scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Black Phosphorus Revisited: A Missing Metal-Free Elemental Photocatalyst for Visible Light Hydrogen Evolution.

01 May 2017-Advanced Materials (Adv Mater)-Vol. 29, Iss: 17, pp 1605776
TL;DR: For the first time, the visible light photocatalytic H2 evolution of BP nanosheets prepared via a facile solid-state mechanochemical method by ball-milling bulk BP is reported.
Abstract: Metal-free elemental photocatalysts for hydrogen (H2 ) evolution are more advantageous than the traditional metal-based inorganic photocatalysts since the nonmetal elements are generally cheaper, more earth-abundant, and environmentally friendly. Black phosphorus (BP) has been attracting increasing attention in recent years based on its anisotropic 2D layered structure with tunable bandgap in the range of 0.3-2.0 eV; however, the application of BP for photocatalytic H2 evolution has been scarcely reported experimentally although being theoretically predicted. Herein, for the first time, the visible light photocatalytic H2 evolution of BP nanosheets prepared via a facile solid-state mechanochemical method by ball-milling bulk BP is reported. Without using any noble metal cocatalyst, the visible light photocatalytic hydrogen evolution rate of BP nanosheets reaches 512 µmol h-1 g-1 , which is ≈18 times higher than that of the bulk BP, and is comparable or even higher than that of graphitic carbon nitrides (g-C3 N4 ).
Citations
More filters
Journal ArticleDOI
TL;DR: Various cocatalysts, such as the biomimetic, metal-based,Metal-free, and multifunctional ones, and their selectivity for CO2 photoreduction are summarized and discussed, along with the recent advances in this area.
Abstract: Photoreduction of CO2 into sustainable and green solar fuels is generally believed to be an appealing solution to simultaneously overcome both environmental problems and energy crisis. The low selectivity of challenging multi-electron CO2 photoreduction reactions makes it one of the holy grails in heterogeneous photocatalysis. This Review highlights the important roles of cocatalysts in selective photocatalytic CO2 reduction into solar fuels using semiconductor catalysts. A special emphasis in this review is placed on the key role, design considerations and modification strategies of cocatalysts for CO2 photoreduction. Various cocatalysts, such as the biomimetic, metal-based, metal-free, and multifunctional ones, and their selectivity for CO2 photoreduction are summarized and discussed, along with the recent advances in this area. This Review provides useful information for the design of highly selective cocatalysts for photo(electro)reduction and electroreduction of CO2 and complements the existing reviews on various semiconductor photocatalysts.

1,365 citations

Journal ArticleDOI
TL;DR: Owing to the interfacial interaction between BP and CN, efficient charge transfer occurred, thereby enhancing the photocatalytic performance, and the present results show that BP/CN is a metal-free photocatalyst for artificial photosynthesis and renewable energy conversion.
Abstract: In the drive toward green and sustainable chemistry, exploring efficient and stable metal-free photocatalysts with broadband solar absorption from the UV to near-infrared region for the photoreduction of water to H2 remains a big challenge. To this end, a binary nanohybrid (BP/CN) of two-dimensional (2D) black phosphorus (BP) and graphitic carbon nitride (CN) was designed and used as a metal-free photocatalyst for the first time. During irradiation of BP/CN in water with >420 and >780 nm light, solid H2 gas was generated, respectively. Owing to the interfacial interaction between BP and CN, efficient charge transfer occurred, thereby enhancing the photocatalytic performance. The efficient charge-trapping and transfer processes were thoroughly investigated with time-resolved diffuse reflectance spectroscopic measurement. The present results show that BP/CN is a metal-free photocatalyst for artificial photosynthesis and renewable energy conversion.

857 citations

Journal ArticleDOI
TL;DR: This work reports a new metal-free phosphorene/g-C3 N4 photocatalyst and sheds lights on the design and fabrication of 2D/2D VDW heterojunction for applications in catalysis, electronics, and optoelectronics.
Abstract: The generation of green hydrogen (H2 ) energy using sunlight is of great significance to solve the worldwide energy and environmental issues. Particularly, photocatalytic H2 production is a highly promising strategy for solar-to-H2 conversion. Recently, various heterostructured photocatalysts with high efficiency and good stability have been fabricated. Among them, 2D/2D van der Waals (VDW) heterojunctions have received tremendous attention, since this architecture can promote the interfacial charge separation and transfer and provide massive reactive centers. On the other hand, currently, most photocatalysts are composed of metal elements with high cost, limited reserves, and hazardous environmental impact. Hence, the development of metal-free photocatalysts is desirable. Here, a novel 2D/2D VDW heterostructure of metal-free phosphorene/graphitic carbon nitride (g-C3 N4 ) is fabricated. The phosphorene/g-C3 N4 nanocomposite shows an enhanced visible-light photocatalytic H2 production activity of 571 µmol h-1 g-1 in 18 v% lactic acid aqueous solution. This improved performance arises from the intimate electronic coupling at the 2D/2D interface, corroborated by the advanced characterizations techniques, e.g., synchrotron-based X-ray absorption near-edge structure, and theoretical calculations. This work not only reports a new metal-free phosphorene/g-C3 N4 photocatalyst but also sheds lights on the design and fabrication of 2D/2D VDW heterojunction for applications in catalysis, electronics, and optoelectronics.

683 citations

Journal ArticleDOI
TL;DR: The relationship between hollow nanostructures and their photocatalytic performance are discussed and some insights into the key challenges and perspectives are also discussed, with a good hope to shed light on further promoting the rapid progress of this dynamic research field.
Abstract: Photocatalysis for solar-driven reactions promises a bright future in addressing energy and environmental challenges. The performance of photocatalysis is highly dependent on the design of photocatalysts, which can be rationally tailored to achieve efficient light harvesting, promoted charge separation and transport, and accelerated surface reactions. Due to its unique feature, semiconductors with hollow structure offer many advantages in photocatalyst design including improved light scattering and harvesting, reduced distance for charge migration and directed charge separation, and abundant surface reactive sites of the shells. Herein, the relationship between hollow nanostructures and their photocatalytic performance are discussed. The advantages of hollow nanostructures are summarized as: 1) enhancement in the light harvesting through light scattering and slow photon effects; 2) suppression of charge recombination by reducing charge transfer distance and directing separation of charge carriers; and 3) acceleration of the surface reactions by increasing accessible surface areas for separating the redox reactions spatially. Toward the end of the review, some insights into the key challenges and perspectives of hollow structured photocatalysts are also discussed, with a good hope to shed light on further promoting the rapid progress of this dynamic research field.

484 citations

Journal ArticleDOI
TL;DR: A new artificial Z-scheme photocatalytic system has been designed herein based on the two-dimensional (2D) heterostructure of black phosphorus (BP)/bismuth vanadate (BiVO4) based on an effective charge separation makes possible the reduction and oxidation of water on BP and BiVO4, respectively.
Abstract: Spontaneously solar-driven water splitting to produce H2 and O2 , that is, the conversion of solar energy to chemical energy is a dream of mankind. However, it is difficult to make overall water splitting feasible without using any sacrificial agents and external bias. Drawing inspiration from nature, a new artificial Z-scheme photocatalytic system has been designed herein based on the two-dimensional (2D) heterostructure of black phosphorus (BP)/bismuth vanadate (BiVO4 ). An effective charge separation makes possible the reduction and oxidation of water on BP and BiVO4 , respectively. The optimum H2 and O2 production rates on BP/BiVO4 were approximately 160 and 102 μmol g-1 h-1 under irradiation of light with a wavelength longer than 420 nm, without using any sacrificial agents or external bias.

442 citations

References
More filters
Journal ArticleDOI
07 Jul 1972-Nature
TL;DR: Water photolysis is investigated by exploiting the fact that water is transparent to visible light and cannot be decomposed directly, but only by radiation with wavelengths shorter than 190 nm.
Abstract: ALTHOUGH the possibility of water photolysis has been investigated by many workers, a useful method has only now been developed. Because water is transparent to visible light it cannot be decomposed directly, but only by radiation with wavelengths shorter than 190 nm (ref. 1).

27,819 citations

Journal ArticleDOI
TL;DR: It is shown that an abundant material, polymeric carbon nitride, can produce hydrogen from water under visible-light irradiation in the presence of a sacrificial donor.
Abstract: The production of hydrogen from water using a catalyst and solar energy is an ideal future energy source, independent of fossil reserves. For an economical use of water and solar energy, catalysts that are sufficiently efficient, stable, inexpensive and capable of harvesting light are required. Here, we show that an abundant material, polymeric carbon nitride, can produce hydrogen from water under visible-light irradiation in the presence of a sacrificial donor. Contrary to other conducting polymer semiconductors, carbon nitride is chemically and thermally stable and does not rely on complicated device manufacturing. The results represent an important first step towards photosynthesis in general where artificial conjugated polymer semiconductors can be used as energy transducers.

9,751 citations

Journal ArticleDOI
TL;DR: In this article, a few-layer black phosphorus crystals with thickness down to a few nanometres are used to construct field effect transistors for nanoelectronic devices. But the performance of these materials is limited.
Abstract: Two-dimensional crystals have emerged as a class of materials that may impact future electronic technologies. Experimentally identifying and characterizing new functional two-dimensional materials is challenging, but also potentially rewarding. Here, we fabricate field-effect transistors based on few-layer black phosphorus crystals with thickness down to a few nanometres. Reliable transistor performance is achieved at room temperature in samples thinner than 7.5 nm, with drain current modulation on the order of 10(5) and well-developed current saturation in the I-V characteristics. The charge-carrier mobility is found to be thickness-dependent, with the highest values up to ∼ 1,000 cm(2) V(-1) s(-1) obtained for a thickness of ∼ 10 nm. Our results demonstrate the potential of black phosphorus thin crystals as a new two-dimensional material for applications in nanoelectronic devices.

6,924 citations

Journal ArticleDOI
Jingsi Qiao1, Xianghua Kong1, Zhixin Hu1, Feng Yang1, Wei Ji1 
TL;DR: A detailed theoretical investigation of the atomic and electronic structure of few-layer black phosphorus (BP) is presented to predict its electrical and optical properties, finding that the mobilities are hole-dominated, rather high and highly anisotropic.
Abstract: Two-dimensional crystals are emerging materials for nanoelectronics. Development of the field requires candidate systems with both a high carrier mobility and, in contrast to graphene, a sufficiently large electronic bandgap. Here we present a detailed theoretical investigation of the atomic and electronic structure of few-layer black phosphorus (BP) to predict its electrical and optical properties. This system has a direct bandgap, tunable from 1.51 eV for a monolayer to 0.59 eV for a five-layer sample. We predict that the mobilities are hole-dominated, rather high and highly anisotropic. The monolayer is exceptional in having an extremely high hole mobility (of order 10,000 cm(2) V(-1) s(-1)) and anomalous elastic properties which reverse the anisotropy. Light absorption spectra indicate linear dichroism between perpendicular in-plane directions, which allows optical determination of the crystalline orientation and optical activation of the anisotropic transport properties. These results make few-layer BP a promising candidate for future electronics.

3,622 citations

Journal ArticleDOI
TL;DR: This introductory review covers the fundamental aspects of photocatalytic and photoelectrochemical water splitting and recent advances in the water splitting reaction under visible light will be presented with a focus on non-oxide semiconductor materials to give an overview of the various problems and solutions.
Abstract: Photocatalytic and photoelectrochemical water splitting under irradiation by sunlight has received much attention for production of renewable hydrogen from water on a large scale. Many challenges still remain in improving energy conversion efficiency, such as utilizing longer-wavelength photons for hydrogen production, enhancing the reaction efficiency at any given wavelength, and increasing the lifetime of the semiconductor materials. This introductory review covers the fundamental aspects of photocatalytic and photoelectrochemical water splitting. Controlling the semiconducting properties of photocatalysts and photoelectrode materials is the primary concern in developing materials for solar water splitting, because they determine how much photoexcitation occurs in a semiconductor under solar illumination and how many photoexcited carriers reach the surface where water splitting takes place. Given a specific semiconductor material, surface modifications are important not only to activate the semiconductor for water splitting but also to facilitate charge separation and to upgrade the stability of the material under photoexcitation. In addition, reducing resistance loss and forming p-n junction have a significant impact on the efficiency of photoelectrochemical water splitting. Correct evaluation of the photocatalytic and photoelectrochemical activity for water splitting is becoming more important in enabling an accurate comparison of a number of studies based on different systems. In the latter part, recent advances in the water splitting reaction under visible light will be presented with a focus on non-oxide semiconductor materials to give an overview of the various problems and solutions.

3,470 citations