanotubes (SWNTs) are nearly uniform in diameter and that they self-organize into “ropes,” which consist of 100 to 500 SWNTs in a two-dimensional triangular lattice with a lattice constant of 17 angstroms.
Journal ArticleDOI
Nanobeam mechanics: Elasticity, strength, and toughness of nanorods and nanotubes
TL;DR: In this paper, the Young's modulus, strength, and toughness of nanostructures are evaluated using an atomic force microscopy (AFM) approach. And the results showed that the strength of the SiC NRs were substantially greater than those found previously for larger SiC structures, and they approach theoretical values.
Journal ArticleDOI
A Carbon Nanotube Field-Emission Electron Source
TL;DR: In this paper, a high-intensity electron gun based on field emission from a film of aligned carbon nanotubes has been made, which consists of a nanotube film with a 1-millimeter-diameter grid about 20 micrometers above it.
Journal ArticleDOI
Large-scale synthesis of carbon nanotubes
TL;DR: In this article, the authors used a variant of the standard arc-discharge technique for fullerene synthesis under a helium atmosphere, where a carbonaceous deposit formed on one of the graphite rods, consisting of a macroscopic (diameter of about 5 mm) cylinder.