Comprehensive Review of Distributed FACTS Control Algorithms for Power Quality Enhancement in Utility Grid With Renewable Energy Penetration
TL;DR: A comprehensive review of various conventional and adaptive algorithms used to control DFACTS devices for improvement of power quality in utility grids with RE penetration is presented.
Abstract: Rapid industrialization and its automation on the globe demands increased generation of electrical energy with more reliability and quality. Renewable energy (RE) sources are considered as a green form of energy and extensively used as an alternative source of energy for conventional energy sources to meet the increased demand for electrical power. However, these sources, when integrated to the utility grid, pose challenges in maintaining the power quality (PQ) and stability of the power system network. This is due to the unpredictable and variable nature of generation by these sources. The distributed flexible AC transmission system (DFACTS) devices such as distributed static compensator (DSTATCOM) and dynamic voltage restorer (DVR) play an active role in mitigating PQ issues associated with RE penetration. The performance of DFACTS devices is mostly dependent on the type of control algorithms employed for switching of these devices. This paper presents a comprehensive review of various conventional and adaptive algorithms used to control DFACTS devices for improvement of power quality in utility grids with RE penetration. This review intends to provide a summary of the design, experimental hardware, performance and feasibility aspects of these algorithms reported in the literature. More than 170 research publications are critically reviewed, classified, and listed for quick reference for the advantage of engineers and academician working in this area.
Citations
More filters
TL;DR: A critical review of techniques used for detection and classification PQ disturbances in the utility grid with renewable energy penetration is presented, to provide various concepts utilized for extraction of the features to detect and classify the P Q disturbances even in the noisy environment.
Abstract: The global concern with power quality is increasing due to the penetration of renewable energy (RE) sources to cater the energy demands and meet de-carbonization targets. Power quality (PQ) disturbances are found to be more predominant with RE penetration due to the variable outputs and interfacing converters. There is a need to recognize and mitigate PQ disturbances to supply clean power to the consumer. This article presents a critical review of techniques used for detection and classification PQ disturbances in the utility grid with renewable energy penetration. The broad perspective of this review paper is to provide various concepts utilized for extraction of the features to detect and classify the PQ disturbances even in the noisy environment. More than 220 research publications have been critically reviewed, classified and listed for quick reference of the engineers, scientists and academicians working in the power quality area.
104 citations
Cites background from "Comprehensive Review of Distributed..."
...These classified disturbances are later mitigated in the mitigation stage using distributed flexible AC transmission system (DFACTS) devices [37]....
[...]
TL;DR: A thorough discussion and comprehensive review of DVR topologies based on operations, power converters, control methods, and applications and the state-of-the-art in works of literature, and comparative study on power quality issues are provided.
Abstract: Power quality is a pressing concern and of the utmost importance for advanced and high-tech equipment in particular, whose performance relies heavily on the supply’s quality. Power quality issues like voltage sags/swells, harmonics, interruptions, etc. are defined as any deviations in current, voltage, or frequency that result in end-use equipment damage or failure. Sensitive loads like medical equipment in hospitals and health clinics, schools, prisons, etc. malfunction for the outages and interruptions, thereby causing substantial economic losses. For enhancing power quality, custom power devices (CPDs) are recommended, among which the Dynamic Voltage Restorer (DVR) is considered as the best and cost-effective solution. DVR is a power electronic-based solution to mitigate and compensate voltage sags. This paper provides a thorough discussion and comprehensive review of DVR topologies based on operations, power converters, control methods, and applications. The review compares the state-of-the-art in works of literature, and comparative study on power quality issues, the DVR principle along with its operation modes, the DVR components, the DVR topologies based on energy storage, the DVR topologies based on single-/three-phase power converters, and the DVR topologies based on control units that have different control processing stages. Furthermore, modified and improved configurations of the DVR, as well as its integration with distributed generations, are described. This work serves as a comprehensive and useful reference for those who have an interest in researching DVRs.
58 citations
TL;DR: A critical one-stop handbook related to one hundred and four methods in six categories covering all kinds of networks and tailored applications for ESS selection, evaluation criteria, modelling and solution methods is provided.
Abstract: Energy storage system (ESS) has been expected to be a viable solution which can provide diverse benefits to different power system stakeholders, including generation side, transmission network (TN), distribution network (DN) and off-grid microgrid. Prudent ESS allocation in power grids determines satisfactory performance of ESS applications. Optimal sizing and placement of ESS are crucial for power quality improvement of DN and transmission system protection setting. To solve this issue, considerable researches have been done either in modelling or algorithms. However, various options and complex characteristics in different sub-systems make it difficult to appraise a specific method for an ESS application, while the existing reviews only focus on ESS applications in DN. This paper provides a critical one-stop handbook related to one hundred and four methods in six categories covering all kinds of networks and tailored applications. Meanwhile, a systematic methodology is presented with an extensive latest literature review, including ESS selection, evaluation criteria, modelling and solution methods. Particularly, different technical requirements and modelling methods of different sub-systems are outlined. Besides, pros and cons of optimization methods are thoroughly analysed and compared to reveal state-of-the-art studies. Finally, key points in optimal ESS sizing and placement are concluded along with recommendations for future research.
52 citations
TL;DR: In this article, the authors compare and relate prior and latest developments on PQ and stability challenges and their solutions and highlight the recommendations and future trends for PQ improvement are highlighted at the end.
Abstract: Recently, the penetration of renewable energy sources (RESs) into electrical power systems is witnessing a large attention due to their inexhaustibility, environmental benefits, storage capabilities, lower maintenance and stronger economy, etc. Among these RESs, offshore wind power plants (OWPP) are ones of the most widespread power plants that have emerged with regard to being competitive with other energy technologies. However, the application of power electronic converters (PECs), offshore transmission lines and large substation transformers result in considerable power quality (PQ) issues in grid connected OWPP. Moreover, due to the installation of filters for each OWPP, some other challenges such as voltage and frequency stability arise. In this regard, various customs power devices along with integration control methodologies have been implemented to deal with stated issues. Furthermore, for a smooth and reliable operation of the system, each country established various grid codes. Although various mitigation schemes and related standards for OWPP are documented separately, a comprehensive review covering these aspects has not yet addressed in the literature. The objective of this study is to compare and relate prior as well as latest developments on PQ and stability challenges and their solutions. Low voltage ride through (LVRT) schemes and associated grid codes prevalent for the interconnection of OWPP based power grid have been deliberated. In addition, various PQ issues and mitigation options such as FACTS based filters, DFIG based adaptive and conventional control algorithms, ESS based methods and LVRT requirements have been summarized and compared. Finally, recommendations and future trends for PQ improvement are highlighted at the end.
34 citations
TL;DR: In this paper, the authors proposed a nonlinear adaptive backstepping control technique applied to a DFIG based wind system and an optimization technique that uses the rooted tree optimization (RTO) algorithm.
Abstract: With the development of wind power generation in recent years, several studies have dealt with the active and reactive power control of wind power systems, along with the quality of energy produced and the connection to distribution networks. In this context, this research proposes a new contribution to the field. The major objective of this work is the development of a nonlinear adaptive backstepping control technique applied to a DFIG based wind system and an optimization technique that uses the rooted tree optimization (RTO) algorithm. The backstepping control strategy is based on the Lyapunov nonlinear technique to guarantee the stability of the system. It is applied to the two converters (i.e., machine and network sides) and subsequently improved with estimators to make the proposed system robust to parametric variation. The RTO technique is based on monitoring the behavior of the underlying foundation of trees in search of underground water in accordance with the level of underground control. The solution proposed for the control is validated using two methods: (1) a simulation on MATLAB/Simulink to test the continuation of the reference (real wind speed) and the robustness of the system and (2) a real-time implementation on a dSPACE-DS1104 board connected to an experimental bench in a laboratory. Simulation and experimental results highlight the validation of the proposed model with better performance compared with other control techniques, such as sliding mode control, direct power control, and field-oriented control.
32 citations
References
More filters
01 Aug 1976
TL;DR: It is shown that for stationary inputs the LMS adaptive algorithm, based on the method of steepest descent, approaches the theoretical limit of efficiency in terms of misadjustment and speed of adaptation when the eigenvalues of the input correlation matrix are equal or close in value.
Abstract: This paper describes the performance characteristics of the LMS adaptive filter, a digital filter composed of a tapped delay line and adjustable weights, whose impulse response is controlled by an adaptive algorithm. For stationary stochastic inputs, the mean-square error, the difference between the filter output and an externally supplied input called the "desired response," is a quadratic function of the weights, a paraboloid with a single fixed minimum point that can be sought by gradient techniques. The gradient estimation process is shown to introduce noise into the weight vector that is proportional to the speed of adaptation and number of weights. The effect of this noise is expressed in terms of a dimensionless quantity "misadjustment" that is a measure of the deviation from optimal Wiener performance. Analysis of a simple nonstationary case, in which the minimum point of the error surface is moving according to an assumed first-order Markov process, shows that an additional contribution to misadjustment arises from "lag" of the adaptive process in tracking the moving minimum point. This contribution, which is additive, is proportional to the number of weights but inversely proportional to the speed of adaptation. The sum of the misadjustments can be minimized by choosing the speed of adaptation to make equal the two contributions. It is further shown, in Appendix A, that for stationary inputs the LMS adaptive algorithm, based on the method of steepest descent, approaches the theoretical limit of efficiency in terms of misadjustment and speed of adaptation when the eigenvalues of the input correlation matrix are equal or close in value. When the eigenvalues are highly disparate (λ max /λ min > 10), an algorithm similar to LMS but based on Newton's method would approach this theoretical limit very closely.
1,423 citations
"Comprehensive Review of Distributed..." refers background in this paper
...More than 170 research publications [1-176] have been reviewed critically and presented in seven sections of this paper....
[...]
05 Dec 2005
TL;DR: This paper deals with general pure active filters for power conditioning, and specific hybridactive filters for harmonic filtering of three-phase diode rectifiers.
Abstract: Unlike traditional passive harmonic filters, modern active harmonic filters have the following multiple functions: harmonic filtering, damping,isolation and termination, reactive-power control for power factor correction and voltage regulation, load balancing, voltage-flicker reduction, and/or their combinations. Significant cost reductions in both power semiconductor devices and signal processing devices have inspired manufactures to put active filters on the market. This paper deals with general pure active filters for power conditioning, and specific hybrid active filters for harmonic filtering of three-phase diode rectifiers.
954 citations
"Comprehensive Review of Distributed..." refers background in this paper
...More than 170 research publications [1-176] have been reviewed critically and presented in seven sections of this paper....
[...]
TL;DR: In this paper, the authors give an overview and discuss some development trends in the technologies used for wind power systems, and several state-of-the-art wind turbine concepts, as well as the corresponding power electronic converters and control structures are reviewed, respectively.
Abstract: Wind power is still the most promising renewable energy in the year of 2013. The wind turbine system (WTS) started with a few tens of kilowatt power in the 1980s. Now, multimegawatt wind turbines are widely installed even up to 6-8 MW. There is a widespread use of wind turbines in the distribution networks and more and more wind power stations, acting as power plants, are connected directly to the transmission networks. As the grid penetration and power level of the wind turbines increase steadily, the wind power starts to have significant impacts to the power grid system. Therefore, more advanced generators, power electronic systems, and control solutions have to be introduced to improve the characteristics of the wind power plant and make it more suitable to be integrated into the power grid. Meanwhile, there are also some emerging technology challenges, which need to be further clarified and investigated. This paper gives an overview and discusses some development trends in the technologies used for wind power systems. First, the developments of technology and market are generally discussed. Next, several state-of-the-art wind turbine concepts, as well as the corresponding power electronic converters and control structures, are reviewed, respectively. Furthermore, grid requirements and the technology challenges for the future WTS are also addressed.
736 citations
"Comprehensive Review of Distributed..." refers background in this paper
...INTRODUCTION The increased demand for electrical power, the requirement of environmental conservation and depletion of fossil fuel reserves have forced the utilities to increase the penetration level of RE into the utility grid [1], [2]....
[...]
...More than 170 research publications [1-176] have been reviewed critically and presented in seven sections of this paper....
[...]
01 Apr 1975
TL;DR: A least-mean-square (LMS) adaptive algorithm for complex signals is derived where the boldfaced terms represent complex (phasor) signals and the bar above Xj designates complex conjugate.
Abstract: A least-mean-square (LMS) adaptive algorithm for complex signals is derived. The original Widrow-Hoff LMS algorithm is W j+l = W j + 2µejX j . The complex form is shown to be W j+1 = W j + 2µejX- j , where the boldfaced terms represent complex (phasor) signals and the bar above X j designates complex conjugate.
693 citations
"Comprehensive Review of Distributed..." refers background or methods in this paper
...More than 170 research publications [1-176] have been reviewed critically and presented in seven sections of this paper....
[...]
...These algorithms include Adaline, ALMS, and ARLS based algorithms [29]–[34]....
[...]