Atom-Resolved Imaging of Dynamic Shape Changes in Supported Copper Nanocrystals
15 Mar 2002-Science (American Association for the Advancement of Science)-Vol. 295, Iss: 5562, pp 2053-2055
TL;DR: In situ transmission electron microscopy is used to obtain atom-resolved images of copper nanocrystals on different supports, which are catalysts for methanol synthesis and hydrocarbon conversion processes for fuel cells.
Abstract: In situ transmission electron microscopy is used to obtain atom-resolved images of copper nanocrystals on different supports. These are catalysts for methanol synthesis and hydrocarbon conversion processes for fuel cells. The nanocrystals undergo dynamic reversible shape changes in response to changes in the gaseous environment. For zinc oxide-supported samples, the changes are caused both by adsorbate-induced changes in surface energies and by changes in the interfacial energy. For copper nanocrystals supported on silica, the support has negligible influence on the structure. Nanoparticle dynamics must be included in the description of catalytic and other properties of nanomaterials. In situ microscopy offers possibilities for obtaining the relevant atomic-scale insight.
Citations
More filters
TL;DR: In conclusion, MOFs as Host Matrices or Nanometric Reaction Cavities should not be considered as a source of concern in the determination of MOFs’ properties in relation to other materials.
Abstract: 2.2. MOFs with Metal Active Sites 4614 2.2.1. Early Studies 4614 2.2.2. Hydrogenation Reactions 4618 2.2.3. Oxidation of Organic Substrates 4620 2.2.4. CO Oxidation to CO2 4626 2.2.5. Phototocatalysis by MOFs 4627 2.2.6. Carbonyl Cyanosilylation 4630 2.2.7. Hydrodesulfurization 4631 2.2.8. Other Reactions 4632 2.3. MOFs with Reactive Functional Groups 4634 2.4. MOFs as Host Matrices or Nanometric Reaction Cavities 4636
3,106 citations
TL;DR: The first steps towards using computational methods to design new catalysts are reviewed and how, in the future, such methods may be used to engineer the electronic structure of the active surface by changing its composition and structure are discussed.
Abstract: Over the past decade the theoretical description of surface reactions has undergone a radical development. Advances in density functional theory mean it is now possible to describe catalytic reactions at surfaces with the detail and accuracy required for computational results to compare favourably with experiments. Theoretical methods can be used to describe surface chemical reactions in detail and to understand variations in catalytic activity from one catalyst to another. Here, we review the first steps towards using computational methods to design new catalysts. Examples include screening for catalysts with increased activity and catalysts with improved selectivity. We discuss how, in the future, such methods may be used to engineer the electronic structure of the active surface by changing its composition and structure.
3,023 citations
TL;DR: This work shows how to identify the crucial atomic structure motif for the industrial Cu/ZnO/Al2O3 methanol synthesis catalyst by using a combination of experimental evidence from bulk, surface-sensitive, and imaging methods collected on real high-performance catalytic systems in combination with density functional theory calculations.
Abstract: Unlike homogeneous catalysts, heterogeneous catalysts that have been optimized through decades are typically so complex and hard to characterize that the nature of the catalytically active site is not known. This is one of the main stumbling blocks in developing rational catalyst design strategies in heterogeneous catalysis. We show here how to identify the crucial atomic structure motif for the industrial Cu/ZnO/Al{sub 2}O{sub 3} methanol synthesis catalyst. Using a combination of experimental evidence from bulk-, surface-sensitive and imaging methods collected on real high-performance catalytic systems in combination with DFT calculations. We show that the active site consists of Cu steps peppered with Zn atoms, all stabilized by a series of well defined bulk defects and surface species that need jointly to be present for the system to work.
1,888 citations
TL;DR: Time-resolved, high-resolution in situ transmission electron microscope observations of the formation of carbon nanofibres from methane decomposition over supported nickel nanocrystals show that metallic step edges act as spatiotemporal dynamic growth sites and may be important for understanding other types of catalytic reactions and nanomaterial syntheses.
Abstract: The synthesis of carbon nanotubes with predefined structure and functionality plays a central role in the field of nanotechnology1,2, whereas the inhibition of carbon growth is needed to prevent a breakdown of industrial catalysts for hydrogen and synthesis gas production3. The growth of carbon nanotubes and nanofibres has therefore been widely studied4,5,6,7,8,9,10. Recent advances in in situ techniques now open up the possibility of studying gas–solid interactions at the atomic level11,12. Here we present time-resolved, high-resolution in situ transmission electron microscope observations of the formation of carbon nanofibres from methane decomposition over supported nickel nanocrystals. Carbon nanofibres are observed to develop through a reaction-induced reshaping of the nickel nanocrystals. Specifically, the nucleation and growth of graphene layers are found to be assisted by a dynamic formation and restructuring of mono-atomic step edges at the nickel surface. Density-functional theory calculations indicate that the observations are consistent with a growth mechanism involving surface diffusion of carbon and nickel atoms. The finding that metallic step edges act as spatiotemporal dynamic growth sites may be important for understanding other types of catalytic reactions and nanomaterial syntheses.
1,357 citations
Cites methods from "Atom-Resolved Imaging of Dynamic Sh..."
...The experiments are performed in an in situ transmission electron microscope (TEM...
[...]
TL;DR: X-ray absorption spectroscopy revealed that cobalt was metallic, even for small particle sizes, after the in situ reduction treatment, which is a prerequisite for catalytic operation and is difficult to achieve using traditional oxidic supports.
Abstract: The influence of cobalt particle size in the range of 2.6-27 nm on the performance in Fischer-Tropsch synthesis has been investigated for the first time using well-defined catalysts based on an inert carbon nanofibers support material. X-ray absorption spectroscopy revealed that cobalt was metallic, even for small particle sizes, after the in situ reduction treatment, which is a prerequisite for catalytic operation and is difficult to achieve using traditional oxidic supports. The turnover frequency (TOF) for CO hydrogenation was independent of cobalt particle size for catalysts with sizes larger than 6 nm (1 bar) or 8 nm (35 bar), while both the selectivity and the activity changed for catalysts with smaller particles. At 35 bar, the TOF decreased from 23 x 10(-3) to 1.4 x 10(-3) s(-1), while the C5+ selectivity decreased from 85 to 51 wt % when the cobalt particle size was reduced from 16 to 2.6 nm. This demonstrates that the minimal required cobalt particle size for Fischer-Tropsch catalysis is larger (6-8 nm) than can be explained by classical structure sensitivity. Other explanations raised in the literature, such as formation of CoO or Co carbide species on small particles during catalytic testing, were not substantiated by experimental evidence from X-ray absorption spectroscopy. Interestingly, we found with EXAFS a decrease of the cobalt coordination number under reaction conditions, which points to reconstruction of the cobalt particles. It is argued that the cobalt particle size effects can be attributed to nonclassical structure sensitivity in combination with CO-induced surface reconstruction. The profound influences of particle size may be important for the design of new Fischer-Tropsch catalysts.
1,326 citations
References
More filters
TL;DR: In this article, a system of chemical reactions has been developed which permits the controlled growth of spherical silica particles of uniform size by means of hydrolysis of alkyl silicates and subsequent condensation of silicic acid in alcoholic solutions.
12,884 citations
TL;DR: In this article, the authors focus on the properties of quantum dots and their ability to join the dots into complex assemblies creates many opportunities for scientific discovery, such as the ability of joining the dots to complex assemblies.
Abstract: Current research into semiconductor clusters is focused on the properties of quantum dots-fragments of semiconductor consisting of hundreds to many thousands of atoms-with the bulk bonding geometry and with surface states eliminated by enclosure in a material that has a larger band gap. Quantum dots exhibit strongly size-dependent optical and electrical properties. The ability to join the dots into complex assemblies creates many opportunities for scientific discovery.
10,737 citations
10 Jul 1997
TL;DR: This paper presents a meta-modelling system that automates the very labor-intensive and therefore time-heavy and therefore expensive and expensive process of characterization and activation of Solid Catalysts.
Abstract: Preparation of Solid Catalysts. Characterization of Solid Catalysts. Model Systems. Elementary Steps and Mechanisms. Kinetics and Transport Processes. Deactivation and Regeneration. Special Catalytic Systems. Laboratory Reactors. Reaction Engineering. Environmental Catalysis. Inorganic Reactions. Energy-related Catalysis. Organic Reactions.
4,227 citations
"Atom-Resolved Imaging of Dynamic Sh..." refers background in this paper
...The Cu/ ZnO system represents the industrial methanol synthesis catalyst ( 24 )....
[...]
TL;DR: This light-driven process results in a colloid with distinctive optical properties that directly relate to the nanoprism shape of the particles, which could be useful in developing multicolor diagnostic labels on the basis of nanoparticle composition and size but also of shape.
Abstract: A photoinduced method for converting large quantities of silver nanospheres into triangular nanoprisms is reported. The photo-process has been characterized by time-dependent ultraviolet-visible spectroscopy and transmission electron microscopy, allowing for the observation of several key intermediates in and characteristics of the conversion process. This light-driven process results in a colloid with distinctive optical properties that directly relate to the nanoprism shape of the particles. Theoretical calculations coupled with experimental observations allow for the assignment of the nanoprism plasmon bands and for the first identification of two distinct quadrupole plasmon resonances for a nanoparticle. Unlike the spherical particles they are derived from that Rayleigh light-scatter in the blue, these nanoprisms exhibit scattering in the red, which could be useful in developing multicolor diagnostic labels on the basis not only of nanoparticle composition and size but also of shape.
3,256 citations
TL;DR: Some of the observed new chemical, optical, and thermal properties of metallic nanocrystals when their size is confined to the nanometer length scale and their dynamical processes are observed on the femto- to picosecond time scale are described.
Abstract: The properties of a material depend on the type of motion its electrons can execute, which depends on the space available for them (i.e., on the degree of their spatial confinement). Thus, the properties of each material are characterized by a specific length scale, usually on the nanometer dimension. If the physical size of the material is reduced below this length scale, its properties change and become sensitive to its size and shape. In this Account we describe some of the observed new chemical, optical, and thermal properties of metallic nanocrystals when their size is confined to the nanometer length scale and their dynamical processes are observed on the femto- to picosecond time scale.
2,655 citations