scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Carbon Nanotubes--the Route Toward Applications

02 Aug 2002-Science (American Association for the Advancement of Science)-Vol. 297, Iss: 5582, pp 787-792
TL;DR: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects.
Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.
Citations
More filters
Journal ArticleDOI
TL;DR: In this article, a large quantity of nanosized ZnO tubular structures was prepared using a very simple thermal evaporation of mixed Zn-ZnO powders under a wet oxidation condition.
Abstract: A large quantity of nanosized ZnO tubular structures was prepared using a very simple thermal evaporation of mixed Zn–ZnO powders under a wet oxidation condition. The ZnO nanotubes have a hollow core with crystalline wall of 8–20 nm in thickness. Optical properties of ZnO nanotubes were studied at room temperature. Raman peaks arising from the ZnO nanotubes were analyzed, which correspond well to that of the bulk ZnO sample. The photoluminescence measurements of ZnO nanotubes revealed an intensive UV peak at 377 nm corresponding to the free exciton emission, and a broad peak at about 500 nm arising from defect-related emission.

604 citations

Journal ArticleDOI
TL;DR: In this article, the authors classify the nanostructures into (1) nanoparticles, which offer large surface area to photo-electrode film for dye-adsorption, (2) core-shell structures, which are derived from the nanoparticles however with a consideration to reduce charge recombination by forming a coating layer, (3) one-dimensional nanstructures such as nanowires and nanotubes, which provide direct pathways for electron transport much faster than in the nanoparticle films, and (4) three-dimensional nanoparticles such as Nan

603 citations

Journal ArticleDOI
TL;DR: In this paper, a review of recent achievements in the multilevel interior-structured hollow 0D and 1D micro/nanomaterials is presented and categorized, which includes a macroporous structure, a core-in-hollow-shell, a multishell structure, and a multichamber structure.
Abstract: In this Review, recent achievements in the multilevel interior-structured hollow 0D and 1D micro/nanomaterials are presented and categorized. The 0D multilevel interior-structured micro/nanomaterials are classified into four main interior structural categories that include a macroporous structure, a core-in-hollow-shell structure, a multishell structure, and a multichamber structure. Correspondingly, 1D tubular micro/nanomaterials are of four analogous structures, which are a segmented structure, a wire-in-tube structure, a multiwalled structure, and a multichannel structure. Because of the small sizes and complex interior structures, some special synthetic strategies that are different from routine hollowing methods, are proposed to produce these interior structures. Compared with the same-sized solid or common hollow counterparts, these fantastic multilevel hollow-structured micro/nanomaterials show a good wealth of outstanding properties that enable them broad applications in catalysis, sensors, Li-ion batteries, microreactors, biomedicines, and many others.

599 citations

Journal ArticleDOI
Hao Zhang, Gaoping Cao1, Zhiyong Wang1, Yusheng Yang1, Zujin Shi1, Zhennan Gu1 
TL;DR: This binder-free manganese oxide/CNTA electrode presents excellent rate capability, high capacitance, and long cycle life, with strong promise for high-rate electrochemical capacitive energy storage applications.
Abstract: Manganese oxide nanoflower/carbon nanotube array (CNTA) composite electrodes with hierarchical porous structure, large surface area, and superior conductivity was controllable prepared by combining electrodeposition technique and a vertically aligned CNTA framework. This binder-free manganese oxide/CNTA electrode presents excellent rate capability (50.8% capacity retention at 77 A/g), high capacitance (199 F/g and 305 F/cm3), and long cycle life (3% capacity loss after 20 000 charge/discharge cycles), with strong promise for high-rate electrochemical capacitive energy storage applications.

595 citations

Journal ArticleDOI
TL;DR: In this article, the synthesis methods employed for the doping of different types of carbon materials with various elements and the characterization techniques used to investigate their physicochemical properties such as degree of graphitization, dopant content and surface area are reviewed.
Abstract: Carbon materials such as graphite, graphene, carbon nanotubes and ordered mesoporous carbon have attracted a lot of attention for their use in fuel cells, due to beneficial properties like high conductivity, high mechanical and chemical stability and, for the latter, high surface area. Doping these materials with nitrogen or, less commonly, other elements alters their (electronic) properties, making them particularly suitable for application as electrocatalysts for the oxygen reduction reaction (ORR) in a fuel cell. This paper reviews the synthesis methods employed for the doping of these different types of carbon materials with various elements and the characterization techniques used to investigate their physicochemical properties such as degree of graphitization, dopant content, dopant configuration and surface area. Furthermore, their application as electrocatalysts for the oxygen reduction in a fuel cell is reviewed. Finally, the possible mechanisms for the ORR on N-doped carbon materials are critically discussed and compared to the mechanisms of commercial Pt/C electrocatalysts.

594 citations

References
More filters
Journal ArticleDOI
28 Jan 2000-Science
TL;DR: The nanotubes sensors exhibit a fast response and a substantially higher sensitivity than that of existing solid-state sensors at room temperature and the mechanisms of molecular sensing with nanotube molecular wires are investigated.
Abstract: Chemical sensors based on individual single-walled carbon nanotubes (SWNTs) are demonstrated. Upon exposure to gaseous molecules such as NO 2 or NH 3 , the electrical resistance of a semiconducting SWNT is found to dramatically increase or decrease. This serves as the basis for nanotube molecular sensors. The nanotube sensors exhibit a fast response and a substantially higher sensitivity than that of existing solid-state sensors at room temperature. Sensor reversibility is achieved by slow recovery under ambient conditions or by heating to high temperatures. The interactions between molecular species and SWNTs and the mechanisms of molecular sensing with nanotube molecular wires are investigated.

5,908 citations

Journal ArticleDOI
01 May 1998-Nature
TL;DR: In this paper, the fabrication of a three-terminal switching device at the level of a single molecule represents an important step towards molecular electronics and has attracted much interest, particularly because it could lead to new miniaturization strategies in the electronics and computer industry.
Abstract: The use of individual molecules as functional electronic devices was first proposed in the 1970s (ref 1) Since then, molecular electronics2,3 has attracted much interest, particularly because it could lead to conceptually new miniaturization strategies in the electronics and computer industry The realization of single-molecule devices has remained challenging, largely owing to difficulties in achieving electrical contact to individual molecules Recent advances in nanotechnology, however, have resulted in electrical measurements on single molecules4,5,6,7 Here we report the fabrication of a field-effect transistor—a three-terminal switching device—that consists of one semiconducting8,9,10 single-wall carbon nanotube11,12 connected to two metal electrodes By applying a voltage to a gate electrode, the nanotube can be switched from a conducting to an insulating state We have previously reported5 similar behaviour for a metallic single-wall carbon nanotube operated at extremely low temperatures The present device, in contrast, operates at room temperature, thereby meeting an important requirement for potential practical applications Electrical measurements on the nanotube transistor indicate that its operation characteristics can be qualitatively described by the semiclassical band-bending models currently used for traditional semiconductor devices The fabrication of the three-terminal switching device at the level of a single molecule represents an important step towards molecular electronics

5,258 citations

Journal ArticleDOI
26 Jul 1996-Science
TL;DR: X-ray diffraction and electron microscopy showed that fullerene single-wall nanotubes (SWNTs) are nearly uniform in diameter and that they self-organize into “ropes,” which consist of 100 to 500 SWNTs in a two-dimensional triangular lattice with a lattice constant of 17 angstroms.
Abstract: The major part of this chapter has already appeared in [1], but because of the length restrictions (in Science), the discussion on why we think this form is given in only brief detail. This chapter goes into more depth to try to answer the questions of why the fullerenes form themselves. This is another example of the very special behavior of carbon. From a chemist’s standpoint, it is carbon’s ability to form multiple bonds that allows it to make these low dimensional forms rather than to produce tetrahedral forms. Carbon can readily accomplish this and it is in the mathematics and physics of the way this universe was put together, that carbon is given this property. One of the consequences of this property is that, if left to its own devices as carbon condenses from the vapor and if the temperature range is just right, above 1000°C, but lower than 1400°C, there is an efficient self-assembly process whose endpoint is C60.

5,215 citations

Journal ArticleDOI
26 Sep 1997-Science
TL;DR: In this paper, the Young's modulus, strength, and toughness of nanostructures are evaluated using an atomic force microscopy (AFM) approach. And the results showed that the strength of the SiC NRs were substantially greater than those found previously for larger SiC structures, and they approach theoretical values.
Abstract: The Young's modulus, strength, and toughness of nanostructures are important to proposed applications ranging from nanocomposites to probe microscopy, yet there is little direct knowledge of these key mechanical properties. Atomic force microscopy was used to determine the mechanical properties of individual, structurally isolated silicon carbide (SiC) nanorods (NRs) and multiwall carbon nanotubes (MWNTs) that were pinned at one end to molybdenum disulfide surfaces. The bending force was measured versus displacement along the unpinned lengths. The MWNTs were about two times as stiff as the SiC NRs. Continued bending of the SiC NRs ultimately led to fracture, whereas the MWNTs exhibited an interesting elastic buckling process. The strengths of the SiC NRs were substantially greater than those found previously for larger SiC structures, and they approach theoretical values. Because of buckling, the ultimate strengths of the stiffer MWNTs were less than those of the SiC NRs, although the MWNTs represent a uniquely tough, energy-absorbing material.

4,627 citations

Journal ArticleDOI
TL;DR: The thermal conductivity and thermoelectric power of a single carbon nanotube were measured using a microfabricated suspended device and shows linear temperature dependence with a value of 80 microV/K at room temperature.
Abstract: The thermal conductivity and thermoelectric power of a single carbon nanotube were measured using a microfabricated suspended device. The observed thermal conductivity is more than 3000 W/K m at room temperature, which is 2 orders of magnitude higher than the estimation from previous experiments that used macroscopic mat samples. The temperature dependence of the thermal conductivity of nanotubes exhibits a peak at 320 K due to the onset of umklapp phonon scattering. The measured thermoelectric power shows linear temperature dependence with a value of 80 microV/K at room temperature.

3,166 citations