Open AccessBook
Cooling techniques for electronic equipment
Reads0
Chats0
TLDR
In this article, the authors present practical guides for Natural Convection and Radiation Cooling for Electronic Components. But they do not consider the effects of thermal stresses in lead wires, Solder Joints and Plated Throughholes.Abstract:
Evaluating the Cooling Requirements. Designing the Electronic Chassis. Conduction Cooling for Chassis and Circuit Boards. Mounting and Cooling Techniques for Electronic Components. Practical Guides for Natural Convection and Radiation Cooling. Forced--Air Cooling for Electronics. Thermal Stresses in Lead Wires, Solder Joints, and Plated Throughholes. Predicting the Fatigue Life in Thermal Cycling and Vibration Environment. Transient Cooling for Electronic Systems. Special Applications for Tough Cooling Jobs. Effective Cooling for Large Racks and Cabinets. Finite Element Methods for Mathematical Modeling. Environmental Stress Screening Techniques. References. Index.read more
Citations
More filters
Patent
Housing for circuit board and power components, has deformable thermally-conductive medium arranged between circuit board and base of other half of housing
TL;DR: In this article, a deformed thermally-conductive medium (7) is arranged between the circuit board and the base of the other housing half, such as a paste.
Journal ArticleDOI
Power Electronics Component Location and Heat Sink Length Optimization - Hybrid Electrical Vehicle (HEV)
TL;DR: This paper focuses on optimizing best location of PE components with heatsink and optimizing the length of heatsink in order to reduce the overall temperature of a Hybrid Electrical Vehicle (HEV) inverter and shrink the packaging size which will lead to cost reduction in manufacturing.
Journal ArticleDOI
Numerical study on significance of wave amplitude, wavelength and aspect ratio on heat transfer and fluid flow characteristics in circular wavy MC heat sink design:
TL;DR: In this paper, the hydrothermal characteristics in a circular wavy microchannel (CWMC) design under laminar flow conditions with uniform heat flux are numerically studied.
Proceedings ArticleDOI
Thermal Resistance Model of Packaging for RF High Power Devices
TL;DR: In this article, an analytical expression for thermal resistance of packaging for high power devices is presented, where the interface thermal effect, sintering void and active area ratio are taken into account in this model.
Posted Content
Effect of Horizontal Spacing and Tilt Angle on Thermo-Buoyant Natural Convection from Two Horizontally Aligned Square Cylinders
TL;DR: In this article, a finite-volume method (FVM) approach was used to quantify the heat transfer from two horizontally aligned square cylinders, and the results were represented in terms of temperature contours and streamlines, velocity and temperature profiles, mass flow rate in the passage between the cylinders, local and average Nu and the drag coefficient.