scispace - formally typeset
Search or ask a question
Journal ArticleDOI

BER sensitivity of OFDM systems to carrier frequency offset and Wiener phase noise

01 Feb 1995-IEEE Transactions on Communications (IEEE)-Vol. 43, Iss: 234, pp 191-193
TL;DR: In this contribution the transmission of M-PSK and M-QAM modulated orthogonal frequency division multiplexed (OFDM) signals over an additive white Gaussian noise (AWGN) channel is considered and the degradation of the bit error rate is evaluated.
Abstract: In this contribution the transmission of M-PSK and M-QAM modulated orthogonal frequency division multiplexed (OFDM) signals over an additive white Gaussian noise (AWGN) channel is considered. The degradation of the bit error rate (BER), caused by the presence of carrier frequency offset and carrier phase noise is analytically evaluated. It is shown that for a given BER degradation, the values of the frequency offset and the linewidth of the carrier generator that are allowed for OFDM are orders of magnitude smaller than for single carrier systems carrying the same bit rate. >
Citations
More filters
Journal ArticleDOI
01 Jan 2010
TL;DR: This tutorial paper aims at providing an overview of nonlinear equalization methods as a key ingredient in receivers of SCM for wideband transmission, and reviews both hybrid (with filters implemented both in time and frequency domain) and all-frequency-domain iterative structures.
Abstract: In recent years single carrier modulation (SCM) has again become an interesting and complementary alternative to multicarrier modulations such as orthogonal frequency division multiplexing (OFDM). This has been largely due to the use of nonlinear equalizer structures implemented in part in the frequency domain by means of fast Fourier transforms, bringing the complexity close to that of OFDM. Here a nonlinear equalizer is formed with a linear filter to remove part of intersymbol interference, followed by a canceler of remaining interference by using previous detected data. Moreover, the capacity of SCM is similar to that of OFDM in highly dispersive channels only if a nonlinear equalizer is adopted at the receiver. Indeed, the study of efficient nonlinear frequency domain equalization techniques has further pushed the adoption of SCM in various standards. This tutorial paper aims at providing an overview of nonlinear equalization methods as a key ingredient in receivers of SCM for wideband transmission. We review both hybrid (with filters implemented both in time and frequency domain) and all-frequency-domain iterative structures. Application of nonlinear frequency domain equalizers to a multiple input multiple output scenario is also investigated, with a comparison of two architectures for interference reduction. We also present methods for channel estimation and alternatives for pilot insertion. The impact on SCM transmission of impairments such as phase noise, frequency offset and saturation due to high power amplifiers is also assessed. The comparison among the considered frequency domain equalization techniques is based both on complexity and performance, in terms of bit error rate or throughput.

429 citations


Cites background from "BER sensitivity of OFDM systems to ..."

  • ...A further benefit of SCM is its greater robustness to frequency offset and phase noise than that of OFDM [17] (see also [18])....

    [...]

  • ...Thus phase noise and frequency offset cause intersubcarrier (and therefore intersymbol) interference to OFDM waveforms [17]....

    [...]

Journal ArticleDOI
TL;DR: Two blind carrier offset estimation algorithms are presented by exploiting the intrinsic structure information of OFDM signals to offer the accuracy of super resolution subspace methods, viz., MUSIC and ESPRIT, without involving computationally intensive subspace decompositions.
Abstract: While multipath induced phase rotations can be dealt with by differential encoding in orthogonal frequency division multiplexing (OFDM) communications, the loss of orthogonality due to the carrier offset must be compensated before discrete Fourier transform (DFT)-based demodulation can be performed. In this letter, we present a high-performance/low-complexity blind carrier offset estimation algorithm by exploiting intrinsic structure information of OFDM signals. The algorithm offers the accuracy of a super resolution subspace method, viz. MUSIC, without involving computationally intensive subspace decompositions.

404 citations


Cites background from "BER sensitivity of OFDM systems to ..."

  • ...A carrier offset at the receiver can cause losses in subcarrier orthogonality, and thus introduces interchannel interference (ICI) and severely degrades the system performance [ 3 ]....

    [...]

  • ...Despite its promises, studies have shown that OFDM is very sensitive to inaccurate frequency references [ 3 ]....

    [...]

Journal ArticleDOI
TL;DR: Low-complexity minimum mean-square error (MMSE) and decision-feedback equalizer (DFE) receivers for ICI suppression are developed and show that the DFE receiver can collect significant gains of ICI-impaired OFDM with affordable complexity.
Abstract: While rapid variations of the fading channel cause intercarrier interference (ICI) in orthogonal frequency-division multiplexing (OFDM), thereby degrading its performance considerably, they also introduce temporal diversity, which can be exploited to improve performance. We first derive a matched-filter bound (MFB) for OFDM transmissions over doubly selective Rayleigh fading channels, which benchmarks the best possible performance if ICI is completely canceled without noise enhancement. We then derive universal performance bounds which show that the time-varying channel causes most of the symbol energy to be distributed over a few subcarriers, and that the ICI power on a subcarrier mainly comes from several neighboring subcarriers. Based on this fact, we develop low-complexity minimum mean-square error (MMSE) and decision-feedback equalizer (DFE) receivers for ICI suppression. Simulations show that the DFE receiver can collect significant gains of ICI-impaired OFDM with affordable complexity. In the relatively low Doppler frequency region, the bit-error rate of the DFE receiver is close to the MFB.

403 citations


Cites background from "BER sensitivity of OFDM systems to ..."

  • ...While subcarriers in OFDM are orthogonal in the presence of a time-invariant channel, rapid channel variations over a symbol period destroy the orthogonality among subcarriers, and result in intercarrier interference (ICI) [14], [23], [24]....

    [...]

Journal ArticleDOI
TL;DR: This paper analyzes the performance of OFDM systems under phase noise and its dependence on the number of sub-carriers both in the presence and absence of a phase correction mechanism.
Abstract: Phase noise must be carefully considered when designing an OFDM-based communication system since an accurate prediction of the tolerable phase noise can allow the system and RF engineers to relax specifications. This paper analyzes the performance of OFDM systems under phase noise and its dependence on the number of sub-carriers both in the presence and absence of a phase correction mechanism. Besides some practical results are provided so as to give some insight into the phase noise spectral specifications that should be required of the local oscillator.

394 citations


Cites background from "BER sensitivity of OFDM systems to ..."

  • ...Phase noise effects in OFDM have been analyzed by several authors and the degradation introduced in the system by phase noise has been characterized for some particular [6]–[9]....

    [...]

Journal ArticleDOI
13 Aug 2007
TL;DR: It is demonstrated that the family of GA-aided MUDs is capable of achieving a near-optimum performance at the cost of a significantly lower computational complexity than that imposed by their optimum maximum-likelihood (ML) MUD aided counterparts.
Abstract: This overview portrays the evolution of orthogonal frequency division multiplexing (OFDM) research. The amelioration of powerful multicarrier OFDM arrangements with multiple-input multiple-output (MIMO) systems has numerous benefits, which are detailed in this treatise. We continue by highlighting the limitations of conventional detection and channel estimation techniques designed for multiuser MIMO OFDM systems in the so-called rank-deficient scenarios, where the number of users supported or the number of transmit antennas employed exceeds the number of receiver antennas. This is often encountered in practice, unless we limit the number of users granted access in the base station's or radio port's coverage area. Following a historical perspective on the associated design problems and their state-of-the-art solutions, the second half of this treatise details a range of classic multiuser detectors (MUDs) designed for MIMO-OFDM systems and characterizes their achievable performance. A further section aims for identifying novel cutting-edge genetic algorithm (GA)-aided detector solutions, which have found numerous applications in wireless communications in recent years. In an effort to stimulate the cross pollination of ideas across the machine learning, optimization, signal processing, and wireless communications research communities, we will review the broadly applicable principles of various GA-assisted optimization techniques, which were recently proposed also for employment in multiuser MIMO OFDM. In order to stimulate new research, we demonstrate that the family of GA-aided MUDs is capable of achieving a near-optimum performance at the cost of a significantly lower computational complexity than that imposed by their optimum maximum-likelihood (ML) MUD aided counterparts. The paper is concluded by outlining a range of future research options that may find their way into next-generation wireless systems.

376 citations

References
More filters
Journal ArticleDOI
TL;DR: The general technique of parallel transmission on many carriers, called multicarrier modulation (MCM), is explained, and the performance that can be achieved on an undistorted channel and algorithms for achieving that performance are discussed.
Abstract: The general technique of parallel transmission on many carriers, called multicarrier modulation (MCM), is explained. The performance that can be achieved on an undistorted channel and algorithms for achieving that performance are discussed. Ways of dealing with channel impairments and of improving the performance through coding are described, and implementation methods are considered. Duplex operation of MCM and the possible use of this on the general switched telephone network are examined. >

3,995 citations

Journal ArticleDOI
TL;DR: A discrete multitone (DMT) transceiver design for high bit rate digital subscriber line (HDSL) access is presented and analyzed and is an excellent candidate for HDSL implementation.
Abstract: A discrete multitone (DMT) transceiver design for high bit rate digital subscriber line (HDSL) access is presented and analyzed. The DMT transmitter and receiver structure and algorithms are detailed, and the computational requirements of DMT for HDSL are estimated. At a sampling rate of 640 kHz, using an appropriate combination of a short finite-impulse-response (FIR) equalizer and a length-512 DMT system, 1.6 Mb/s data transmission is possible within the carrier serving area (CSA) at an error rate of 10/sup -7/ on a single twisted pair. A significant performance margin can be achieved when two coordinated twisted pairs are used to deliver a total data rate of 1.6 Mb/s. In terms of a performance-per-computation figure of merit, the DMT system is an excellent candidate for HDSL implementation. >

549 citations

Proceedings ArticleDOI
02 Dec 1991
TL;DR: A static code design with unequal error protection (UEP) is presented that also takes auxiliary data services into account and emphasis is on the use of source-adapted channel coding with rate-compatible punctured convolutional (RCPC) codes.
Abstract: A system proposal for DAB is investigated. The kernel is orthogonal frequency division multiplexing (OFDM) with 4-DPSK (differential phase shift keying) modulation, rectangular pulse-shaping, and a guard interval to reject multipath distortions. Emphasis is on the use of source-adapted channel coding with rate-compatible punctured convolutional (RCPC) codes. Based on analytical and simulated BER (bit error rate) curves for several propagation conditions and on preliminary source significance information (SSI), a static code design with unequal error protection (UEP) is presented that also takes auxiliary data services into account. The gain due to UEP is on the order of 8dB in signal power or 25% in bandwidth. >

69 citations

Journal ArticleDOI
TL;DR: By means of theoretical analysis, it is demonstrated that even simple interpolators, operating at only a few samples per symbol, yield BER degradations that are limited to a small fraction of a dB.
Abstract: This paper deals with the bit error rate (BER) performance of a fully digitally implemented receiver performing coherent detection on a narrowband BPSK or (O)QPSK signal, transmitted over a slow non-frequency selective Rician fading channel. The considered digital receiver operates on samples of the received signal, taken by a fixed clock which is not synchronized to the transmitter clock. Signal samples needed for detection of the information sequence are obtained from interpolation between the available samples. In the case of nonideal interpolation a BER degradation occurs. By means of theoretical analysis, we demonstrate that even simple interpolators, operating at only a few samples per symbol, yield BER degradations that are limited to a small fraction of a dB. This paper is an extension of the work of Erup, Gardner and Harris (see ibid., vol.41, no.6, p.998-1008, 1993) where only the AWGN channel was considered and results were obtained by computer simulations. >

22 citations

Journal ArticleDOI
TL;DR: This contribution deals with the digital broadcasting of HDTV channels over the cable television (CATV) distribution system, using either single-carrier QAM or an orthogonal frequency division multiplex of many QAM carriers to represent an HDTV channel.
Abstract: This contribution deals with the digital broadcasting of HDTV channels over the cable television (CATV) distribution system, using either single-carrier QAM or an orthogonal frequency division multiplex (OFDM) of many QAM carriers to represent an HDTV channel. Assuming that no error-correcting codes are used, we investigate two distinct cases: in the first case, a few HDTV channels are transmitted among many analog TV channels, whereas in the second case all transmitted channels are HDTV channels. We show that in the first case the transmit power of an HDTV channel can be substantially reduced (by about 10 dB or more) as compared to the transmit power of an analog TV channel, while still maintaining a satisfactory bit error rate (BER). In the second case, not only a considerable reduction of the total transmit power but also a reduction of amplifier cost and an increase of the number of TV channels can be achieved. Single-carrier QAM is found to perform slightly better (at most about 1 or 2 dB) than a multi-carrier QAM.

12 citations