Antenna theory : analysis and design
01 Jan 2005-
TL;DR: The most up-to-date resource available on antenna theory and design is the IEEE 802.11 as mentioned in this paper, which provides detailed coverage of ABET design procedures and equations, making meeting ABET requirements easy and preparing readers for authentic situations in industry.
Abstract: The most-up-to-date resource available on antenna theory and design. Expanded coverage of design procedures and equations makes meeting ABET design requirements easy and prepares readers for authentic situations in industry. New coverage of microstrip antennas exposes readers to information vital to a wide variety of practical applications.Computer programs at end of each chapter and the accompanying disk assist in problem solving, design projects and data plotting.-- Includes updated material on moment methods, radar cross section, mutual impedances, aperture and horn antennas, and antenna measurements.-- Outstanding 3-dimensional illustrations help readers visualize the entire antenna radiation pattern.
Citations
More filters
TL;DR: The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time.
Abstract: Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].
5,158 citations
TL;DR: Very large MIMO as mentioned in this paper is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation.
Abstract: This paper surveys recent advances in the area of very large MIMO systems.
With very large MIMO, we think of systems that use antenna arrays with an order of magnitude more elements than in systems being built today, say a hundred antennas or more. Very large MIMO entails an unprecedented number of antennas simultaneously serving a much smaller number of terminals. The disparity in number emerges as a desirable operating condition and a practical one as well. The number of terminals that can be simultaneously served is limited, not by the number of antennas, but rather by our inability to acquire channel-state information for an unlimited number of terminals. Larger numbers of terminals can always be accommodated by combining very large MIMO technology with conventional time- and frequency-division multiplexing via OFDM. Very large MIMO arrays is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation. The ultimate vision of very large MIMO systems is that the antenna array would consist of small active antenna units, plugged into an (optical) fieldbus.
2,717 citations
TL;DR: This article introduces a millimeter-wave mobile broadband (MMB) system as a candidate next generation mobile communication system and demonstrates the feasibility for MMB to achieve gigabit-per-second data rates at a distance up to 1 km in an urban mobile environment.
Abstract: Almost all mobile communication systems today use spectrum in the range of 300 MHz-3 GHz. In this article, we reason why the wireless community should start looking at the 3-300 GHz spectrum for mobile broadband applications. We discuss propagation and device technology challenges associated with this band as well as its unique advantages for mobile communication. We introduce a millimeter-wave mobile broadband (MMB) system as a candidate next generation mobile communication system. We demonstrate the feasibility for MMB to achieve gigabit-per-second data rates at a distance up to 1 km in an urban mobile environment. A few key concepts in MMB network architecture such as the MMB base station grid, MMB interBS backhaul link, and a hybrid MMB + 4G system are described. We also discuss beamforming techniques and the frame structure of the MMB air interface.
2,487 citations
TL;DR: The results show that, in order to mitigate interference, the altitude of the UAVs must be properly adjusted based on the beamwidth of the directional antenna as well as coverage requirements.
Abstract: In this letter, the efficient deployment of multiple unmanned aerial vehicles (UAVs) acting as wireless base stations that provide coverage for ground users is analyzed. First, the downlink coverage probability for UAVs as a function of the altitude and the antenna gain is derived. Next, using circle packing theory, the 3-D locations of the UAVs is determined in a way that the total coverage area is maximized while maximizing the coverage lifetime of the UAVs. Our results show that, in order to mitigate interference, the altitude of the UAVs must be properly adjusted based on the beamwidth of the directional antenna as well as coverage requirements. Furthermore, the minimum number of UAVs needed to guarantee a target coverage probability for a given geographical area is determined. Numerical results evaluate various tradeoffs.
982 citations
TL;DR: In this paper, the authors describe recent progress in the area of metasurfaces formed from plasmonic meta-atoms and identify some areas ripe for future research and indicate likely avenues for future device development.
Abstract: Metamaterials enable the tailoring of properties like dielectric permittivity and magnetic permeability. Electromagnetic excitations of metamaterial constituents and their interactions are reviewed, as well as promising future directions. Despite the extraordinary degree of interest in optical metamaterials in recent years, the hoped-for devices and applications have, in large part, yet to emerge. It is becoming clear that the first generation of metamaterial-based devices will most probably arise from their two-dimensional equivalents — metasurfaces. In this Review, we describe recent progress in the area of metasurfaces formed from plasmonic meta-atoms. In particular, we approach the subject from the perspective of the fundamental excitations supported by the meta-atoms and the interactions between them. We also identify some areas ripe for future research and indicate likely avenues for future device development.
858 citations