scispace - formally typeset
Journal ArticleDOI

Batteries and Ultracapacitors for Electric, Hybrid, and Fuel Cell Vehicles

Andrew Burke
- Vol. 95, Iss: 4, pp 806-820
Reads0
Chats0
TLDR
In this paper, the authors focused on the use of lithium-ion batteries and carbon/carbon ultracapacitors as the energy storage technologies most likely to be used in future vehicles.
Abstract
The application of batteries and ultracapacitors in electric energy storage units for battery powered (EV) and charge sustaining and plug-in hybrid-electric (HEV and PHEV) vehicles have been studied in detail. The use of IC engines and hydrogen fuel cells as the primary energy converters for the hybrid vehicles was considered. The study focused on the use of lithium-ion batteries and carbon/carbon ultracapacitors as the energy storage technologies most likely to be used in future vehicles. The key findings of the study are as follows. 1) The energy density and power density characteristics of both battery and ultracapacitor technologies are sufficient for the design of attractive EVs, HEVs, and PHEVs. 2) Charge sustaining, engine powered hybrid-electric vehicles (HEVs) can be designed using either batteries or ultracapacitors with fuel economy improvements of 50% and greater. 3) Plug-in hybrids (PHEVs) can be designed with effective all-electric ranges of 30-60 km using lithium-ion batteries that are relatively small. The effective fuel economy of the PHEVs can be very high (greater than 100 mpg) for long daily driving ranges (80-150 km) resulting in a large fraction (greater than 75%) of the energy to power the vehicle being grid electricity. 4) Mild hybrid-electric vehicles (MHEVs) can be designed using ultracapacitors having an energy storage capacity of 75-150 Wh. The fuel economy improvement with the ultracapacitors is 10%-15% higher than with the same weight of batteries due to the higher efficiency of the ultracapacitors and more efficient engine operation. 5) Hybrid-electric vehicles powered by hydrogen fuel cells can use either batteries or ultracapacitors for energy storage. Simulation results indicate the equivalent fuel economy of the fuel cell powered vehicles is 2-3 times higher than that of a gasoline fueled IC vehicle of the same weight and road load. Compared to an engine-powered HEV, the equivalent fuel economy of the hydrogen fuel cell vehicle would be 1.66-2.0 times higher

read more

Citations
More filters
Journal ArticleDOI

Trends in Microgrid Control

TL;DR: The major issues and challenges in microgrid control are discussed, and a review of state-of-the-art control strategies and trends is presented; a general overview of the main control principles (e.g., droop control, model predictive control, multi-agent systems).
Journal ArticleDOI

Battery, Ultracapacitor, Fuel Cell, and Hybrid Energy Storage Systems for Electric, Hybrid Electric, Fuel Cell, and Plug-In Hybrid Electric Vehicles: State of the Art

TL;DR: In this paper, the authors present state-of-the-art energy storage topologies for hybrid electric vehicles and plug-in hybrid vehicles (PHEVs) and compare battery, UC, and fuel cell technologies.
Journal ArticleDOI

Energy Storage Systems for Transport and Grid Applications

TL;DR: This paper presents a review of ESSs for transport and grid applications, covering several aspects as the storage technology, the main applications, and the power converters used to operate some of the energy storage technologies.
Journal ArticleDOI

A review of energy sources and energy management system in electric vehicles

TL;DR: In this article, the state-of-the-art of the energy sources, storage devices, power converters, low-level control energy management strategies and high supervisor control algorithms used in electric vehicles are reviewed.
Journal ArticleDOI

Nanostructured carbon for energy storage and conversion

TL;DR: In this paper, a review article summarizes the recent research progress on the synthesis of nanostructured carbon and its application in energy storage and conversion, and the common challenges in developing simple, scalable, and environmentally friendly synthetic and manufacturing processes, in controlling the nanoscale and high level structures and functions, and in integrating such materials with suitable device architectures are reviewed.
References
More filters
Journal ArticleDOI

Technical cost analysis for PEM fuel cells

TL;DR: In this paper, it is shown that the target costs for fuel cell systems for the year 2004 as formulated by PNGV are $50kW −1, which can only be achieved with design changes that reduce the quantity of material used.
Proceedings ArticleDOI

The present and projected performance and cost of double-layer pseudo-capacitive ultracapacitors for hybrid vehicle applications

TL;DR: In this article, the performance of carbon/carbon double-layer and pseudo-capacitive ultracapacitors are assessed based primarily on testing done in the laboratory at UC Davis.
ReportDOI

SIMPLEV: A simple electric vehicle simulation program, Version 1.0

G.H. Cole
TL;DR: An electric vehicle simulation code which can be used with any IBM compatible personal computer was written and serves as a users` manual and documents the mathematical relationships used in the simulation.
Journal ArticleDOI

A dynamic simulation tool for hydrogen fuel cell vehicles

TL;DR: In this paper, the authors describe a dynamic fuel cell vehicle simulation (FCVSim) tool for the load-following direct-hydrogen (DH) fuel cell vehicles, where the focus is on simulation of the direct hydrogen fuel cell system.
Related Papers (5)