Autonomic healing of polymer composites
TL;DR: A structural polymeric material with the ability to autonomically heal cracks is reported, which incorporates a microencapsulated healing agent that is released upon crack intrusion and polymerization of the healing agent is triggered by contact with an embedded catalyst, bonding the crack faces.
Abstract: Structural polymers are susceptible to damage in the form of cracks, which form deep within the structure where detection is difficult and repair is almost impossible. Cracking leads to mechanical degradation of fibre-reinforced polymer composites; in microelectronic polymeric components it can also lead to electrical failure. Microcracking induced by thermal and mechanical fatigue is also a long-standing problem in polymer adhesives. Regardless of the application, once cracks have formed within polymeric materials, the integrity of the structure is significantly compromised. Experiments exploring the concept of self-repair have been previously reported, but the only successful crack-healing methods that have been reported so far require some form of manual intervention. Here we report a structural polymeric material with the ability to autonomically heal cracks. The material incorporates a microencapsulated healing agent that is released upon crack intrusion. Polymerization of the healing agent is then triggered by contact with an embedded catalyst, bonding the crack faces. Our fracture experiments yield as much as 75% recovery in toughness, and we expect that our approach will be applicable to other brittle materials systems (including ceramics and glasses).
Citations
More filters
TL;DR: The current understanding on Li anodes is summarized, the recent key progress in materials design and advanced characterization techniques are highlighted, and the opportunities and possible directions for future development ofLi anodes in applications are discussed.
Abstract: Lithium-ion batteries have had a profound impact on our daily life, but inherent limitations make it difficult for Li-ion chemistries to meet the growing demands for portable electronics, electric vehicles and grid-scale energy storage. Therefore, chemistries beyond Li-ion are currently being investigated and need to be made viable for commercial applications. The use of metallic Li is one of the most favoured choices for next-generation Li batteries, especially Li-S and Li-air systems. After falling into oblivion for several decades because of safety concerns, metallic Li is now ready for a revival, thanks to the development of investigative tools and nanotechnology-based solutions. In this Review, we first summarize the current understanding on Li anodes, then highlight the recent key progress in materials design and advanced characterization techniques, and finally discuss the opportunities and possible directions for future development of Li anodes in applications.
4,302 citations
TL;DR: A transparent organic polymeric material that can repeatedly mend or “re-mend” itself under mild conditions and is a tough solid at room temperature and below with mechanical properties equaling those of commercial epoxy resins.
Abstract: We have developed a transparent organic polymeric material that can repeatedly mend or "re-mend" itself under mild conditions. The material is a tough solid at room temperature and below with mechanical properties equaling those of commercial epoxy resins. At temperatures above 120 degrees C, approximately 30% (as determined by solid-state nuclear magnetic resonance spectroscopy) of "intermonomer" linkages disconnect but then reconnect upon cooling, This process is fully reversible and can be used to restore a fractured part of the polymer multiple times, and it does not require additional ingredients such as a catalyst, additional monomer, or special surface treatment of the fractured interface.
2,154 citations
TL;DR: Electronic networks comprised of flexible, stretchable, and robust devices that are compatible with large-area implementation and integrated with multiple functionalities is a testament to the progress in developing an electronic skin akin to human skin.
Abstract: Human skin is a remarkable organ. It consists of an integrated, stretchable network of sensors that relay information about tactile and thermal stimuli to the brain, allowing us to maneuver within our environment safely and effectively. Interest in large-area networks of electronic devices inspired by human skin is motivated by the promise of creating autonomous intelligent robots and biomimetic prosthetics, among other applications. The development of electronic networks comprised of flexible, stretchable, and robust devices that are compatible with large-area implementation and integrated with multiple functionalities is a testament to the progress in developing an electronic skin (e-skin) akin to human skin. E-skins are already capable of providing augmented performance over their organic counterpart, both in superior spatial resolution and thermal sensitivity. They could be further improved through the incorporation of additional functionalities (e.g., chemical and biological sensing) and desired properties (e.g., biodegradability and self-powering). Continued rapid progress in this area is promising for the development of a fully integrated e-skin in the near future.
1,950 citations
TL;DR: A self-healing system capable of autonomously repairing repeated damage events via a three-dimensional microvascular network embedded in the substrate is reported, opening new avenues for continuous delivery of healing agents for self-repair as well as other active species for additional functionality.
Abstract: Self-healing polymers composed of microencapsulated healing agents exhibit remarkable mechanical performance and regenerative ability, but are limited to autonomic repair of a single damage event in a given location. Self-healing is triggered by crack-induced rupture of the embedded capsules; thus, once a localized region is depleted of healing agent, further repair is precluded. Re-mendable polymers can achieve multiple healing cycles, but require external intervention in the form of heat treatment and applied pressure. Here, we report a self-healing system capable of autonomously repairing repeated damage events. Our bio-inspired coating-substrate design delivers healing agent to cracks in a polymer coating via a three-dimensional microvascular network embedded in the substrate. Crack damage in the epoxy coating is healed repeatedly. This approach opens new avenues for continuous delivery of healing agents for self-repair as well as other active species for additional functionality.
1,415 citations
TL;DR: This critical review of recent developments in supramolecular polymeric materials is addressed, which can respond to appropriate external stimuli at the fundamental level due to the existence of noncovalent interactions of the building blocks.
Abstract: Supramolecular materials, dynamic materials by nature, are defined as materials whose components are bridged via reversible connections and undergo spontaneous and continuous assembly/disassembly processes under specific conditions. On account of the dynamic and reversible nature of noncovalent interactions, supramolecular polymers have the ability to adapt to their environment and possess a wide range of intriguing properties, such as degradability, shape-memory, and self-healing, making them unique candidates for supramolecular materials. In this critical review, we address recent developments in supramolecular polymeric materials, which can respond to appropriate external stimuli at the fundamental level due to the existence of noncovalent interactions of the building blocks.
1,343 citations
References
More filters
Book•
01 Jan 1982TL;DR: In this paper, the authors present numerical simulation of intergranular and transgranular crack propagation in ferroelectric polycrystals using double kink mechanisms for discrete dislocations in BCCs.
Abstract: Preface Numerical simulation of intergranular and transgranular crack propagation in ferroelectric polycrystals Microstructure and stray electric fields at surface cracks in ferroelectrics Double kink mechanisms for discrete dislocations in BCC crystals The expanding spherical inhomogeneity with transformation strain A new model of damage: a moving thick layer approach On configurational forces at boundaries in fracture mechanics HotQC simulation of nanovoid growth under tension in copper Coupled phase transformations and plasticity as a field theory of deformation incompatibility Continuum strain-gradient elasticity from discrete valence force field theory for diamond-like crystals
4,951 citations
"Autonomic healing of polymer compos..." refers methods in this paper
...Micromechanical modelling with the aid of the Eshelby–Mura equivalent inclusion metho...
[...]
TL;DR: A member of the steroid hormone receptor superfamily of ligand-activated transcription factors is cloned that is activated by a diverse class of rodent hepatocarcinogens that causes proliferation of peroxisomes.
Abstract: We have cloned a member of the steroid hormone receptor superfamily of ligand-activated transcription factors. The receptor homologue is activated by a diverse class of rodent hepatocarcinogens that causes proliferation of peroxisomes. Identification of a peroxisome proliferator-activated receptor should help elucidate the mechanism of the hypolipidaemic effect of these hepatocarcinogens and aid evaluation of their potential carcinogenic risk to man.
3,370 citations
TL;DR: Type-II noncollinear phase matching in parametric down conversion produces true entanglement: No part of the wave function must be discarded, in contrast to previous schemes.
Abstract: We report on a high-intensity source of polarization-entangled photon pairs with high momentum definition. Type-II noncollinear phase matching in parametric down conversion produces true entanglement: No part of the wave function must be discarded, in contrast to previous schemes. With two-photon fringe visibilities in excess of 97%, we demonstrated a violation of Bell's inequality by over 100 standard deviations in less than 5 min. The new source allowed ready preparation of all four of the EPR-Bell states.
2,639 citations
TL;DR: Crystal structures of the human estrogen receptor alpha (hER alpha) ligand-binding domain (LBD) and the OHT-LBD complex reveal the two distinct mechanisms by which structural features of OHT promote this "autoinhibitory" helix 12 conformation.
2,581 citations
TL;DR: Results indicate that SRC-1 encodes a coactivator that is required for full transcriptional activity of the steroid receptor superfamily.
Abstract: A yeast two-hybrid system was used to identify a protein that interacts with and enhances the human progesterone receptor (hPR) transcriptional activity without altering the basal activity of the promoter. Because the protein stimulated transactivation of all the steroid receptors tested, it has been termed steroid receptor coactivator-1 (SRC-1). Coexpression of SRC-1 reversed the ability of the estrogen receptor to squelch activation by hPR. Also, the amino terminal truncated form of SRC-1 acted as a dominant-negative repressor. Together, these results indicate that SRC-1 encodes a coactivator that is required for full transcriptional activity of the steroid receptor superfamily.
2,399 citations