Anomalously high porosity and permeability in deeply buried sandstone reservoirs: Origin and predictability

TLDR: In this paper, the authors focus on quantification and predictability of three major causes of anomalous high porosity: (1) grain coats and grain rims, (2) early emplacement of hydrocarbons, and (3) shallow development of fluid overpressure.

Abstract: Porosity and permeability generally decrease with increasing depth (thermal exposure and effective pressure); however, a significant number of deep (>4 km [approximately 13,000 ft]) sandstone reservoirs worldwide are characterized by anomalously high porosity and permeability. Anomalous porosity and permeability can be defined as being statistically higher than the porosity and permeability values occurring in typical sandstone reservoirs of a given lithology (composition and texture), age, and burial/temperature history. In sandstones containing anomalously high porosities, such porosities exceed the maximum porosity of the typical sandstone subpopulation. Major causes of anomalous porosity and permeability were identified decades ago; however, quantification of the effect of processes responsible for anomalous porosity and permeability and the assessment of the predictability of anomalous porosity and permeability occurrence in subsurface sandstones have rarely been addressed in published literature. The focus of this article is on quantification and predictability of three major causes of anomalously high porosity: (1) grain coats and grain rims, (2) early emplacement of hydrocarbons, and (3) shallow development of fluid overpressure. Grain coats and grain rims retard quartz cementation and concomitant porosity and permeability reduction by inhibiting precipitation of quartz overgrowths on detrital-quartz grains. Currently, prediction of anomalous porosity associated with grain coats and grain rims is dependent on the availability of empirical data sets. In the absence of adequate empirical data, sedimentologic and diagenetic models can be helpful in assessing risk due to reservoir quality. Such models provide a means to evaluate the effect of geologic constraints on coating occurrence and coating completeness required to preserve economically viable porosity and permeability (Begin page 302) in a given play or prospect. These constraints include thermal history and sandstone grain size and composition. The overall effect of hydrocarbon emplacement on reservoir quality is controversial. It appears that at least some cements (quartz and illite) may continue to precipitate following emplacement of hydrocarbons into the reservoir. Our work indicates that integration of basin modeling with reservoir quality modeling can be used to quantify, prior to drilling, the potential impact of hydrocarbon emplacement on porosity and permeability. The best-case scenario for significant reservoir quality preservation due to fluid overpressure development is in rapidly deposited Tertiary or Quaternary sandstones. Our models suggest that significant porosity can be preserved in sandstones that have experienced continuous high fluid overpressures from shallow burial depths. The models also indicate that the potential for porosity preservation is greatest in ductile-grain-rich sandstones because compaction tends to be the dominant control on reservoir quality in such rocks. The case for significant porosity preservation associated with fluid overpressures in pre-Tertiary basins, however, is more problematic because of the complexities in the history of fluid overpressure and the greater significance of quartz cementation as a potential mechanism of porosity loss.