Biocomposites reinforced with natural fibers: 2000–2010
TL;DR: A comprehensive review of literature on bio-fiber reinforced composites is presented in this paper, where the overall characteristics of reinforcing fibers used in biocomposites, including source, type, structure, composition, as well as mechanical properties, are reviewed.
About: This article is published in Progress in Polymer Science.The article was published on 2012-11-01. It has received 3074 citations till now. The article focuses on the topics: Biocomposite & Transfer molding.
Citations
More filters
TL;DR: Lignin is one of the three major components found in the cell walls of natural lignocellulosic materials and is widely available as a major byproduct of a number of industries involved in retrieving the polysaccharide components of plants for industrial applications, such as in paper making, ethanol production from biomass, etc.
Abstract: Rising environmental concerns and depletion of petro-chemical resources has resulted in an increased interest in biorenewable polymer-based environmentally friendly materials. Among biorenewable polymers, lignin is the second most abundant and fascinating natural polymer next to cellulose. Lignin is one of the three major components found in the cell walls of natural lignocellulosic materials. Lignin is widely available as a major byproduct of a number of industries involved in retrieving the polysaccharide components of plants for industrial applications, such as in paper making, ethanol production from biomass, etc. The impressive properties of lignin, such as its high abundance, low weight, environmentally friendliness and its antioxidant, antimicrobial, and biodegradable nature, along with its CO2 neutrality and reinforcing capability, make it an ideal candidate for the development of novel polymer composite materials. Considerable efforts are now being made to effectively utilize waste lignin as one ...
1,065 citations
TL;DR: A comprehensive review of the most appropriate and widely used natural fiber reinforced polymer composites (NFPCs) and their applications is presented in this paper. But, the results of the review are limited due to the high water absorption, inferior fire resistance, and lower mechanical properties of NFPCs.
Abstract: Natural fibers are getting attention from researchers and academician to utilize in polymer composites due to their ecofriendly nature and sustainability. The aim of this review article is to provide a comprehensive review of the foremost appropriate as well as widely used natural fiber reinforced polymer composites (NFPCs) and their applications. In addition, it presents summary of various surface treatments applied to natural fibers and their effect on NFPCs properties. The properties of NFPCs vary with fiber type and fiber source as well as fiber structure. The effects of various chemical treatments on the mechanical and thermal properties of natural fibers reinforcements thermosetting and thermoplastics composites were studied. A number of drawbacks of NFPCs like higher water absorption, inferior fire resistance, and lower mechanical properties limited its applications. Impacts of chemical treatment on the water absorption, tribology, viscoelastic behavior, relaxation behavior, energy absorption flames retardancy, and biodegradability properties of NFPCs were also highlighted. The applications of NFPCs in automobile and construction industry and other applications are demonstrated. It concluded that chemical treatment of the natural fiber improved adhesion between the fiber surface and the polymer matrix which ultimately enhanced physicomechanical and thermochemical properties of the NFPCs.
1,022 citations
Cites background from "Biocomposites reinforced with natur..."
...This structure gives to thermoset polymer good properties such as high flexibility for tailoring desired ultimate properties, great strength, and modulus [3, 4]....
[...]
...At 65% humidity at 21C, the equilibrium moisture content of some natural fiber can be observed in Table 4 [4]....
[...]
...The plants, which produce cellulose fibers can be classified into bast fibers (jute, flax, ramie, hemp, and kenaf), seed fibers (cotton, coir, and kapok), leaf fibers (sisal, pineapple, and abaca), grass and reed fibers (rice, corn, and wheat), and core fibers (hemp, kenaf, and jute) as well as all other kinds (wood and roots) [4]....
[...]
...Table 1: Natural fibers in the world and their world production [4]....
[...]
...Table 2: Chemical composition of some common natural fibers [4]....
[...]
TL;DR: In this paper, a brief outline of work that covers in the area of biocomposites, major class of biodegradable polymers, natural fibres, as well as their manufacturing techniques and properties has been highlighted.
Abstract: The growing ecological and environmental consciousness has driven efforts for development of new innovative materials for various end-use applications. Polymers synthesized from natural resources, have gained considerable research interest in the recent years. This review paper is intended to provide a brief outline of work that covers in the area of biocomposites, major class of biodegradable polymers, natural fibres, as well as their manufacturing techniques and properties has been highlighted. Various surface modification methods were incorporated to improve the fibre–matrix adhesion resulting in the enhancement of mechanical properties of the biocomposites. Moreover, an economical impact and future direction of these materials has been critically reviewed. This review concludes that the biocomposites form one of the emerging areas in polymer science that gain attention for use in various applications ranging from automobile to the building industries.
894 citations
TL;DR: The prime aim of this review article is to demonstrate the recent development and emerging applications of natural cellulose fibers and their polymer materials.
775 citations
TL;DR: It is evident from the literature survey presented herein that modified cellulose-based adsorbents exhibit good potential for the removal of various aquatic pollutants, however, still there is a need to find out the practical utility of these adsorbent on a commercial scale, leading to the improvement of pollution control.
747 citations
Additional excerpts
...4 glycosidic linkages (Faruk et al., 2012; Henriksson and Berglund, 2007; O'Connell et al., 2008) (Fig....
[...]
References
More filters
TL;DR: In this paper, Fourier transform infrared (FTIR) spectroscopy is used to monitor the development of degradation products, such as carbonyl groups and vinyl groups, and to determine changes in HDPE crystallinity.
45 citations
TL;DR: In this paper, the dynamic dielectrical analysis of short palm tree lignocellulosic fiber-reinforced polyester composites was carried out with special reference to the effect of fiber orientation, frequency, and temperature.
Abstract: The dynamic dielectrical analysis of short palm tree lignocellulosic fiber-reinforced polyester composites was carried out with special reference to the effect of fiber orientation, frequency, and temperature. Measurements were performed in the temperature range 40—200°C and in the frequency range 1—100 kHz. Three relaxations processes were identified, namely the orientation polarization imputed to the presence of polar water molecules in palm fiber, the relaxation process associated with conductivity occurring as a result of the carriers charges diffusion noted for high temperature above glass transition and low frequencies, and the interfacial or Maxwell—Wagner—Sillars relaxation that is attributable to the accumulation of charges at the palm fibers/polyester interfaces. The orientation of the fiber can strongly influence the dielectrical properties and interfacial polarization processes in composites.
45 citations
"Biocomposites reinforced with natur..." refers background in this paper
...The influence of chemical modification on oil palm/phenol formaldehyde composites [167], a comparison of epoxy and polyester matrixes reinforced with oil palm fibers [168], dielectric relaxation properties of oil palm/polyester resin composites [169], the effect of palm tree fiber orientation on dynamic electrical properties of palm tree fiber-reinforced polyester composites [170] have also been investigated....
[...]
TL;DR: In this article, raw and dewaxed jute felt composites were prepared with resol and lignin modified phenol formaldehyde resin, and the thermal stability of the composites was assessed by DSC and TGA.
Abstract: Raw and dewaxed jute felt composites were prepared with resol and lignin modified phenol formaldehyde resin. Four different types of lignin modified resins were used by replacing phenol with lignin. The lignin modified resins were prepared from purified lignin obtained from paper industry waste black liquor. To investigate bonding between jute and resin, IR spectroscopy of jute felts and composites was carried out. The thermal stability of the composites was assessed by DSC and TGA. It was found that the lignin resin jute composite is thermally more stable than resol composite. XRD of jute felt and composite shows that the crystallinity of the jute fiber increases after composite preparation. The lignin resin composites were tested for water absorption and thickness swelling, and it was found that the results are comparable with those of resol jute composite. Composites prepared from lignin phenol formaldehyde resin with 50% phenol replacement has shown 75% tensile strength retention to that of pure resol jute composite.
43 citations
TL;DR: In this article, raw and modified jute fiber was used to prepare composites by mixing with polypropylene (PP) plastic in different weight fractions (20, 25, 30, and 35%).
Abstract: Raw jute fiber was treated with o-hydroxybenzenediazonium salt (o-HBDS) in alkaline media. Raw and modified jute fiber were used to prepare composites by mixing with polypropylene (PP) plastic in different weight fractions (20, 25, 30, and 35%) of jute fiber. The mechanical properties except elongation at break of o-HBDS-treated (in alkaline medium) jute fiber-PP composite were higher than those of PP alone, raw jute fiber-PP composites, and alkali-treated jute fiber-PP composites. The elongation at break of treated jute-PP composite decreased to a large extent as compared to that of PP. The increase of tensile strength, tensile modulus, flexural strength, flexural modulus, and Charpy impact strength were found to be exceptionally high (in some cases ~200%) as compared to those of literature values.
43 citations
TL;DR: In this article, the effect of fiber length and fiber content on tensile strength and impact strength of PLLA-PCL/RF was discussed, including the influence of the use of silane coupling agent (KH550) for improved interfacial adhesion.
Abstract: Thermoplastic biodegradable composites based on ramie fibre (RF) and a poly(l-lactic acid)-poly(e-caprolactone) (PLLA-PCL) matrix was manufactured using the in situ polymerization method. In order to improve the compatibility and strengthen the interface in natural fibre composite materials, the RF was firstly treated by coupling agents. Then the RF reinforced thermoplastic PLLA-PCL composite was prepared by in situ polymerization of PLLA oligomer with NCO-terminated PCL prepolymer. The effect of fibre length and fibre content on tensile strength and impact strength of this natural-fibre-reinforced biodegradable composite (PLLA-PCL/RF) was discussed, including the influence of the use of silane coupling agent (KH550) for improved interfacial adhesion. The results showed that the tensile strength and impact strength of PLLA-PCL/RF were highest when the RF length was 5-6mm, RF content was 45% and with KH550 as surface treatment agent of RF.
43 citations