Defects in ZnO
TL;DR: A review of defects in ZnO is presented in this paper, with an emphasis on the physical properties of point defects in bulk crystals, and the problem of acceptor dopants remains a key challenge.
Abstract: Zinc oxide (ZnO) is a wide band gap semiconductor with potential applications in optoelectronics, transparent electronics, and spintronics. The high efficiency of UV emission in this material could be harnessed in solid-state white lighting devices. The problem of defects, in particular, acceptor dopants, remains a key challenge. In this review, defects in ZnO are discussed, with an emphasis on the physical properties of point defects in bulk crystals. As grown, ZnO is usually n-type, a property that was historically ascribed to native defects. However, experiments and theory have shown that O vacancies are deep donors, while Zn interstitials are too mobile to be stable at room temperature. Group-III (B, Al, Ga, and In) and H impurities account for most of the n-type conductivity in ZnO samples. Interstitial H donors have been observed with IR spectroscopy, while substitutional H donors have been predicted from first-principles calculations but not observed directly. Despite numerous reports, reliable p-t...
Citations
More filters
TL;DR: In this paper, a brief overview of synthesis methods of ZnO nanostructures, with particular focus on the growth of perpendicular arrays of nanorods/nanowires which are of interest for optoelectronic device applications.
950 citations
TL;DR: In this article, the performance of zinc oxide (ZnO) has been improved by tailoring its surface-bulk structure and altering its photogenerated charge transfer pathways with an intention to inhibit the surfacebulk charge carrier recombination.
Abstract: As an alternative to the gold standard TiO2 photocatalyst, the use of zinc oxide (ZnO) as a robust candidate for wastewater treatment is widespread due to its similarity in charge carrier dynamics upon bandgap excitation and the generation of reactive oxygen species in aqueous suspensions with TiO2. However, the large bandgap of ZnO, the massive charge carrier recombination, and the photoinduced corrosion–dissolution at extreme pH conditions, together with the formation of inert Zn(OH)2 during photocatalytic reactions act as barriers for its extensive applicability. To this end, research has been intensified to improve the performance of ZnO by tailoring its surface-bulk structure and by altering its photogenerated charge transfer pathways with an intention to inhibit the surface-bulk charge carrier recombination. For the first time, the several strategies, such as tailoring the intrinsic defects, surface modification with organic compounds, doping with foreign ions, noble metal deposition, heterostructuring with other semiconductors and modification with carbon nanostructures, which have been successfully employed to improve the photoactivity and stability of ZnO are critically reviewed. Such modifications enhance the charge separation and facilitate the generation of reactive oxygenated free radicals, and also the interaction with the pollutant molecules. The synthetic route to obtain hierarchical nanostructured morphologies and study their impact on the photocatalytic performance is explained by considering the morphological influence and the defect-rich chemistry of ZnO. Finally, the crystal facet engineering of polar and non-polar facets and their relevance in photocatalysis is outlined. It is with this intention that the present review directs the further design, tailoring and tuning of the physico-chemical and optoelectronic properties of ZnO for better applications, ranging from photocatalysis to photovoltaics.
643 citations
TL;DR: A comprehensive review of Schottky barrier and ohmic contacts including work extending over the past half century is provided in this paper, where the results span the nature of ZnO surface charge transfer, the roles of surface cleaning, crystal quality, chemical interactions, and defect formation.
Abstract: ZnO has emerged as a promising candidate for optoelectronic and microelectronic applications, whose development requires greater understanding and control of their electronic contacts. The rapid pace of ZnO research over the past decade has yielded considerable new information on the nature of ZnO interfaces with metals. Work on ZnO contacts over the past decade has now been carried out on high quality material, nearly free from complicating factors such as impurities, morphological and native point defects. Based on the high quality bulk and thin film crystals now available, ZnO exhibits a range of systematic interface electronic structure that can be understood at the atomic scale. Here we provide a comprehensive review of Schottky barrier and ohmic contacts including work extending over the past half century. For Schottky barriers, these results span the nature of ZnO surface charge transfer, the roles of surface cleaning, crystal quality, chemical interactions, and defect formation. For ohmic contacts...
621 citations
TL;DR: A contemporary review and analysis of the manufacture of ZnO, and its properties, applications, and future prospects can be found in this paper, where the authors provide a survey of the processes used to produce the oxide.
621 citations
TL;DR: This review will discuss recent advances in important and/or controversial issues concerning ZnO properties and its applications, and areas where further improvements are needed.
Abstract: ZnO is a material which is of great interest for a variety of applications due to its unique properties and the availability of a variety of growth methods resulting in a number of different morphologies and a wide range of material properties of synthesized nanostructures. In this review, we will discuss recent advances in important and/or controversial issues concerning ZnO properties and its applications. We will also discuss areas where further improvements are needed, and in particular discuss the issues related to the environmental stability of ZnO and its implications on reproducibility of measurements and the toxicity of ZnO nanomaterials.
592 citations
References
More filters
TL;DR: The semiconductor ZnO has gained substantial interest in the research community in part because of its large exciton binding energy (60meV) which could lead to lasing action based on exciton recombination even above room temperature.
Abstract: The semiconductor ZnO has gained substantial interest in the research community in part because of its large exciton binding energy (60meV) which could lead to lasing action based on exciton recombination even above room temperature. Even though research focusing on ZnO goes back many decades, the renewed interest is fueled by availability of high-quality substrates and reports of p-type conduction and ferromagnetic behavior when doped with transitions metals, both of which remain controversial. It is this renewed interest in ZnO which forms the basis of this review. As mentioned already, ZnO is not new to the semiconductor field, with studies of its lattice parameter dating back to 1935 by Bunn [Proc. Phys. Soc. London 47, 836 (1935)], studies of its vibrational properties with Raman scattering in 1966 by Damen et al. [Phys. Rev. 142, 570 (1966)], detailed optical studies in 1954 by Mollwo [Z. Angew. Phys. 6, 257 (1954)], and its growth by chemical-vapor transport in 1970 by Galli and Coker [Appl. Phys. ...
10,260 citations
TL;DR: Zener's model of ferromagnetism, originally proposed for transition metals in 1950, can explain T(C) of Ga(1-)(x)Mn(x)As and that of its II-VI counterpart Zn(1)-Mn (x)Te and is used to predict materials with T (C) exceeding room temperature, an important step toward semiconductor electronics that use both charge and spin.
Abstract: Ferromagnetism in manganese compound semiconductors not only opens prospects for tailoring magnetic and spin-related phenomena in semiconductors with a precision specific to III-V compounds but also addresses a question about the origin of the magnetic interactions that lead to a Curie temperature (T(C)) as high as 110 K for a manganese concentration of just 5%. Zener's model of ferromagnetism, originally proposed for transition metals in 1950, can explain T(C) of Ga(1-)(x)Mn(x)As and that of its II-VI counterpart Zn(1-)(x)Mn(x)Te and is used to predict materials with T(C) exceeding room temperature, an important step toward semiconductor electronics that use both charge and spin.
7,062 citations
TL;DR: In this article, the authors explore the interrelationships between the green 510 nm emission, the free-carrier concentration, and the paramagnetic oxygen vacancy density in commercial ZnO phosphors by combining photoluminescence, optical absorption, and electron paramagnetic resonance spectroscopies.
Abstract: We explore the interrelationships between the green 510 nm emission, the free‐carrier concentration, and the paramagnetic oxygen‐vacancy density in commercial ZnO phosphors by combining photoluminescence, optical‐absorption, and electron‐paramagnetic‐resonance spectroscopies. We find that the green emission intensity is strongly influenced by free‐carrier depletion at the particle surface, particularly for small particles and/or low doping. Our data suggest that the singly ionized oxygen vacancy is responsible for the green emission in ZnO; this emission results from the recombination of a photogenerated hole with the singly ionized charge state of this defect.
3,487 citations
TL;DR: A first-principles investigation, based on density functional theory, produces strong evidence that hydrogen acts as a source of conductivity: it can incorporate in high concentrations and behaves as a shallow donor.
Abstract: Zinc oxide, a wide-band-gap semiconductor with many technological applications, typically exhibits n-type conductivity. The cause of this conductivity has been widely debated. A first-principles investigation, based on density functional theory, produces strong evidence that hydrogen acts as a source of conductivity: it can incorporate in high concentrations and behaves as a shallow donor. This behavior is unexpected and very different from hydrogen's role in other semiconductors, in which it acts only as a compensating center and always counteracts the prevailing conductivity. These insights have important consequences for control and utilization of hydrogen in oxides in general.
2,970 citations
TL;DR: In this paper, the authors performed a comprehensive first-principles investigation of point defects in ZnO based on density functional theory within the local density approximation (LDA) as well as the $\mathrm{LDA}+U$ approach for overcoming the band-gap problem.
Abstract: We have performed a comprehensive first-principles investigation of native point defects in ZnO based on density functional theory within the local density approximation (LDA) as well as the $\mathrm{LDA}+U$ approach for overcoming the band-gap problem. Oxygen deficiency, manifested in the form of oxygen vacancies and zinc interstitials, has long been invoked as the source of the commonly observed unintentional $n$-type conductivity in ZnO. However, contrary to the conventional wisdom, we find that native point defects are very unlikely to be the cause of unintentional $n$-type conductivity. Oxygen vacancies, which have most often been cited as the cause of unintentional doping, are deep rather than shallow donors and have high formation energies in $n$-type ZnO (and are therefore unlikely to form). Zinc interstitials are shallow donors, but they also have high formation energies in $n$-type ZnO and are fast diffusers with migration barriers as low as $0.57\phantom{\rule{0.3em}{0ex}}\mathrm{eV}$; they are therefore unlikely to be stable. Zinc antisites are also shallow donors but their high formation energies (even in Zn-rich conditions) render them unlikely to be stable under equilibrium conditions. We have, however, identified a different low-energy atomic configuration for zinc antisites that may play a role under nonequilibrium conditions such as irradiation. Zinc vacancies are deep acceptors and probably related to the frequently observed green luminescence; they act as compensating centers in $n$-type ZnO. Oxygen interstitials have high formation energies; they can occur as electrically neutral split interstitials in semi-insulating and $p$-type materials or as deep acceptors at octahedral interstitial sites in $n$-type ZnO. Oxygen antisites have very high formation energies and are unlikely to exist in measurable concentrations under equilibrium conditions. Based on our results for migration energy barriers, we calculate activation energies for self-diffusion and estimate defect-annealing temperatures. Our results provide a guide to more refined experimental studies of point defects in ZnO and their influence on the control of $p$-type doping.
2,865 citations