Bismuth and Titanium Phosphinates: Isolation of Tetra-, Hexa- and Octanuclear Clusters
TL;DR: The reaction of organobismuth precursors with trityl-H-phosphinic acid in varying reaction conditions afforded colorless crystals, whose single crystal X-ray characterization revealed the formation of monomer.
Abstract: The reaction of organobismuth precursors with trityl-H-phosphinic acid in varying reaction conditions afforded colorless crystals, whose single crystal X-ray characterization revealed the formation of monomer {(Ph3Bi)[(Ph3C)(H)PO2]2}·3/2(CH3CN)2.1/2H2O (1) and butterfly shaped tetranuclear cluster Bi4(μ3-O)2[(Ph3C)(H)(PO2)]8·2CH2Cl2·1/2CH3CN.2H2O (2). The reaction of titanium isopropoxide with two different phosphinic acids trityl-H-phosphinic acid and cycP(O)(OH) led to isolation of cubane type octahedral complex {Ti8(μ2-O)8(μ2-OH)4[(Ph3C)(H)PO2]12}[3C7H8] (3) and hexanuclear complex Ti6(μ2-cycPO2)9(μ2-O)6(μ2-OH)3·4CH3CN·4H2O (4) respectively.
Citations
More filters
01 Jan 2009
TL;DR: The magnet-like behavior can be observed by slow relaxation of the magnetization below the blocking temperature as mentioned in this paper, and this assumption has formed the basis for the understanding of the origin of the anisotropic barrier.
Abstract: The magnet-like behavior can beobserved by slow relaxation of the magnetization below theblocking temperature. Since the discovery of SMMs in theearly 1990s, this assumption has formed the basis for theunderstanding of the origin of the anisotropic barrier.However, in recent years the development of novel lantha-nide-only SMMs that challenge and defy this theory pose anumber of questions:
495 citations
TL;DR: In this article, a detailed review and categorization of known homometallic titanium oxo clusters is presented, and basic construction principles are compared by comparing the different cluster types, including residual OR groups, carboxylato and phosphonato ligands.
Abstract: Homometallic titanium oxo clusters are one of the most important groups of metal oxo clusters, with more than 300 examples characterized by X-ray structure analyses. Most of them are uncharged and are obtained by partial hydrolysis and condensation of titanium alkoxo derivatives. The cluster cores, ranging from 3 to >50 titanium atoms, are stabilized by organic ligands. Apart from residual OR groups, carboxylato and phosphonato ligands are most frequent. The article critically reviews and categorizes the known structures and works out basic construction principles by comparing the different cluster types.
25 citations
01 Mar 2011
TL;DR: Compound 1 displays high air and water stability and is also thermally robust, properties needed of electrolytes for their possible use as electrolytes and/or additives in lithium-ion battery applications.
Abstract: The novel organophosphorus-containing lithium salt Li(THF)[(C(2)O(4))B(O(2)PPh(2))(2)] (1; THF = tetrahydrofuran) was synthesized and characterized using a variety of spectroscopic techniques. An X-ray structural analysis on crystals of 1 grown from THF reveals a dimeric structure [Li(THF)(C(2)O(4))B(O(2)PPh(2))(2)](2)·THF, whereby the two units of 1 are bridged via P-O···Li interactions. Compound 1 displays high air and water stability and is also thermally robust, properties needed of electrolytes for their possible use as electrolytes and/or additives in lithium-ion battery applications.
11 citations
TL;DR: In this article , the authors reinterpret and connect these fascinating metal clusters from the perspective of Platonic and Archimedean solid characteristics, focusing on highly symmetrical and complex metal-containing (metal = Al, Ti, V, Mo, W, U, Mn, Fe, Co, Ni, Pd, Pt, Cu, Ag, Au, lanthanoids (Ln), and actinoids) high nuclearity clusters, including metal-oxo/hydroxide/chalcogenide clusters and metal clusters (with metal-metal binding) protected by surface organic ligands, such as thiolate, phosphine, alkynyl, carbonyl and nitrogen/oxygen donor ligands.
Abstract: Metal-containing clusters have attracted increasing attention over the past 2-3 decades. This intense interest can be attributed to the fact that these discrete metal aggregates, whose atomically precise structures are resolved by single-crystal X-ray diffraction (SCXRD), often possess intriguing geometrical features (high symmetry, aesthetically pleasing shapes and architectures) and fascinating physical properties, providing invaluable opportunities for the intersection of different disciplines including chemistry, physics, mathematical geometry and materials science. In this review, we attempt to reinterpret and connect these fascinating clusters from the perspective of Platonic and Archimedean solid characteristics, focusing on highly symmetrical and complex metal-containing (metal = Al, Ti, V, Mo, W, U, Mn, Fe, Co, Ni, Pd, Pt, Cu, Ag, Au, lanthanoids (Ln), and actinoids) high-nuclearity clusters, including metal-oxo/hydroxide/chalcogenide clusters and metal clusters (with metal-metal binding) protected by surface organic ligands, such as thiolate, phosphine, alkynyl, carbonyl and nitrogen/oxygen donor ligands. Furthermore, we present the symmetrical beauty of metal cluster structures and the geometrical similarity of different types of clusters and provide a large number of examples to show how to accurately describe the metal clusters from the perspective of highly symmetrical polyhedra. Finally, knowledge and further insights into the design and synthesis of unknown metal clusters are put forward by summarizing these "star" molecules.
7 citations
TL;DR: The first phosphorus(V)-substituted titanium-oxo cluster was reported in 1992 and many studies have been published on the syntheses, properties, and applications of these clusters as mentioned in this paper.
Abstract: Phosphorus(V)-substituted titanium-oxo clusters are composed of titanoxane (Ti–O–Ti), phosphatitanoxane (Ti–O–P), and organic/inorganic groups, such as pentamethylcyclopentadienyl, alkoxyl, carboxylate, acetylacetonate, hydroxyl, and chloride. The first phosphorus(V)-substituted titanium-oxo cluster was reported in 1992. To date, many studies have been published on the syntheses, properties, and applications of these clusters. However, no review has been reported yet. In this study, these clusters are divided into four categories: (i) the syntheses, properties, and proposed formation mechanism of titanium phosphonate clusters, (ii) the syntheses of carboxylate-substituted titanium phosphonate clusters, (iii) the syntheses and properties of titanium phosphinate- and phosphate-clusters, and (iv) the advanced investigation of phosphorus(V)-substituted titanium-oxo clusters.
5 citations
References
More filters
TL;DR: This work automates routine small-molecule structure determination starting from single-crystal reflection data, the Laue group and a reasonable guess as to which elements might be present.
Abstract: The new computer program SHELXT employs a novel dual-space algorithm to solve the phase problem for single-crystal reflection data expanded to the space group P1. Missing data are taken into account and the resolution extended if necessary. All space groups in the specified Laue group are tested to find which are consistent with the P1 phases. After applying the resulting origin shifts and space-group symmetry, the solutions are subject to further dual-space recycling followed by a peak search and summation of the electron density around each peak. Elements are assigned to give the best fit to the integrated peak densities and if necessary additional elements are considered. An isotropic refinement is followed for non-centrosymmetric space groups by the calculation of a Flack parameter and, if appropriate, inversion of the structure. The structure is assembled to maximize its connectivity and centred optimally in the unit cell. SHELXT has already solved many thousand structures with a high success rate, and is optimized for multiprocessor computers. It is, however, unsuitable for severely disordered and twinned structures because it is based on the assumption that the structure consists of atoms.
17,039 citations
TL;DR: The synthesis, structure, and magnetism of a tetranuclear dysprosium(III) SMM that exhibits the largest relaxation barrier seen for any polynuclear SMM to date is reported.
Abstract: Single-molecule magnets (SMMs) continue to be an attractive research field because of their unique and intriguing properties and potential applications in high-density data storage technologies and molecular spintronics. The anisotropic barrier (U) of an SMM is derived from a combination of an appreciable spin ground state (S) and uniaxial Ising-like magneto-anisotropy (D). The magnet-like behavior can be observed by slow relaxation of the magnetization below the blocking temperature. Since the discovery of SMMs in the early 1990s, this assumption has formed the basis for the understanding of the origin of the anisotropic barrier. However, in recent years the development of novel lanthanide-only SMMs that challenge and defy this theory pose a number of questions: How can slow relaxation of the magnetization be observed in a nonmagnetic state complex? Why are large energy barriers seen for mononuclear lanthanide(III) complexes? To answer such important questions, it is vital to investigate novel SMMs with high magnetoanisotropy for which the influence of the large negative D value could result in higher anisotropic barriers. Clearly lanthanide-based polynuclear systems are an important avenue to explore in the pursuit of SMMs with higher anisotropic barriers, because of the strong spin–orbit coupling commonly observed in 4f systems. However, lanthanide-only SMMs are rare. The majority of reported SMMs have been prepared with transition-metal ions, although the recent application of a mixed transition-metal/ lanthanide strategy also yielded many structurally and magnetically interesting systems. The scarcity of lanthanide-only SMMs results from the difficulty in promoting magnetic interactions between the lanthanide ions. The interactions can, however, be enhanced by overlapping bridging ligand orbitals. In addition, fast quantum tunneling of the magnetization (QTM), which is common for lanthanide systems, generally prevents the isolation of SMMs with high anisotropic energy barriers. Our recent work suggests that dysprosium(III) ions may hold the key to obtaining high-blocking-temperature lanthanide-only SMMs. When an appropriate ligand system is employed, it is possible to exploit the large intrinsic magnetoanisotropy, high spin, and reduced QTM that dysprosium(III) ions offer. Recently, we have focused our attention towards the synthesis of dysprosium(III) cluster complexes with 1,2bis(2-hydroxy-3-methoxybenzylidene) hydrazone (H2bmh) and 3-methoxysalicylaldehyde hydrazone (Hmsh) as chelating agents (see Figure S1 in the Supporting Information). This strategy has proven to be successful and has led to a polynuclear lanthanide SMM with a record anisotropic barrier. Herein, we report the synthesis, structure, and magnetism of a tetranuclear dysprosium(III) SMM that exhibits the largest relaxation barrier seen for any polynuclear SMM to date. A suspension of DyCl3·6H2O and o-vanillin (2:1 ratio) in DMF/CH2Cl2 (1:5 ratio) was treated with 4 equivalents of Et3N. The solution was stirred for 1 minute, and then 4 equivalents of N2H4·H2O was added. The resulting yellow solution yielded rectangular, orange-yellow crystals of the tetranuclear complex [Dy4(m3-OH)2(bmh)2(msh)4Cl2] (1) in 19.1% yield after 2 days. The msh and bmh ligands were formed in situ by the reaction of o-vanillin and hydrazine. The slight excess of hydrazine is essential for the formation of both ligands; when an excess of o-vanillin was used instead, no product was isolated. The basic conditions promote the deprotonation of the ligands and the formation of bridging hydroxide anions. Single-crystal X-ray analysis revealed the centrosymmetric complex 1 (Figure 1), which has a defect-dicubane central core. The four coplanar Dy ions are bridged by two m3-OH ligands displaced above and below (0.922 ) the Dy4 plane with Dy O bond lengths of 2.362(6), 2.302(6), and 2.447(6) andDy O Dy angles of 106.5(2), 107.7(2), and 105.7(2)8, and also by a combination of four phenoxide oxygen atoms [Dy O 2.312(2), 2.298(6), 2.448(6), 2.345(6) ] and two diaza bridging groups [Dy N 2.508(8), 2.564(8) ]. Close inspection of the packing arrangement reveals stacking of the [*] P.-H. Lin, Dr. T. J. Burchell, Dr. M. Murugesu Chemistry Department, University of Ottawa and Centre for Catalysis Research and Innovation D’Iorio Hall, 10 Marie Curie, Ottawa, ON, K1N6N5 (Canada) Fax: (+1)613-562-5170 E-mail: m.murugesu@uottawa.ca Homepage: http://www.science.uottawa.ca/~mmuruges/
549 citations
TL;DR: Two triazine ligands have been synthesized by derivatisation of cyanuric chloride: 6-(diethylamino)-2,4-disulfide group present on one ring and a co-ordinated thiolate on the second.
Abstract: Two ligands have been synthesized by derivatisation of cyanuric chloride: 6-(diethylamino)-2,4-disulfanyl-1,3,5-triazine (H2SSta) 1 and 6-(diethylamino)-2-hydroxo-4-sulfanyl-1,3,5-triazine (H2OSta) 2 have been characterised by X-ray crystallography, which shows intermolecular hydrogen bonding in the solid state, leading to dimers of 1 and ribbons of 2. On reaction with metal salts both ligands undergo oligomerisation reactions. Compound 1 reacts with nickel chloride to form a mononuclear complex, [Ni{(Sta)S(S2ta)}] 3. In 3 two triazine ligands have reacted, to form a tetradentate ligand in which two triazine rings are bridged by a sulfur group, with a co-ordinated disulfide group present on one ring and a co-ordinated thiolate on the second. Compound 2 reacts with cobalt(II) chloride to form a cage complex, [Co6NaO(OStaH)7{S(Ota)2}2(O2CPh)2(H2O)2] 4. This complicated structure contains two polydentate ligands formed by linking triazine groups through a bridging sulfur. The cage contains four cobalt(II) and two cobalt(III) sites which are assigned by bond length considerations. The compound [Co(OSta)3] 5 co-crystallises with 4, and its structure has also been determined.
495 citations
01 Jan 2009
TL;DR: The magnet-like behavior can be observed by slow relaxation of the magnetization below the blocking temperature as mentioned in this paper, and this assumption has formed the basis for the understanding of the origin of the anisotropic barrier.
Abstract: The magnet-like behavior can beobserved by slow relaxation of the magnetization below theblocking temperature. Since the discovery of SMMs in theearly 1990s, this assumption has formed the basis for theunderstanding of the origin of the anisotropic barrier.However, in recent years the development of novel lantha-nide-only SMMs that challenge and defy this theory pose anumber of questions:
495 citations
TL;DR: In this article, a review of the potential of bismuth-containing heterometallic oxides is presented together with feasible applications of the latter, and a variety of structurally related high-nuclearity molecular Bismuth oxo clusters are discussed that serve as model compounds.
274 citations