Biomaterials for Periodontal and Peri-Implant Regeneration.
TL;DR: In this paper, the authors summarized clinical findings and future developments regarding grafts, membranes, molecules, and emerging therapies, and concluded that a tailor-made approach for each patient is essential to obtain a reliable result and the combination of several biomaterials is the elective choice in several conditions.
Abstract: Periodontal and peri-implant regeneration is the technique that aims to restore the damaged tissue around teeth and implants. They are surrounded by a different apparatus, and according to it, the regenerative procedure can differ for both sites. During the last century, several biomaterials and biological mediators were proposed to achieve a complete restoration of the damaged tissues with less invasiveness and a tailored approach. Based on relevant systematic reviews and articles searched on PubMed, Scopus, and Cochrane databases, data regarding different biomaterials were extracted and summarized. Bone grafts of different origin, membranes for guided tissue regeneration, growth factors, and stem cells are currently the foundation of the routinary clinical practice. Moreover, a tailored approach, according to the patient and specific to the involved tooth or implant, is mandatory to achieve a better result and a reduction in patient morbidity and discomfort. The aim of this review is to summarize clinical findings and future developments regarding grafts, membranes, molecules, and emerging therapies. In conclusion, tissue engineering is constantly evolving; moreover, a tailor-made approach for each patient is essential to obtain a reliable result and the combination of several biomaterials is the elective choice in several conditions.
Citations
More filters
TL;DR: An overview of chitosan-based biomaterials for bone tissue engineering can be found in this paper, where the authors present an overview of the current state-of-the-art and future directions in the field of bone regeneration.
Abstract: Conventional bone grafting procedures used to treat bone defects have several limitations. An important aspect of bone tissue engineering is developing novel bone substitute biomaterials for bone grafts to repair orthopedic defects. Considerable attention has been given to chitosan, a natural biopolymer primarily extracted from crustacean shells, which offers desirable characteristics, such as being biocompatible, biodegradable, and osteoconductive. This review presents an overview of the chitosan-based biomaterials for bone tissue engineering (BTE). It covers the basic knowledge of chitosan in terms of biomaterials, the traditional and novel strategies of the chitosan scaffold fabrication process, and their advantages and disadvantages. Furthermore, this paper integrates the relevant contributions in giving a brief insight into the recent research development of chitosan-based scaffolds and their limitations in BTE. The last part of the review discusses the next-generation smart chitosan-based scaffold and current applications in regenerative dentistry and future directions in the field of mineralized tissue regeneration.
29 citations
TL;DR: In this paper, the authors discuss the properties and clinical indications of polymeric scaffold materials and extracellular matrix technologies for DOC regenerative medicine, and highlight the key properties, advantages and drawbacks of natural polymers including alginate, cellulose, chitosan, silk, collagen, gelatin, fibrin, laminin, decellularized extracecellular matrix, and hyaluronic acid.
Abstract: Dental, oral, and craniofacial (DOC) regenerative medicine aims to repair or regenerate DOC tissues including teeth, dental pulp, periodontal tissues, salivary gland, temporomandibular joint (TMJ), hard (bone, cartilage), and soft (muscle, nerve, skin) tissues of the craniofacial complex. Polymeric materials have a broad range of applications in biomedical engineering and regenerative medicine functioning as tissue engineering scaffolds, carriers for cell-based therapies, and biomedical devices for delivery of drugs and biologics. The focus of this review is to discuss the properties and clinical indications of polymeric scaffold materials and extracellular matrix technologies for DOC regenerative medicine. More specifically, this review outlines the key properties, advantages and drawbacks of natural polymers including alginate, cellulose, chitosan, silk, collagen, gelatin, fibrin, laminin, decellularized extracellular matrix, and hyaluronic acid, as well as synthetic polymers including polylactic acid (PLA), polyglycolic acid (PGA), polycaprolactone (PCL), poly (ethylene glycol) (PEG), and Zwitterionic polymers. This review highlights key clinical applications of polymeric scaffolding materials to repair and/or regenerate various DOC tissues. Particularly, polymeric materials used in clinical procedures are discussed including alveolar ridge preservation, vertical and horizontal ridge augmentation, maxillary sinus augmentation, TMJ reconstruction, periodontal regeneration, periodontal/peri-implant plastic surgery, regenerative endodontics. In addition, polymeric scaffolds application in whole tooth and salivary gland regeneration are discussed.
29 citations
TL;DR: Examining the biogenesis of the platelets and the biological role in the inflammatory and reparative processes and clinical point of view, through the platelet’ pathology and their use as platelets concentrates in dental regenerative surgery.
Abstract: Platelets are a cellular subgroup of elements circulating in the bloodstream, responsible for the innate immunity and repairing processes. The diseases affecting this cellular population, depending on the degree, can vary from mild to severe conditions, which have to be taken into consideration in cases of minor dental procedures. Their secretion of growth factors made them useful in the regenerative intervention. The aim of this review is to examine the platelets from biological, examining the biogenesis of the platelets and the biological role in the inflammatory and reparative processes and clinical point of view, through the platelets’ pathology and their use as platelets concentrates in dental regenerative surgery.
8 citations
TL;DR: Evaluating the biomorphological reaction of periodontal fibroblast cultures in contact with different DBBM particles treated with a low-temperature protocol (Thermagen®) and without exposure to sodium hydroxide (NaOH) showed positive morphological reactions with no differences in the sizes of particles.
Abstract: Several types of deproteinised bovine bone mineral (DBBM) are available on the market, and each one is obtained with a thermic and chemical process that can differ, achieving different results. Currently, several protocols using low temperature are suggested to reduce the possible particle crystallisation during the production process. This study aimed to evaluate the biomorphological reaction of periodontal fibroblast cultures in contact with different DBBM particles treated with a low-temperature protocol (Thermagen®) and without exposure to sodium hydroxide (NaOH). Morphological evaluation was performed using light, confocal laser, and scanning electron microscopy, and the biological reaction in terms of proliferation was performed using an XTT proliferation assay at 24 h (T1), 72 h (T2), and 7 days (T3). The morphological analysis highlighted how the presence of the materials stimulated a change in the morphology of the cells into a polygonal shape, surface reactions with the thickening of the membrane, and expression of actin. In particular, the morphological changes were appreciable from T1, with a progressive increase in the considered morphological characteristics at T2 and T3 follow-ups. The proliferation assay showed a statistical significance between the different experimental materials and the negative control in T2 and T3 follow-ups. The post hoc analysis did not reveal any differences between the materials. In conclusion, the grafts obtained with the low-temperature extractions protocol and not exposed to NaOH solution showed positive morphological reactions with no differences in the sizes of particles.
6 citations
TL;DR: The ultimate goal of periodontal therapy is homeostatic regeneration of lost attachment of alveolar bone and gingival connective tissue to the exposed root surfaces.
3 citations
References
More filters
TL;DR: Differentiation of the osteoprogenitor cell is elicited by local alterations in cell metabolic cycles that are as yet uncharacterized and may transfer collagenolytic activity to the substrate to cause dissolution of the matrix.
Abstract: Wandering histiocytes, foreign body giant cells, and inflammatory connective-tissue cells are stimulated by degradation products of dead matrix to grow in and repopulate the area of an implant of decalcified bone. Histiocytes are more numerous than any other cell form and may transfer collagenolytic activity to the substrate to cause dissolution of the matrix. The process is followed immediately by new-bone formation by autoinduction in which both the inductor cells and the induced cells are derived from ingrowing cells of the host bed. The inductor cell is a descendant of a wandering histiocyte; the induced cell is a fixed histiocyte or perivascular young connective-tissue cell. Differentiation of the osteoprogenitor cell is elicited by local alterations in cell metabolic cycles that are as yet uncharacterized.
5,083 citations
TL;DR: In a retrospective review of 414 consecutive cases of iliac crest bone graft procedures performed at Brooke Army Medical Center from 1983 to 1993, 41 (10%) minor and 24 (5.8%) major complications were identified.
Abstract: Autologous bone grafts harvested from the iliac crest are commonly used in reconstructive orthopaedic surgery. Autologous bone is used to help promote bone healing in fractures and to provide structural support for reconstructive surgery. The results of autologous bone grafting are more predictable than the use of xenografts, cadaveric allografts, or synthetic bone substitutes because autologous bone grafts provide osteoinductive and osteoconductive properties, are not immunogenic, and are usually well incorporated into the graft site. In a retrospective review of 414 consecutive cases of iliac crest bone graft procedures performed at Brooke Army Medical Center from 1983 to 1993, 41 (10%) minor and 24 (5.8%) major complications were identified. Minor complications included superficial infections, superficial seromas, and minor hematomas. Major complications included herniation of abdominal contents through massive bone graft donor sites, vascular injuries, deep infections at the donor site, neurologic injuries, deep hematoma formation requiring surgical intervention, and iliac wing fractures. Harvesting of iliac crest bone graft can be associated with significant morbidity. However, with adequate preoperative planning and proper surgical technique, the incidence of these complications can be reduced.
1,419 citations
TL;DR: It was demonstrated that marked dimensional alterations occurred during the first 8 weeks following the extraction of mandibular premolars, and there was a marked osteoclastic activity resulting in resorption of the crestal region of both the buccal and the lingual bone wall.
Abstract: Objective: To study dimensional alterations of the alveolar ridge that occurred following tooth extraction as well as processes of bone modelling and remodelling associated with such change.
Material and Methods: Twelve mongrel dogs were included in the study. In both quadrants of the mandible incisions were made in the crevice region of the 3rd and 4th premolars. Minute buccal and lingual full thickness flaps were elevated. The four premolars were hemi-sected. The distal roots were removed. The extraction sites were covered with the mobilized gingival tissue. The extractions of the roots and the sacrifice of the dogs were staggered in such a manner that all dogs contributed with sockets representing 1, 2, 4 and 8 weeks of healing. The animals were sacrificed and tissue blocks containing the extraction socket were dissected, decalcified in EDTA, embedded in paraffin and cut in the buccal–lingual plane. The sections were stained in haematoxyline–eosine and examined in the microscope.
Results: It was demonstrated that marked dimensional alterations occurred during the first 8 weeks following the extraction of mandibular premolars. Thus, in this interval there was a marked osteoclastic activity resulting in resorption of the crestal region of both the buccal and the lingual bone wall. The reduction of the height of the walls was more pronounced at the buccal than at the lingual aspect of the extraction socket. The height reduction was accompanied by a “horizontal” bone loss that was caused by osteoclasts present in lacunae on the surface of both the buccal and the lingual bone wall.
Conclusions: The resorption of the buccal/lingual walls of the extraction site occurred in two overlapping phases. During phase 1, the bundle bone was resorbed and replaced with woven bone. Since the crest of the buccal bone wall was comprised solely of bundle this modelling resulted in substantial vertical reduction of the buccal crest. Phase 2 included resorption that occurred from the outer surfaces of both bone walls. The reason for this additional bone loss is presently not understood.
1,308 citations
TL;DR: In this review, the major materials and technology advances within the last five years for each of the common 3D Printing technologies (Three Dimensional Printing, Fused Deposition Modeling, Selective Laser Sintering, Stereolithography, and 3D Plotting/Direct-Write/Bioprinting) are described.
Abstract: 3D Printing promises to produce complex biomedical devices according to computer design using patient-specific anatomical data. Since its initial use as pre-surgical visualization models and tooling molds, 3D Printing has slowly evolved to create one-of-a-kind devices, implants, scaffolds for tissue engineering, diagnostic platforms, and drug delivery systems. Fueled by the recent explosion in public interest and access to affordable printers, there is renewed interest to combine stem cells with custom 3D scaffolds for personalized regenerative medicine. Before 3D Printing can be used routinely for the regeneration of complex tissues (e.g. bone, cartilage, muscles, vessels, nerves in the craniomaxillofacial complex), and complex organs with intricate 3D microarchitecture (e.g. liver, lymphoid organs), several technological limitations must be addressed. In this review, the major materials and technology advances within the last five years for each of the common 3D Printing technologies (Three Dimensional Printing, Fused Deposition Modeling, Selective Laser Sintering, Stereolithography, and 3D Plotting/Direct-Write/Bioprinting) are described. Examples are highlighted to illustrate progress of each technology in tissue engineering, and key limitations are identified to motivate future research and advance this fascinating field of advanced manufacturing.
1,288 citations
937 citations