Carbon Nanotubes--the Route Toward Applications
02 Aug 2002-Science (American Association for the Advancement of Science)-Vol. 297, Iss: 5582, pp 787-792
TL;DR: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects.
Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.
Citations
More filters
TL;DR: This review article mainly describes the preparation, structure, property and application of the two families of composite materials with an emphasis on the difference between them.
Abstract: The formation of composite materials represents an efficient route to improve the performances of polymers and expand their application scopes. Due to the unique structure and remarkable mechanical, electrical, thermal, optical and catalytic properties, carbon nanotube and graphene have been mostly studied as a second phase to produce high performance polymer composites. Although carbon nanotube and graphene share some advantages in both structure and property, they are also different in many aspects including synthesis of composite material, control in composite structure and interaction with polymer molecule. The resulting composite materials are distinguished in property to meet different applications. This review article mainly describes the preparation, structure, property and application of the two families of composite materials with an emphasis on the difference between them. Some general and effective strategies are summarized for the development of polymer composite materials based on carbon nanotube and graphene.
388 citations
TL;DR: A review of available published literature in which nanostructures are incorporated into AM printing media as an attempt to improve the properties of the final printed part is provided in this paper.
Abstract: Purpose – This paper aims to provide a review of available published literature in which nanostructures are incorporated into AM printing media as an attempt to improve the properties of the final printed part. The purpose of this article is to summarize the research done to date, to highlight successes in the field, and to identify opportunities that the union of AM and nanotechnology could bring to science and technology.Design/methodology/approach – Research in which metal, ceramic, and carbon nanomaterials have been incorporated into AM technologies such as stereolithography, laser sintering, fused filament fabrication, and three‐dimensional printing is presented. The results of the addition of nanomaterials into these AM processes are reviewed.Findings – The addition of nanostructured materials into the printing media for additive manufacturing affects significantly the properties of the final parts. Challenges in the application of nanomaterials to additive manufacturing are nevertheless numerous.Re...
384 citations
TL;DR: The recent advances and current status of enhancing the photocatalytic activity and anti-photocorrosion of semiconductor ZnO by coupling with versatile carbon materials, e.g., C60, carbon nanotube, graphene and other carbon materials are described.
Abstract: Coupling ZnO with carbon materials using a suitable integration method to form ZnO-carbon composites has been established as a promising strategy to ameliorate the photocatalytic performance of semiconductor ZnO. In this perspective article, we describe the recent advances and current status of enhancing the photocatalytic activity and anti-photocorrosion of semiconductor ZnO by coupling with versatile carbon materials, e.g., C60, carbon nanotube, graphene and other carbon materials. The primary roles of carbon materials in boosting the photoactivity and photostability of ZnO have been outlined and illustrated with some selected typical examples. In particular, the three main kinds of mechanisms with regard to anti-photocorrosion of ZnO by coupling with carbon have been demonstrated. Finally, we give a concise perspective on this important research area and specifically propose further research opportunities in optimizing the photocatalytic performance of ZnO-carbon composites and widening the scope of their potential photocatalytic applications.
382 citations
TL;DR: Exposure to both nano-C60 and C60HxC70Hx suspensions caused hopping frequency and appendage movement to increase, indicating that certain nanoparticle types may have impacts on population and food web dynamics in aquatic systems.
Abstract: Little is known about the impact manufactured nanoparticles will have on aquatic organisms. Previously, we demonstrated that toxicity differs with nanoparticle type and preparation and observed behavioral changes upon exposure to the more lethal nanoparticle suspensions. In this experiment, we quantified these behavioral and physiological responses of Daphnia magna at sublethal nanoparticle concentrations. Titanium dioxide (TiO2) and fullerenes (nano-C60) were chosen for their potential use in technology. Other studies suggest that addition of functional groups to particles can affect their toxicity to cell cultures, but it is unknown if the same is true at the whole organism level. Therefore, a fullerene derivative, C60HxC70Hx, was also used to examine how functional groups affect Daphnia response. Using a high-speed camera, we quantified several behavior and physiological parameters including hopping frequency, feeding appendage and postabdominal curling movement, and heart rate. Nano-C60 was the only s...
381 citations
TL;DR: In this article, a method for reducing graphite oxide using a variety of commercially available alcohols is described, and the carbon products were found to exhibit high C :O ratios (up to 30 ǫ:O ratio, as determined by elemental combustion analysis), high conductivities, and good specific capacitances when tested as electrode materials in ultracapacitors.
Abstract: A method for reducing graphite oxide using a variety of commercially available alcohols is described. The carbon products were found to exhibit high C : O ratios (up to 30 : 1, as determined by elemental combustion analysis), high conductivities (up to 4600 S m−1), and good specific capacitances (up to 35 F g−1) when tested as electrode materials in ultracapacitors.
380 citations
References
More filters
TL;DR: The nanotubes sensors exhibit a fast response and a substantially higher sensitivity than that of existing solid-state sensors at room temperature and the mechanisms of molecular sensing with nanotube molecular wires are investigated.
Abstract: Chemical sensors based on individual single-walled carbon nanotubes (SWNTs) are demonstrated. Upon exposure to gaseous molecules such as NO 2 or NH 3 , the electrical resistance of a semiconducting SWNT is found to dramatically increase or decrease. This serves as the basis for nanotube molecular sensors. The nanotube sensors exhibit a fast response and a substantially higher sensitivity than that of existing solid-state sensors at room temperature. Sensor reversibility is achieved by slow recovery under ambient conditions or by heating to high temperatures. The interactions between molecular species and SWNTs and the mechanisms of molecular sensing with nanotube molecular wires are investigated.
5,908 citations
TL;DR: In this paper, the fabrication of a three-terminal switching device at the level of a single molecule represents an important step towards molecular electronics and has attracted much interest, particularly because it could lead to new miniaturization strategies in the electronics and computer industry.
Abstract: The use of individual molecules as functional electronic devices was first proposed in the 1970s (ref 1) Since then, molecular electronics2,3 has attracted much interest, particularly because it could lead to conceptually new miniaturization strategies in the electronics and computer industry The realization of single-molecule devices has remained challenging, largely owing to difficulties in achieving electrical contact to individual molecules Recent advances in nanotechnology, however, have resulted in electrical measurements on single molecules4,5,6,7 Here we report the fabrication of a field-effect transistor—a three-terminal switching device—that consists of one semiconducting8,9,10 single-wall carbon nanotube11,12 connected to two metal electrodes By applying a voltage to a gate electrode, the nanotube can be switched from a conducting to an insulating state We have previously reported5 similar behaviour for a metallic single-wall carbon nanotube operated at extremely low temperatures The present device, in contrast, operates at room temperature, thereby meeting an important requirement for potential practical applications Electrical measurements on the nanotube transistor indicate that its operation characteristics can be qualitatively described by the semiclassical band-bending models currently used for traditional semiconductor devices The fabrication of the three-terminal switching device at the level of a single molecule represents an important step towards molecular electronics
5,258 citations
TL;DR: X-ray diffraction and electron microscopy showed that fullerene single-wall nanotubes (SWNTs) are nearly uniform in diameter and that they self-organize into “ropes,” which consist of 100 to 500 SWNTs in a two-dimensional triangular lattice with a lattice constant of 17 angstroms.
Abstract: The major part of this chapter has already appeared in [1], but because of the length restrictions (in Science), the discussion on why we think this form is given in only brief detail. This chapter goes into more depth to try to answer the questions of why the fullerenes form themselves. This is another example of the very special behavior of carbon. From a chemist’s standpoint, it is carbon’s ability to form multiple bonds that allows it to make these low dimensional forms rather than to produce tetrahedral forms. Carbon can readily accomplish this and it is in the mathematics and physics of the way this universe was put together, that carbon is given this property. One of the consequences of this property is that, if left to its own devices as carbon condenses from the vapor and if the temperature range is just right, above 1000°C, but lower than 1400°C, there is an efficient self-assembly process whose endpoint is C60.
5,215 citations
TL;DR: In this paper, the Young's modulus, strength, and toughness of nanostructures are evaluated using an atomic force microscopy (AFM) approach. And the results showed that the strength of the SiC NRs were substantially greater than those found previously for larger SiC structures, and they approach theoretical values.
Abstract: The Young's modulus, strength, and toughness of nanostructures are important to proposed applications ranging from nanocomposites to probe microscopy, yet there is little direct knowledge of these key mechanical properties. Atomic force microscopy was used to determine the mechanical properties of individual, structurally isolated silicon carbide (SiC) nanorods (NRs) and multiwall carbon nanotubes (MWNTs) that were pinned at one end to molybdenum disulfide surfaces. The bending force was measured versus displacement along the unpinned lengths. The MWNTs were about two times as stiff as the SiC NRs. Continued bending of the SiC NRs ultimately led to fracture, whereas the MWNTs exhibited an interesting elastic buckling process. The strengths of the SiC NRs were substantially greater than those found previously for larger SiC structures, and they approach theoretical values. Because of buckling, the ultimate strengths of the stiffer MWNTs were less than those of the SiC NRs, although the MWNTs represent a uniquely tough, energy-absorbing material.
4,627 citations
TL;DR: The thermal conductivity and thermoelectric power of a single carbon nanotube were measured using a microfabricated suspended device and shows linear temperature dependence with a value of 80 microV/K at room temperature.
Abstract: The thermal conductivity and thermoelectric power of a single carbon nanotube were measured using a microfabricated suspended device. The observed thermal conductivity is more than 3000 W/K m at room temperature, which is 2 orders of magnitude higher than the estimation from previous experiments that used macroscopic mat samples. The temperature dependence of the thermal conductivity of nanotubes exhibits a peak at 320 K due to the onset of umklapp phonon scattering. The measured thermoelectric power shows linear temperature dependence with a value of 80 microV/K at room temperature.
3,166 citations