scispace - formally typeset
Search or ask a question
Book•

Analysis and Performance of Fiber Composites

TL;DR: In this paper, the authors present an analysis of the properties of fiber-reinforced composites under different types of stress and failure modes, such as failure under longitudinal tensile loads, failure under transverse tensile load, and failure under In-Plane Shear Load.
Abstract: Preface. 1 Introduction. 1.1 Definition. 1.2 Characteristics. 1.3 Classification. 1.4 Particulate Composites. 1.5 Fiber-Reinforced Composites. 1.6 Applications of Fiber Composites. Exercise Problems. References. 2 Fibers, Matrices, and Fabrication of Composites. 2.1 Advanced Fibers. 2.1.1 Glass Fibers. 2.1.2 Carbon and Graphite Fibers. 2.1.3 Aramid Fibers. 2.1.4 Boron Fibers. 2.1.5 Other Fibers. 2.2 Matrix Materials. 2.2.1 Polymers. 2.2.2 Metals. 2.3 Fabrication of Composites. 2.3.1 Fabrication of Thermosetting Resin Matrix Composites. 2.3.2 Fabrication of Thermoplastic-Resin Matrix Composites (Short-Fiber Composites). 2.3.3 Fabrication of Metal Matrix Composites. 2.3.4 Fabrication of Ceramic Matrix Composites. Suggested Reading. 3 Behavior of Unidirectional Composites. 3.1 Introduction. 3.1.1 Nomenclature. 3.1.2 Volume and Weight Fractions. 3.2 Longitudinal Behavior of Unidirectional Composites. 3.2.1 Initial Stiffness. 3.2.2 Load Sharing. 3.2.3 Behavior beyond Initial Deformation. 3.2.4 Failure Mechanism and Strength. 3.2.5 Factors Influencing Longitudinal Strength and Stiffness. 3.3 Transverse Stiffness and Strength. 3.3.1 Constant-Stress Model. 3.3.2 Elasticity Methods of Stiffness Prediction. 3.3.3 Halpin-Tsai Equations for Transverse Modulus. 3.3.4 Transverse Strength. 3.4 Prediction of Shear Modulus. 3.5 Prediction of Poisson's Ratio. 3.6 Failure Modes. 3.6.1 Failure under Longitudinal Tensile Loads. 3.6.2 Failure under Longitudinal Compressive Loads. 3.6.3 Failure under Transverse Tensile Loads. 3.6.4 Failure under Transverse Compressive Loads. 3.6.5 Failure under In-Plane Shear Loads. 3.7 Expansion Coefficients and Transport Properties. 3.7.1 Thermal Expansion Coefficients. 3.7.2 Moisture Expansion Coefficients. 3.7.3 Transport Properties. 3.7.4 Mass Diffusion. 3.8 Typical Unidirectional Fiber Composite Properties. Exercise Problems. References. 4 Short-Fiber Composites. 4.1 Introduction. 4.2 Theories of Stress Transfer. 4.2.1 Approximate Analysis of Stress Transfer. 4.2.2 Stress Distributions from Finite-Element Analysis. 4.2.3 Average Fiber Stress. 4.3 Modulus and Strength of Short-Fiber Composites. 4.3.1 Prediction of Modulus. 4.3.2 Prediction of Strength. 4.3.3 Effect of Matrix Ductility. 4.4 Ribbon-Reinforced Composites. Exercise Problems. References. 5 Analysis of an Orthotropic Lamina. 5.1 Introduction. 5.1.1 Orthotropic Materials. 5.2 Stress-Strain Relations and Engineering Constants. 5.2.1 Stress-Strain Relations for Specially Orthotropic Lamina. 5.2.2 Stress-Strain Relations for Generally Orthotropic Lamina. 5.2.3 Transformation of Engineering Constants. 5.3 Hooke's Law and Stiffness and Compliance Matrices. 5.3.1 General Anisotropic Material. 5.3.2 Specially Orthotropic Material. 5.3.3 Transversely Isotropic Material. 5.3.4 Isotropic Material. 5.3.5 Specially Orthotropic Material under Plane Stress. 5.3.6 Compliance Tensor and Compliance Matrix. 5.3.7 Relations between Engineering Constants and Elements of Stiffness and Compliance Matrices. 5.3.8 Restrictions on Elastic Constants. 5.3.9 Transformation of Stiffness and Compliance Matrices. 5.3.10 Invariant Forms of Stiffness and Compliance Matrices. 5.4 Strengths of an Orthotropic Lamina. 5.4.1 Maximum-Stress Theory. 5.4.2 Maximum-Strain Theory. 5.4.3 Maximum-Work Theory. 5.4.4 Importance of Sign of Shear Stress on Strength of Composites. Exercise Problems. References. 6 Analysis of Laminated Composites. 6.1 Introduction. 6.2 Laminate Strains. 6.3 Variation of Stresses in a Laminate. 6.4 Resultant Forces and Moments: Synthesis of Stiffness Matrix. 6.5 Laminate Description System. 6.6 Construction and Properties of Special Laminates. 6.6.1 Symmetric Laminates. 6.6.2 Unidirectional, Cross-Ply, and Angle-Ply Laminates. 6.6.3 Quasi-isotropic Laminates. 6.7 Determination of Laminae Stresses and Strains. 6.8 Analysis of Laminates after Initial Failure. 6.9 Hygrothermal Stresses in Laminates. 6.9.1 Concepts of Thermal Stresses. 6.9.2 Hygrothermal Stress Calculations. 6.10 Laminate Analysis Through Computers. Exercise Problems. References. 7 Analysis of Laminated Plates and Beams. 7.1 Introduction. 7.2 Governing Equations for Plates. 7.2.1 Equilibrium Equations. 7.2.2 Equilibrium Equations in Terms of Displacements. 7.3 Application of Plate Theory. 7.3.1 Bending. 7.3.2 Buckling. 7.3.3 Free Vibrations. 7.4 Deformations Due to Transverse Shear. 7.4.1 First-Order Shear Deformation Theory. 7.4.2 Higher-Order Shear Deformation Theory. 7.5 Analysis of Laminated Beams. 7.5.1 Governing Equations for Laminated Beams. 7.5.2 Application of Beam Theory. Exercise Problems. References. 8 Advanced Topics in Fiber Composites. 8.1 Interlaminar Stresses and Free-Edge Effects. 8.1.1 Concepts of Interlaminar Stresses. 8.1.2 Determination of Interlaminar Stresses. 8.1.3 Effect of Stacking Sequence on Interlaminar Stresses. 8.1.4 Approximate Solutions for Interlaminar Stresses. 8.1.5 Summary. 8.2 Fracture Mechanics of Fiber Composites. 8.2.1 Introduction. 8.2.2 Fracture Mechanics Concepts and Measures of Fracture Toughness. 8.2.3 Fracture Toughness of Composite Laminates. 8.2.4 Whitney-Nuismer Failure Criteria for Notched Composites. 8.3 Joints for Composite Structures. 8.3.1 Adhesively Bonded Joints. 8.3.2 Mechanically Fastened Joints. 8.3.3 Bonded-Fastened Joints. Exercise Problems. References. 9 Performance of Fiber Composites: Fatigue, Impact, and Environmental Effects. 9.1 Fatigue. 9.1.1 Introduction. 9.1.2 Fatigue Damage. 9.1.3 Factors Influencing Fatigue Behavior of Composites. 9.1.4 Empirical Relations for Fatigue Damage and Fatigue Life. 9.1.5 Fatigue of High-Modulus Fiber-Reinforced Composites. 9.1.6 Fatigue of Short-Fiber Composites. 9.2 Impact. 9.2.1 Introduction and Fracture Process. 9.2.2 Energy-Absorbing Mechanisms and Failure Models. 9.2.3 Effect of Materials and Testing Variables on Impact Properties. 9.2.4 Hybrid Composites and Their Impact Strength. 9.2.5 Damage Due to Low-Velocity Impact. 9.3 Environmental-Interaction Effects. 9.3.1 Fiber Strength. 9.3.2 Matrix Effects. Exercise Problems. References. 10 Experimental Characterization of Composites. 10.1 Introduction. 10.2 Measurement of Physical Properties. 10.2.1 Density. 10.2.2 Constituent Weight and Volume Fractions. 10.2.3 Void Volume Fraction. 10.2.4 Thermal Expansion Coefficients. 10.2.5 Moisture Absorption and Diffusivity. 10.2.6 Moisture Expansion Coefficients. 10.3 Measurement of Mechanical Properties. 10.3.1 Properties in Tension. 10.3.2 Properties in Compression. 10.3.3 In-Place Shear Properties. 10.3.4 Flexural Properties. 10.3.5 Measures of In-Plane Fracture Toughness. 10.3.6 Interlaminar Shear Strength and Fracture Toughness. 10.3.7 Impact Properties. 10.4 Damage Identification Using Nondestructive Evaluation Techniques. 10.4.1 Ultrasonics. 10.4.2 Acoustic Emission. 10.4.3 x-Radiography. 10.4.4 Thermography. 10.4.5 Laser Shearography. 10.5 General Remarks on Characterization. Exercise Problems. References. 11 Emerging Composite Materials. 11.1 Nanocomposites. 11.2 Carbon-Carbon Composites. 11.3 Biocomposites. 11.3.1 Biofibers. 11.3.2 Wood-Plastic Composites (WPCs). 11.3.3 Biopolymers. 11.4 Composites in "Smart" Structures. Suggested Reading. Appendix 1: Matrices and Tensors. Appendix 2: Equations of Theory of Elasticity. Appendix 3: Laminate Orientation Code. Appendix 4: Properties of Fiber Composites. Appendix 5: Computer Programs for Laminate Analysis. Index.
Citations
More filters
Book Chapter•DOI•
01 Jan 2008
TL;DR: The combination of materials to form a new material system with enhanced material properties is a well documented historical fact as discussed by the authors, which is why many artisans from the Mediterranean and Far East used a form of composite technology in molding art works which were fabricated by layering cut paper in various sizes for producing desired shapes and contours.
Abstract: The combination of materials to form a new material system with enhanced material properties is a well documented historical fact. For example, the ancient Jewish workers during their tenure under the Pharaohs used chopped straws in bricks as a means of enhancing their structural integrity. The Japanese Samurai warriors were known to use laminated metals in the forging of their swords to obtain desirable material properties. Even certain artisans from the Mediterranean and Far East used a form of composite technology in molding art works which were fabricated by layering cut paper in various sizes for producing desired shapes and contours.

3,908 citations

Journal Article•DOI•
TL;DR: In this article, a review of polymer nanocomposites with single-wall or multi-wall carbon nanotubes is presented, and the current challenges to and opportunities for efficiently translating the extraordinary properties of carbon-nanotubes to polymer matrices are summarized.
Abstract: We review the present state of polymer nanocomposites research in which the fillers are single-wall or multiwall carbon nanotubes. By way of background we provide a brief synopsis about carbon nanotube materials and their suspensions. We summarize and critique various nanotube/polymer composite fabrication methods including solution mixing, melt mixing, and in situ polymerization with a particular emphasis on evaluating the dispersion state of the nanotubes. We discuss mechanical, electrical, rheological, thermal, and flammability properties separately and how these physical properties depend on the size, aspect ratio, loading, dispersion state, and alignment of nanotubes within polymer nanocomposites. Finally, we summarize the current challenges to and opportunities for efficiently translating the extraordinary properties of carbon nanotubes to polymer matrices in hopes of facilitating progress in this emerging area.

3,239 citations

Journal Article•DOI•
Roderic S. Lakes1•
11 Feb 1993-Nature
TL;DR: Understanding the effects of hierarchical structure can guide the synthesis of new materials with physical properties that are tailored for specific applications, as well as determining the bulk material properties.
Abstract: The role of structural hierarchy in determining bulk material properties is examined. Dense hierarchical materials are discussed, including composites and polycrystals, polymers, and biological materials. Hierarchical cellular materials are considered, including cellular solids and the prediction of strength and stiffness in hierarchical cellular materials.

1,202 citations

Journal Article•DOI•
TL;DR: In this article, the authors discuss various assembly techniques available for effectively incorporating the strong and flexible graphene-based components into polymer matrices by utilization of weak and strong interfacial interactions available in functionalized graphene sheets.

918 citations


Cites background from "Analysis and Performance of Fiber C..."

  • ...with nanoparticle fillers of various geometries, including rods, disks, and spheres [3,121]....

    [...]

Journal Article•DOI•
S. Chand1•
TL;DR: In this paper, the authors reviewed and analyzed the developments made during last few decades in the field of high performance carbon fibers and identified and suggested some specific areas for future research in order to minimize the gap between theoretical and practically realized tensile strengths and other mechanical properties of carbon fibers.
Abstract: An attempt has been made to review and analyze the developments made during last few decades in the field of high performance carbon fibers The focus is primarily on high technology sector, which includes aerospace and nuclear engineering or other areas, where the large scale use of carbon fibers is driven by maximum performance and not by cost factors We have identified and suggested some specific areas for future research in order to minimize the gap between theoretical and practically realized tensile strengths and other mechanical properties of carbon fibers

793 citations