scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Carbon Nanotubes--the Route Toward Applications

02 Aug 2002-Science (American Association for the Advancement of Science)-Vol. 297, Iss: 5582, pp 787-792
TL;DR: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects.
Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.
Citations
More filters
Journal ArticleDOI
TL;DR: The resistance of TNBC to conventional therapeutic agents has helped in the advancement of advanced TNBC therapeutic approaches including hyperthermia, photodynamic therapy, as well as nanomedicine-based targeted therapeutics of drugs, miRNA, siRNA, and aptamers, which will also be discussed.
Abstract: Triple-negative breast cancer (TNBC) cells are deficient in estrogen, progesterone and ERBB2 receptor expression, presenting a particularly challenging therapeutic target due to their highly invasive nature and relatively low response to therapeutics. There is an absence of specific treatment strategies for this tumor subgroup, and hence TNBC is managed with conventional therapeutics, often leading to systemic relapse. In terms of histology and transcription profile these cancers have similarities to BRCA-1-linked breast cancers, and it is hypothesized that BRCA1 pathway is non-functional in this type of breast cancer. In this review article, we discuss the different receptors expressed by TNBC as well as the diversity of different signaling pathways targeted by TNBC therapeutics, for example, Notch, Hedgehog, Wnt/b-Catenin as well as TGF-beta signaling pathways. Additionally, many epidermal growth factor receptor (EGFR), poly (ADP-ribose) polymerase (PARP) and mammalian target of rapamycin (mTOR) inhibitors effectively inhibit the TNBCs, but they face challenges of either resistance to drugs or relapse. The resistance of TNBC to conventional therapeutic agents has helped in the advancement of advanced TNBC therapeutic approaches including hyperthermia, photodynamic therapy, as well as nanomedicine-based targeted therapeutics of drugs, miRNA, siRNA, and aptamers, which will also be discussed. Artificial intelligence is another tool that is presented to enhance the diagnosis of TNBC.

145 citations


Cites background from "Carbon Nanotubes--the Route Toward ..."

  • ...Some examples of these delivery vehicles include micelles [154], luminescent carbon nanodots [155], nanodiamonds (NDs) [156], carbon nanotubes (CNTs) [157,158], Au-nano matryoshkas [159] as well as SPIONs (superparamagnetic iron oxide nanoparticles (NPs)) [160,161] etc....

    [...]

Journal ArticleDOI
TL;DR: In this article, the performance of enzymatic biosensors based on the immobilization of different enzymes within a carbon nanotubes paste electrode (CNTPE) prepared by dispersion of multi-wall carbon nanotsubes (MWNT) and mineral oil is reported.
Abstract: The performance of enzymatic biosensors based on the immobilization of different enzymes within a carbon nanotubes paste electrode (CNTPE) prepared by dispersion of multi-wall carbon nanotubes (MWNT) and mineral oil is reported in this work. The strong electrocatalytic activity of carbon nanotubes towards the reduction of hydrogen peroxide and quinones and the oxidation of NADH have allowed an effective low-potential amperometric determination of lactate, phenols, catechols and ethanol, in connection with the incorporation of lactate oxidase, polyphenol oxidase and alcohol dehydrogenase/NAD+, respectively, within the composite matrix. Compared to the analogous enzymatic CPEs, a great enhancement in the response is observed at the enzymatic CNTPEs. Therefore, highly sensitive lactate, phenols, catechols and alcohols biosensors without using any metal or redox mediator can be obtained with this new composite material.

145 citations

Journal ArticleDOI
TL;DR: In this paper, the state-of-the-art of carbon nanomaterial-enabled electrochemical sensors in nitrite detection in the past years (2014-2018) is presented.
Abstract: Nitrite is widely found in the natural environment and human life, but the abuse and potential toxicity of nitrite poses a great threat to human health. Therefore, it is necessary to develop effective, robust, and reliable methods for nitrite detection. Carbon nanomaterials have shown their great potential in the development of high-performance electrochemical sensors in view of their numerous fascinating properties. Carbon nanomaterial-enabled electrochemical sensors have been regarded as one of the most promising detection tools for nitrite due to their high sensitivity, simplicity of operation, and excellent selectivity. In this review, we introduce the state-of-art of carbon nanomaterial-enabled electrochemical sensors in nitrite detection in the past years (2014–2018). The properties and advantages of carbon nanotubes, graphene, graphene oxide, carbon nanofibers, carbon nanodots, nanodiamonds, and nanoporous carbon in the development of nitrite sensors are discussed in details. Furthermore, the challenges and prospects for the application of carbon nanomaterial-enabled electrochemical sensors for nitrite analysis are also included.

145 citations

Journal ArticleDOI
TL;DR: The morphological, electrical resistivity (ER), and electromagnetic interference (EMI) shielding effectiveness (SE) properties of poly(propylene) (PP), polystyrene (PS), PP/PS, and PP/ PS/ styrene-butadiene-styrene blends filled with 10 vol.-% high structure carbon black were studied.
Abstract: The morphological, electrical resistivity (ER), and electromagnetic interference (EMI) shielding effectiveness (SE) properties of poly(propylene) (PP), polystyrene (PS), PP/PS, and PP/PS/ styrene-butadiene-styrene (SBS) blends filled with 10 vol.-% high structure carbon black (CB) were studied. For the CB/PP/PS blends, TEM and SEM observations indicated that CB is preferentially localized in the PS phase. ER and EMI SE of the CB/PP/PS and CB/PP/PS/SBS blends were bounded between those of the PS composite (lower bound) and the PP composite (upper bound). In the PP/PS volume ratio ranging from (75/25) to (25/75), ER and EMI SE of the CB-filled blends were independent of the PP/PS volume ratio. The EMI SE obtained by the 2 mm thick plates made of 10 vol.-% CB-filled (100/0)-(10/90) PP/PS blends are adequate for computers shielding applications.

145 citations

Journal ArticleDOI
16 Jun 2010-ACS Nano
TL;DR: With overall electrical and optical performance comparable to ITO and exceptional mechanical properties, the described coatings can provide an excellent alternative toITO or other nanowire- and nanotube-based TC specifically in flexible electronics, displays, and sensors.
Abstract: New transparent conductors (TCs) capable of replacing traditional indium tin oxide (ITO) are much needed for displays, sensors, solar cells, smart energy-saving windows, and flexible electronics. Technical requirements of TCs include not only high electrical conductivity and transparency but also environmental stability and mechanical property which are often overlooked in the research environment. Single-walled carbon nanotube (SWNT) coatings have been suggested as alternative TC materials but typically lack sufficient wear resistance compared to ITO. Balancing conductance, transparency, durability, and flexibility is a formidable challenge, which leads us to the introduction of a new TC figure of merit, ΠTC, incorporating all these qualities. Maximization of ΠTC to that of ITO or better can be suggested as an initial research goal. Fine tuning of SWNT layer-by-layer (LBL) polymeric nanocomposite structures makes possible integration of all the necessary properties. The produced TC demonstrated resistivi...

144 citations

References
More filters
Journal ArticleDOI
28 Jan 2000-Science
TL;DR: The nanotubes sensors exhibit a fast response and a substantially higher sensitivity than that of existing solid-state sensors at room temperature and the mechanisms of molecular sensing with nanotube molecular wires are investigated.
Abstract: Chemical sensors based on individual single-walled carbon nanotubes (SWNTs) are demonstrated. Upon exposure to gaseous molecules such as NO 2 or NH 3 , the electrical resistance of a semiconducting SWNT is found to dramatically increase or decrease. This serves as the basis for nanotube molecular sensors. The nanotube sensors exhibit a fast response and a substantially higher sensitivity than that of existing solid-state sensors at room temperature. Sensor reversibility is achieved by slow recovery under ambient conditions or by heating to high temperatures. The interactions between molecular species and SWNTs and the mechanisms of molecular sensing with nanotube molecular wires are investigated.

5,908 citations

Journal ArticleDOI
01 May 1998-Nature
TL;DR: In this paper, the fabrication of a three-terminal switching device at the level of a single molecule represents an important step towards molecular electronics and has attracted much interest, particularly because it could lead to new miniaturization strategies in the electronics and computer industry.
Abstract: The use of individual molecules as functional electronic devices was first proposed in the 1970s (ref 1) Since then, molecular electronics2,3 has attracted much interest, particularly because it could lead to conceptually new miniaturization strategies in the electronics and computer industry The realization of single-molecule devices has remained challenging, largely owing to difficulties in achieving electrical contact to individual molecules Recent advances in nanotechnology, however, have resulted in electrical measurements on single molecules4,5,6,7 Here we report the fabrication of a field-effect transistor—a three-terminal switching device—that consists of one semiconducting8,9,10 single-wall carbon nanotube11,12 connected to two metal electrodes By applying a voltage to a gate electrode, the nanotube can be switched from a conducting to an insulating state We have previously reported5 similar behaviour for a metallic single-wall carbon nanotube operated at extremely low temperatures The present device, in contrast, operates at room temperature, thereby meeting an important requirement for potential practical applications Electrical measurements on the nanotube transistor indicate that its operation characteristics can be qualitatively described by the semiclassical band-bending models currently used for traditional semiconductor devices The fabrication of the three-terminal switching device at the level of a single molecule represents an important step towards molecular electronics

5,258 citations

Journal ArticleDOI
26 Jul 1996-Science
TL;DR: X-ray diffraction and electron microscopy showed that fullerene single-wall nanotubes (SWNTs) are nearly uniform in diameter and that they self-organize into “ropes,” which consist of 100 to 500 SWNTs in a two-dimensional triangular lattice with a lattice constant of 17 angstroms.
Abstract: The major part of this chapter has already appeared in [1], but because of the length restrictions (in Science), the discussion on why we think this form is given in only brief detail. This chapter goes into more depth to try to answer the questions of why the fullerenes form themselves. This is another example of the very special behavior of carbon. From a chemist’s standpoint, it is carbon’s ability to form multiple bonds that allows it to make these low dimensional forms rather than to produce tetrahedral forms. Carbon can readily accomplish this and it is in the mathematics and physics of the way this universe was put together, that carbon is given this property. One of the consequences of this property is that, if left to its own devices as carbon condenses from the vapor and if the temperature range is just right, above 1000°C, but lower than 1400°C, there is an efficient self-assembly process whose endpoint is C60.

5,215 citations

Journal ArticleDOI
26 Sep 1997-Science
TL;DR: In this paper, the Young's modulus, strength, and toughness of nanostructures are evaluated using an atomic force microscopy (AFM) approach. And the results showed that the strength of the SiC NRs were substantially greater than those found previously for larger SiC structures, and they approach theoretical values.
Abstract: The Young's modulus, strength, and toughness of nanostructures are important to proposed applications ranging from nanocomposites to probe microscopy, yet there is little direct knowledge of these key mechanical properties. Atomic force microscopy was used to determine the mechanical properties of individual, structurally isolated silicon carbide (SiC) nanorods (NRs) and multiwall carbon nanotubes (MWNTs) that were pinned at one end to molybdenum disulfide surfaces. The bending force was measured versus displacement along the unpinned lengths. The MWNTs were about two times as stiff as the SiC NRs. Continued bending of the SiC NRs ultimately led to fracture, whereas the MWNTs exhibited an interesting elastic buckling process. The strengths of the SiC NRs were substantially greater than those found previously for larger SiC structures, and they approach theoretical values. Because of buckling, the ultimate strengths of the stiffer MWNTs were less than those of the SiC NRs, although the MWNTs represent a uniquely tough, energy-absorbing material.

4,627 citations

Journal ArticleDOI
TL;DR: The thermal conductivity and thermoelectric power of a single carbon nanotube were measured using a microfabricated suspended device and shows linear temperature dependence with a value of 80 microV/K at room temperature.
Abstract: The thermal conductivity and thermoelectric power of a single carbon nanotube were measured using a microfabricated suspended device. The observed thermal conductivity is more than 3000 W/K m at room temperature, which is 2 orders of magnitude higher than the estimation from previous experiments that used macroscopic mat samples. The temperature dependence of the thermal conductivity of nanotubes exhibits a peak at 320 K due to the onset of umklapp phonon scattering. The measured thermoelectric power shows linear temperature dependence with a value of 80 microV/K at room temperature.

3,166 citations