scispace - formally typeset
Search or ask a question
Book

Current injection in solids

About: The article was published on 1970-01-01 and is currently open access. It has received 3145 citations till now. The article focuses on the topics: Current (fluid).
Citations
More filters
Journal ArticleDOI
30 Jan 2015-Science
TL;DR: An antisolvent vapor-assisted crystallization approach is reported that enables us to create sizable crack-free MAPbX3 single crystals with volumes exceeding 100 cubic millimeters, which enabled a detailed characterization of their optical and charge transport characteristics.
Abstract: The fundamental properties and ultimate performance limits of organolead trihalide MAPbX3 (MA = CH3NH3(+); X = Br(-) or I(-)) perovskites remain obscured by extensive disorder in polycrystalline MAPbX3 films. We report an antisolvent vapor-assisted crystallization approach that enables us to create sizable crack-free MAPbX3 single crystals with volumes exceeding 100 cubic millimeters. These large single crystals enabled a detailed characterization of their optical and charge transport characteristics. We observed exceptionally low trap-state densities on the order of 10(9) to 10(10) per cubic centimeter in MAPbX3 single crystals (comparable to the best photovoltaic-quality silicon) and charge carrier diffusion lengths exceeding 10 micrometers. These results were validated with density functional theory calculations.

3,939 citations


Cites background from "Current injection in solids"

  • ...2 V for MAPbI3) and signaled the transition onto the trap-filled limit (TFL)—a regime in which all the available trap states were filled by the injected carriers (14)....

    [...]

  • ...The link between the trap density and the onset voltage of the trap-filled-limit (TFL) regime is !!"# = !!!!! 2!!!, where !! is the vacuum permittivity (14), while ! represents the material’s dielectric constant – here we use ! = 25....

    [...]

Journal ArticleDOI
30 Jan 2015-Science
TL;DR: A solution-based hot-casting technique is demonstrated to grow continuous, pinhole-free thin films of organometallic perovskites with millimeter-scale crystalline grains that are applicable to several other material systems plagued by polydispersity, defects, and grain boundary recombination in solution-processed thin films.
Abstract: State-of-the-art photovoltaics use high-purity, large-area, wafer-scale single-crystalline semiconductors grown by sophisticated, high-temperature crystal growth processes. We demonstrate a solution-based hot-casting technique to grow continuous, pinhole-free thin films of organometallic perovskites with millimeter-scale crystalline grains. We fabricated planar solar cells with efficiencies approaching 18%, with little cell-to-cell variability. The devices show hysteresis-free photovoltaic response, which had been a fundamental bottleneck for the stable operation of perovskite devices. Characterization and modeling attribute the improved performance to reduced bulk defects and improved charge carrier mobility in large-grain devices. We anticipate that this technique will lead the field toward synthesis of wafer-scale crystalline perovskites, necessary for the fabrication of high-efficiency solar cells, and will be applicable to several other material systems plagued by polydispersity, defects, and grain boundary recombination in solution-processed thin films.

2,960 citations

Journal ArticleDOI
TL;DR: In this paper, the authors review the processes and limitations that govern device operation of polymer-fullerene BHJ solar cells, with respect to the charge-carrier transport and photogeneration mechanism.
Abstract: Plastic solar cells bear the potential for large-scale power generation based on materials that provide the possibility of flexible, lightweight, inexpensive, efficient solar cells. Since the discovery of the photoinduced electron transfer from a conjugated polymer to fullerene molecules, followed by the introduction of the bulk heterojunction (BHJ) concept, this material combination has been extensively studied in organic solar cells, leading to several breakthroughs in efficiency, with a power conversion efficiency approaching 5 %. This article reviews the processes and limitations that govern device operation of polymer.-fullerene BHJ solar cells, with respect to the charge-carrier transport and photogeneration mechanism. The transport of electrons/holes in the blend is a crucial parameter and must be controlled (e.g., by controlling the nanoscale morphology) and enhanced in order to allow fabrication of thicker films to maximize the absorption, without significant recombination losses. Concomitantly, a balanced transport of electrons and holes in the blend is needed to suppress the build-up of the space-charge that will significantly reduce the power conversion efficiency. Dissociation of electron-hole pairs at the donor/acceptor interface is an important process that limits the charge generation efficiency under normal operation condition. Based on these findings, there is a compromise between charge generation (light absorption) and open-circuit voltage (V-oc) when attempting to reduce the bandgap of the polymer (or fullerene). Therefore, an increase in V-oc of polymer.-fullerene cells, for example by raising the lowest unoccupied molecular orbital level of the fullerene, will benefit cell performance as both fill factor and short-circuit current increase simultaneously.

1,987 citations


Cites background or methods from "Current injection in solids"

  • ...If at least one of the contacts is ohmic and the mobility of the charge carrier flowing through the device is constant, the analytical expression for the current density JSCL is given by [6] JSCL = 9 8 εμ V2 int L3 , (2....

    [...]

  • ...The first part of this thesis focuses on a polymer:fullerene system based on a small bandgap diketopyrrolopyrrole-quinquethiophene alternating copolymer (PDPP5T) mixed with [6,6]-phenyl-C71-butyric acid methyl ester ([70]PCBM) that is capable of efficiencies higher than 6%....

    [...]

  • ...46eV) diketopyrrolopyrrole-quinquethiophene alternating copolymer (PDPP5T) [1,2] with [6,6]-phenyl-C71-butyric acid methyl ester ([70]PCBM) (Figure 2....

    [...]

Journal ArticleDOI
TL;DR: This paper is a review of recent progress made in organic thin films grown in ultrahigh vacuum or using other vapor-phase deposition methods and describes the most important work which has been published in this field since the emergence of OMBD in the mid-1980s.
Abstract: During the past decade, enormous progress has been made in growing ultrathin organic films and multilayer structures with a wide range of exciting optoelectronic properties. This progress has been made possible by several important advances in our understanding of organic films and their modes of growth. Perhaps the single most important advance has been the use of ultrahigh vacuum (UHV) as a means to achieve, for the first time, monolayer control over the growth of organic thin films with extremely high chemical purity and structural precision.1-3 Such monolayer control has been possible for many years using well-known techniques such as Langmuir-Blodgett film deposition,4 and more recently, self-assembled monolayers from solution have also been achieved.5 However, ultrahighvacuum growth, sometimes referred to as organic molecular beam deposition (OMBD) or organic molecular beam epitaxy (OMBE), has the advantage of providing both layer thickness control and an atomically clean environment and substrate. When combined with the ability to perform in situ highresolution structural diagnostics of the films as they are being deposited, techniques such as OMBD have provided an entirely new prospect for understanding many of the fundamental structural and optoelectronic properties of ultrathin organic film systems. Since such systems are both of intrinsic as well as practical interest, substantial effort worldwide has been invested in attempting to grow and investigate the properties of such thin-film systems. This paper is a review of recent progress made in organic thin films grown in ultrahigh vacuum or using other vapor-phase deposition methods. We will describe the most important work which has been published in this field since the emergence of OMBD in the mid-1980s. Both the nature of thin-film growth and structural ordering will be discussed, as well as some of the more interesting consequences to the physical properties of such organic thin-film systems will be considered both from a theoretical as well as an experimental viewpoint. Indeed, it will 1793 Chem. Rev. 1997, 97, 1793−1896

1,809 citations