scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Carbon Nanotubes--the Route Toward Applications

02 Aug 2002-Science (American Association for the Advancement of Science)-Vol. 297, Iss: 5582, pp 787-792
TL;DR: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects.
Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.
Citations
More filters
Journal ArticleDOI
TL;DR: In this article, the authors present concepts and demonstrators of nano electromechanical sensors based on carbon nanotubes (CNTs), and demonstrate suspended SWNT-based cantilever structures and a membrane-based nanotube pressure sensor.
Abstract: Sensors are key components in an overwhelming wealth of systems for industrial and consumer applications. Further system miniaturization will demand for continuous down-scaling of sensor functions in such systems most likely towards nanoscale. Then new sensor device concepts will emerge to improve performance, e.g. sensitivity, or to utilize unique functional properties of nanoscale structures. This paper presents concepts and demonstrators of nano electromechanical sensors based on carbon nanotubes (CNTs). First, different transducer concepts based on the unique electrical, mechanical and electromechanical properties of single-walled carbon nanotubes (SWNTs) are addressed and discussed. Second, fabrication techniques and methods for the integration of SWNTs in micro or nanosystems are presented. Finally, demonstrators of suspended SWNT-based cantilever structures and a membrane-based nanotube pressure sensor are introduced and evaluated. Electromechanical measurements on these test devices prove SWNTs as exceptional piezoresistive electromechanical transducers with gauge factors far above the values of state-of-the-art strain gauges.

268 citations

Journal ArticleDOI
TL;DR: A detailed overview of the present status of carbon nanotube-polyaniline (CNT/PANI) composites, from processing to structural and property evaluations, can be found in this paper.

267 citations

Journal ArticleDOI
TL;DR: These techniques may be divided into ‘liquid’ methods, where CNTs are dispersed into a liquid and solutionspun into fibers, and ‘solid” methods,where CNTS are directly spun into ropes or yarns, which yield fibers whose properties are not sufficiently close to optimal.

267 citations

Journal ArticleDOI
TL;DR: In this article, the electrical, mechanical, and electromechanical properties of carbon nanotubes (CNTs) have been investigated for nanoelectromechanical sensors.
Abstract: Carbon nanotubes (CNTs) have shown great promise as sensing elements in nanoelectromechanical sensors. In this review paper, we discuss the electrical, mechanical, and electromechanical properties of CNTs that are used in such applications. This investigation indicates which nanotube properties should be carefully considered when designing nanotube-based sensors. We then present the primary techniques that have been used for the integration of nanotubes into devices and proceed to give a description of sensors that have been developed using CNTs as active sensing elements

265 citations

Journal ArticleDOI
TL;DR: The catalytic activity of Pt@ MOF-177 towards the solvent- and base-free room temperature oxidation of alcohols in air has been tested and shows Pt@MOF- 177 to be an efficient catalyst in the oxidation ofcohols.
Abstract: The gas-phase loading of [Zn(4)O(btb)(2)](8) (MOF-177; H(3)btb=1,3,5-benzenetribenzoic acid) with the volatile platinum precursor [Me(3)PtCp'] (Cp'=methylcyclopentadienyl) was confirmed by solid state (13)C magic angle spinning (MAS)-NMR spectroscopy. Subsequent reduction of the inclusion compound [Me(3)PtCp'](4)@MOF-177 by hydrogen at 100 bar and 100 degrees C for 24 h was carried out and gave rise to the formation of platinum nanoparticles in a size regime of 2-5 nm embedded in the unchanged MOF-177 host lattice as confirmed by transmission electron microscopy (TEM) micrographs and powder X-ray diffraction (PXRD). The room-temperature hydrogen adsorption of Pt@MOF-177 has been followed in a gravimetric fashion (magnetic suspension balance) and shows almost 2.5 wt % in the first cycle, but is decreased down to 0.5 wt % in consecutive cycles. The catalytic activity of Pt@MOF-177 towards the solvent- and base-free room temperature oxidation of alcohols in air has been tested and shows Pt@MOF-177 to be an efficient catalyst in the oxidation of alcohols.

265 citations

References
More filters
Journal ArticleDOI
28 Jan 2000-Science
TL;DR: The nanotubes sensors exhibit a fast response and a substantially higher sensitivity than that of existing solid-state sensors at room temperature and the mechanisms of molecular sensing with nanotube molecular wires are investigated.
Abstract: Chemical sensors based on individual single-walled carbon nanotubes (SWNTs) are demonstrated. Upon exposure to gaseous molecules such as NO 2 or NH 3 , the electrical resistance of a semiconducting SWNT is found to dramatically increase or decrease. This serves as the basis for nanotube molecular sensors. The nanotube sensors exhibit a fast response and a substantially higher sensitivity than that of existing solid-state sensors at room temperature. Sensor reversibility is achieved by slow recovery under ambient conditions or by heating to high temperatures. The interactions between molecular species and SWNTs and the mechanisms of molecular sensing with nanotube molecular wires are investigated.

5,908 citations

Journal ArticleDOI
01 May 1998-Nature
TL;DR: In this paper, the fabrication of a three-terminal switching device at the level of a single molecule represents an important step towards molecular electronics and has attracted much interest, particularly because it could lead to new miniaturization strategies in the electronics and computer industry.
Abstract: The use of individual molecules as functional electronic devices was first proposed in the 1970s (ref 1) Since then, molecular electronics2,3 has attracted much interest, particularly because it could lead to conceptually new miniaturization strategies in the electronics and computer industry The realization of single-molecule devices has remained challenging, largely owing to difficulties in achieving electrical contact to individual molecules Recent advances in nanotechnology, however, have resulted in electrical measurements on single molecules4,5,6,7 Here we report the fabrication of a field-effect transistor—a three-terminal switching device—that consists of one semiconducting8,9,10 single-wall carbon nanotube11,12 connected to two metal electrodes By applying a voltage to a gate electrode, the nanotube can be switched from a conducting to an insulating state We have previously reported5 similar behaviour for a metallic single-wall carbon nanotube operated at extremely low temperatures The present device, in contrast, operates at room temperature, thereby meeting an important requirement for potential practical applications Electrical measurements on the nanotube transistor indicate that its operation characteristics can be qualitatively described by the semiclassical band-bending models currently used for traditional semiconductor devices The fabrication of the three-terminal switching device at the level of a single molecule represents an important step towards molecular electronics

5,258 citations

Journal ArticleDOI
26 Jul 1996-Science
TL;DR: X-ray diffraction and electron microscopy showed that fullerene single-wall nanotubes (SWNTs) are nearly uniform in diameter and that they self-organize into “ropes,” which consist of 100 to 500 SWNTs in a two-dimensional triangular lattice with a lattice constant of 17 angstroms.
Abstract: The major part of this chapter has already appeared in [1], but because of the length restrictions (in Science), the discussion on why we think this form is given in only brief detail. This chapter goes into more depth to try to answer the questions of why the fullerenes form themselves. This is another example of the very special behavior of carbon. From a chemist’s standpoint, it is carbon’s ability to form multiple bonds that allows it to make these low dimensional forms rather than to produce tetrahedral forms. Carbon can readily accomplish this and it is in the mathematics and physics of the way this universe was put together, that carbon is given this property. One of the consequences of this property is that, if left to its own devices as carbon condenses from the vapor and if the temperature range is just right, above 1000°C, but lower than 1400°C, there is an efficient self-assembly process whose endpoint is C60.

5,215 citations

Journal ArticleDOI
26 Sep 1997-Science
TL;DR: In this paper, the Young's modulus, strength, and toughness of nanostructures are evaluated using an atomic force microscopy (AFM) approach. And the results showed that the strength of the SiC NRs were substantially greater than those found previously for larger SiC structures, and they approach theoretical values.
Abstract: The Young's modulus, strength, and toughness of nanostructures are important to proposed applications ranging from nanocomposites to probe microscopy, yet there is little direct knowledge of these key mechanical properties. Atomic force microscopy was used to determine the mechanical properties of individual, structurally isolated silicon carbide (SiC) nanorods (NRs) and multiwall carbon nanotubes (MWNTs) that were pinned at one end to molybdenum disulfide surfaces. The bending force was measured versus displacement along the unpinned lengths. The MWNTs were about two times as stiff as the SiC NRs. Continued bending of the SiC NRs ultimately led to fracture, whereas the MWNTs exhibited an interesting elastic buckling process. The strengths of the SiC NRs were substantially greater than those found previously for larger SiC structures, and they approach theoretical values. Because of buckling, the ultimate strengths of the stiffer MWNTs were less than those of the SiC NRs, although the MWNTs represent a uniquely tough, energy-absorbing material.

4,627 citations

Journal ArticleDOI
TL;DR: The thermal conductivity and thermoelectric power of a single carbon nanotube were measured using a microfabricated suspended device and shows linear temperature dependence with a value of 80 microV/K at room temperature.
Abstract: The thermal conductivity and thermoelectric power of a single carbon nanotube were measured using a microfabricated suspended device. The observed thermal conductivity is more than 3000 W/K m at room temperature, which is 2 orders of magnitude higher than the estimation from previous experiments that used macroscopic mat samples. The temperature dependence of the thermal conductivity of nanotubes exhibits a peak at 320 K due to the onset of umklapp phonon scattering. The measured thermoelectric power shows linear temperature dependence with a value of 80 microV/K at room temperature.

3,166 citations