scispace - formally typeset
Journal ArticleDOI

Control of a Single-Phase Cascaded H-Bridge Multilevel Inverter for Grid-Connected Photovoltaic Systems

Reads0
Chats0
TLDR
This paper presents a single-phase cascaded H-bridge converter for a grid-connected photovoltaic (PV) application that offers other advantages such as the operation at lower switching frequency or lower current ripple compared to standard two-level topologies.
Abstract
This paper presents a single-phase cascaded H-bridge converter for a grid-connected photovoltaic (PV) application The multilevel topology consists of several H-bridge cells connected in series, each one connected to a string of PV modules The adopted control scheme permits the independent control of each dc-link voltage, enabling, in this way, the tracking of the maximum power point for each string of PV panels Additionally, low-ripple sinusoidal-current waveforms are generated with almost unity power factor The topology offers other advantages such as the operation at lower switching frequency or lower current ripple compared to standard two-level topologies Simulation and experimental results are presented for different operating conditions

read more

Citations
More filters
Journal ArticleDOI

Recent Advances and Industrial Applications of Multilevel Converters

TL;DR: This paper first presents a brief overview of well-established multilevel converters strongly oriented to their current state in industrial applications to then center the discussion on the new converters that have made their way into the industry.
Journal ArticleDOI

Medium-Voltage Multilevel Converters—State of the Art, Challenges, and Requirements in Industrial Applications

TL;DR: An inverter configuration based on three-level building blocks to generate five-level voltage waveforms is suggested and it is shown that such an inverter may be operated at a very low switching frequency to achieve minimum on-state and dynamic device losses for highly efficient MV drive applications while maintaining low harmonic distortion.
Journal ArticleDOI

Multidimensional Modulation Technique for Cascaded Multilevel Converters

TL;DR: A simple and low-computational-cost modulation technique for multilevel cascaded H-bridge converters based on geometrical considerations considering a unidimensional control region to determine the switching sequence and the corresponding switching times is presented.
Journal ArticleDOI

Multilevel Inverter Topologies With Reduced Device Count: A Review

TL;DR: In this article, some of the recently proposed multilevel inverter topologies with reduced power switch count are reviewed and analyzed, both in terms of the qualitative and quantitative parameters.
Journal ArticleDOI

Topology Review and Derivation Methodology of Single-Phase Transformerless Photovoltaic Inverters for Leakage Current Suppression

TL;DR: The generation mechanism of leakage current is investigated and the concepts of dc-based and ac-based decoupling networks are proposed to not only cover the published symmetrical inductor-based topologies but also offer an innovative strategy to derive advanced inverters.
References
More filters
Journal ArticleDOI

Multilevel inverters: a survey of topologies, controls, and applications

TL;DR: The most important topologies like diode-clamped inverter (neutral-point clamped), capacitor-Clamped (flying capacitor), and cascaded multicell with separate DC sources are presented and the circuit topology options are presented.
Journal ArticleDOI

A review of single-phase grid-connected inverters for photovoltaic modules

TL;DR: In this article, the authors focus on inverter technologies for connecting photovoltaic (PV) modules to a single-phase grid and categorize the inverters into four classifications: 1) the number of power processing stages in cascade; 2) the type of power decoupling between the PV module(s) and the single phase grid; 3) whether they utilizes a transformer (either line or high frequency) or not; and 4) the kind of grid-connected power stage.
Journal ArticleDOI

Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives

TL;DR: This paper covers the high-power voltage-source inverter and the most used multilevel-inverter topologies, including the neutral-point-clamped, cascaded H-bridge, and flying-capacitor converters.
Book

Control System Design

TL;DR: A key aspect of the book is the frequent use of real world design examples drawn directly from the authors' industrial experience, represented by over 15 substantial case studies ranging from distillation columns to satellite tracking.
Journal ArticleDOI

Development of a photovoltaic array model for use in power-electronics simulation studies

TL;DR: In this article, the authors present a circuit-based simulation model for a PV cell in order to allow the interaction between a proposed power converter (with its associated control arrangement) and the PV array to be studied.
Related Papers (5)