Coupled Cluster Studies of Ionization Potentials and Electron Affinities of Single-Walled Carbon Nanotubes
03 Feb 2017-Journal of Physical Chemistry A (American Chemical Society)-Vol. 121, Iss: 6, pp 1328-1335
TL;DR: It is demonstrated that the electronegativity of C20nH20 systems remains, to a large extent, independent of the nanotube length.
Abstract: In this paper, we apply equation-of-motion coupled cluster (EOM-CC) methods in the studies of the vertical ionization potentials (IPs) and electron affinities (EAs) for a series of single-walled carbon nanotubes (SWCNT). The EOM-CC formulations for IPs and EAs employing excitation manifolds spanned by single and double excitations (IP/EA-EOM-CCSD) are used to study the IPs and EAs of the SWCNTs as a function of the nanotube length. Several armchair nanotubes corresponding to C20nH20 models with n = 2–6 have been used in benchmark calculations. In agreement with previous studies, we demonstrate that the electronegativity of C20nH20 systems remains, to a large extent, independent of the nanotube length. We also compare IP/EA-EOM-CCSD results with those obtained with coupled cluster models with single and double excitations corrected by perturbative triples, CCSD(T), and density functional theory (DFT) using global and range-separated hybrid exchange–correlation functionals.
Citations
More filters
Pacific Northwest National Laboratory1, Lawrence Berkeley National Laboratory2, National Center for Computational Sciences3, Brookhaven National Laboratory4, Argonne National Laboratory5, Intel6, University of Texas at Arlington7, State University of New York System8, Pennsylvania State University9, Oak Ridge National Laboratory10, Washington University in St. Louis11, Wellesley College12, Maria Curie-Skłodowska University13, Iowa State University14, Academy of Sciences of the Czech Republic15, University of Tennessee at Martin16, Université libre de Bruxelles17, Facebook18, Russian Academy of Sciences19, University of Minnesota20, University of Washington21, United States Naval Research Laboratory22, Georgia Institute of Technology23, University of St Andrews24, Universidad Autónoma Metropolitana25, University of California, San Diego26, Saarland University27, Sandia National Laboratories28, University of Illinois at Urbana–Champaign29, University of Iceland30, Australian National University31, Florida Institute of Technology32, University of Science and Technology of China33, Oswaldo Cruz Foundation34, Cardiff University35, Louisiana State University36, Chinese Academy of Sciences37, National Autonomous University of Mexico38, University of Florida39, Los Alamos National Laboratory40, University of Oviedo41, Prince of Songkla University42, Ames Laboratory43, University of Utah44, Northwestern University45, Universal Display Corporation46, Federal University of Pernambuco47, CD-adapco48, Cray49, Massachusetts Institute of Technology50, Nvidia51, University of Tennessee52, Shandong Normal University53, University of Cambridge54, Advanced Micro Devices55, Technische Universität München56, Stanford University57, Wuhan University of Technology58, Stony Brook University59
TL;DR: The NWChem computational chemistry suite is reviewed, including its history, design principles, parallel tools, current capabilities, outreach, and outlook.
Abstract: Specialized computational chemistry packages have permanently reshaped the landscape of chemical and materials science by providing tools to support and guide experimental efforts and for the prediction of atomistic and electronic properties. In this regard, electronic structure packages have played a special role by using first-principle-driven methodologies to model complex chemical and materials processes. Over the past few decades, the rapid development of computing technologies and the tremendous increase in computational power have offered a unique chance to study complex transformations using sophisticated and predictive many-body techniques that describe correlated behavior of electrons in molecular and condensed phase systems at different levels of theory. In enabling these simulations, novel parallel algorithms have been able to take advantage of computational resources to address the polynomial scaling of electronic structure methods. In this paper, we briefly review the NWChem computational chemistry suite, including its history, design principles, parallel tools, current capabilities, outreach, and outlook.
342 citations
TL;DR: The NWChem computational chemistry suite as discussed by the authors provides tools to support and guide experimental efforts and for the prediction of atomistic and electronic properties by using first-principledriven methodologies to model complex chemical and materials processes.
Abstract: Specialized computational chemistry packages have permanently reshaped the landscape of chemical and materials science by providing tools to support and guide experimental efforts and for the prediction of atomistic and electronic properties. In this regard, electronic structure packages have played a special role by using first-principledriven methodologies to model complex chemical and materials processes. Over the last few decades, the rapid development of computing technologies and the tremendous increase in computational power have offered a unique chance to study complex transformations using sophisticated and predictive many-body techniques that describe correlated behavior of electrons in molecular and condensed phase systems at different levels of theory. In enabling these simulations, novel parallel algorithms have been able to take advantage of computational resources to address the polynomial scaling of electronic structure methods. In this paper, we briefly review the NWChem computational chemistry suite, including its history, design principles, parallel tools, current capabilities, outreach and outlook.
314 citations
TL;DR: This work develops a decomposition strategy to approximately represent the two-electron integral tensor in terms of low-rank vectors and can significantly reduce the storage requirement of the atomic orbital (AO) two-Electron integral Tensor with moderate decomposition thresholds.
Abstract: The representation and storage of two-electron integral tensors are vital in large-scale applications of accurate electronic structure methods. Low-rank representation and efficient storage strategy of integral tensors can significantly reduce the numerical overhead and consequently time-to-solution of these methods. In this work, by combining pivoted incomplete Cholesky decomposition (CD) with a follow-up truncated singular vector decomposition (SVD), we develop a decomposition strategy to approximately represent the two-electron integral tensor in terms of low-rank vectors. A systematic benchmark test on a series of 1-D, 2-D, and 3-D carbon–hydrogen systems demonstrates high efficiency and scalability of the compound two-step decomposition of the two-electron integral tensor in our implementation. For the size of the atomic basis set, Nb, ranging from ∼100 up to ∼2,000, the observed numerical scaling of our implementation shows O(Nb2.5−3) versus O(Nb3−4) cost of performing single CD on the two-electron ...
58 citations
TL;DR: In this article, the relationship between structural and electronic effects of finite size zigzag or armchair carbon nanotubes of various diameters and lengths, starting from a molecular template of varying shape and diameter, was investigated.
Abstract: We systematically investigate the relationships between structural and electronic effects of finite size zigzag or armchair carbon nanotubes of various diameters and lengths, starting from a molecular template of varying shape and diameter, i.e. cyclic oligoacene or oligophenacene molecules, and disclosing how adding layers and/or end-caps (i.e. hemifullerenes) can modify their (poly)radicaloid nature. We mostly used tight-binding and finite-temperature density-based methods, the former providing a simple but intuitive picture about their electronic structure, and the latter dealing effectively with strong correlation effects by relying on a fractional occupation number weighted electron density (ρFOD), with additional RAS-SF calculations backing up the latter results. We also explore how minor structural modifications of nanotube end-caps might influence the results, showing that topology, together with the chemical nature of the systems, is pivotal for the understanding of the electronic properties of these and other related systems.
21 citations
TL;DR: These EA-ADC(n)/ISR(m) schemes allow for a consistent treatment of not only electron affinities and pole strengths up to third-order of perturbation theory but also one-electron properties of electron-attached states up to second order.
Abstract: Computational schemes for comprehensive studies of molecular electron-attached states and the calculation of electron affinities (EAs) are formulated and implemented employing the intermediate state representation (ISR) formalism and the algebraic–diagrammatic construction approximation for the electron propagator (EA-ADC). These EA-ADC(n)/ISR(m) schemes allow for a consistent treatment of not only electron affinities and pole strengths up to third-order of perturbation theory (n = 3) but also one-electron properties of electron-attached states up to second order (m = 2). The EA-ADC/ISR equations were implemented in the Q-Chem program for Ŝz-adapted intermediate states, allowing also open-shell systems to be studied using unrestricted Hartree–Fock references. For benchmarking of the EA-(U)ADC/ISR schemes, EAs and dipole moments of various electron-attached states of small closed- and open-shell molecules were computed and compared to full configuration interaction data. As an illustrative example, EA-ADC(3)/ISR(2) has been applied to the thymine–thymine (6–4) DNA photolesion.
12 citations
References
More filters
NEC1
TL;DR: Iijima et al. as mentioned in this paper reported the preparation of a new type of finite carbon structure consisting of needle-like tubes, which were produced using an arc-discharge evaporation method similar to that used for fullerene synthesis.
Abstract: THE synthesis of molecular carbon structures in the form of C60 and other fullerenes1 has stimulated intense interest in the structures accessible to graphitic carbon sheets. Here I report the preparation of a new type of finite carbon structure consisting of needle-like tubes. Produced using an arc-discharge evaporation method similar to that used for fullerene synthesis, the needles grow at the negative end of the electrode used for the arc discharge. Electron microscopy reveals that each needle comprises coaxial tubes of graphitic sheets, ranging in number from 2 up to about 50. On each tube the carbon-atom hexagons are arranged in a helical fashion about the needle axis. The helical pitch varies from needle to needle and from tube to tube within a single needle. It appears that this helical structure may aid the growth process. The formation of these needles, ranging from a few to a few tens of nanometres in diameter, suggests that engineering of carbon structures should be possible on scales considerably greater than those relevant to the fullerenes. On 7 November 1991, Sumio Iijima announced in Nature the preparation of nanometre-size, needle-like tubes of carbon — now familiar as 'nanotubes'. Used in microelectronic circuitry and microscopy, and as a tool to test quantum mechanics and model biological systems, nanotubes seem to have unlimited potential.
39,086 citations
TL;DR: In this paper, a detailed study of correlation effects in the oxygen atom was conducted, and it was shown that primitive basis sets of primitive Gaussian functions effectively and efficiently describe correlation effects.
Abstract: In the past, basis sets for use in correlated molecular calculations have largely been taken from single configuration calculations. Recently, Almlof, Taylor, and co‐workers have found that basis sets of natural orbitals derived from correlated atomic calculations (ANOs) provide an excellent description of molecular correlation effects. We report here a careful study of correlation effects in the oxygen atom, establishing that compact sets of primitive Gaussian functions effectively and efficiently describe correlation effects i f the exponents of the functions are optimized in atomic correlated calculations, although the primitive (s p) functions for describing correlation effects can be taken from atomic Hartree–Fock calculations i f the appropriate primitive set is used. Test calculations on oxygen‐containing molecules indicate that these primitive basis sets describe molecular correlation effects as well as the ANO sets of Almlof and Taylor. Guided by the calculations on oxygen, basis sets for use in correlated atomic and molecular calculations were developed for all of the first row atoms from boron through neon and for hydrogen. As in the oxygen atom calculations, it was found that the incremental energy lowerings due to the addition of correlating functions fall into distinct groups. This leads to the concept of c o r r e l a t i o n c o n s i s t e n t b a s i s s e t s, i.e., sets which include all functions in a given group as well as all functions in any higher groups. Correlation consistent sets are given for all of the atoms considered. The most accurate sets determined in this way, [5s4p3d2f1g], consistently yield 99% of the correlation energy obtained with the corresponding ANO sets, even though the latter contains 50% more primitive functions and twice as many primitive polarization functions. It is estimated that this set yields 94%–97% of the total (HF+1+2) correlation energy for the atoms neon through boron.
26,705 citations
TL;DR: In this paper, an analysis of the performances of a parameter free density functional model (PBE0) obtained combining the so-called PBE generalized gradient functional with a predefined amount of exact exchange is presented.
Abstract: We present an analysis of the performances of a parameter free density functional model (PBE0) obtained combining the so called PBE generalized gradient functional with a predefined amount of exact exchange. The results obtained for structural, thermodynamic, kinetic and spectroscopic (magnetic, infrared and electronic) properties are satisfactory and not far from those delivered by the most reliable functionals including heavy parameterization. The way in which the functional is derived and the lack of empirical parameters fitted to specific properties make the PBE0 model a widely applicable method for both quantum chemistry and condensed matter physics.
13,411 citations
TL;DR: In this article, the authors proposed a truncated icosahedron, a polygon with 60 vertices and 32 faces, 12 of which are pentagonal and 20 hexagonal.
Abstract: During experiments aimed at understanding the mechanisms by which long-chain carbon molecules are formed in interstellar space and circumstellar shells1, graphite has been vaporized by laser irradiation, producing a remarkably stable cluster consisting of 60 carbon atoms. Concerning the question of what kind of 60-carbon atom structure might give rise to a superstable species, we suggest a truncated icosahedron, a polygon with 60 vertices and 32 faces, 12 of which are pentagonal and 20 hexagonal. This object is commonly encountered as the football shown in Fig. 1. The C60 molecule which results when a carbon atom is placed at each vertex of this structure has all valences satisfied by two single bonds and one double bond, has many resonance structures, and appears to be aromatic. Before 1985, it was generally accepted that elemental carbon exists in two forms, or allotropes: diamond and graphite. Then, Kroto et al. identified the signature of a new, stable form of carbon that consisted of clusters of 60 atoms. They called this third allotrope of carbon 'buckminsterfullerene', and proposed that it consisted of polyhedral molecules in which the atoms were arrayed at the vertices of a truncated icosahedron. In 1990, the synthesis of large quantities of C60 [see Nature 347, 354–358 (1990)] confirmed this hypothesis.
13,394 citations
TL;DR: In this article, two extended basis sets (termed 5-31G and 6 -31G) consisting of atomic orbitals expressed as fixed linear combinations of Gaussian functions are presented for the first row atoms carbon to fluorine.
Abstract: Two extended basis sets (termed 5–31G and 6–31G) consisting of atomic orbitals expressed as fixed linear combinations of Gaussian functions are presented for the first row atoms carbon to fluorine. These basis functions are similar to the 4–31G set [J. Chem. Phys. 54, 724 (1971)] in that each valence shell is split into inner and outer parts described by three and one Gaussian function, respectively. Inner shells are represented by a single basis function taken as a sum of five (5–31G) or six (6–31G) Gaussians. Studies with a number of polyatomic molecules indicate a substantial lowering of calculated total energies over the 4–31G set. Calculated relative energies and equilibrium geometries do not appear to be altered significantly.
13,036 citations