Design and ageing of adhesives for structural adhesive bonding - A review
01 Oct 2015-Vol. 229, Iss: 5, pp 349-379
TL;DR: In this article, a review outlines some of the issues which have to be addressed when selecting an adhesive for a particular structural adhesive bonding application, and a number of adhesi...
Abstract: This review outlines some of the issues which have to be addressed when selecting an adhesive for a particular structural adhesive bonding application. The designer may find that a number of adhesi...
Citations
More filters
TL;DR: In this article, an updated review of adhesively bonded joints in composite materials, which covers articles published from 2009 to 2016, is presented. And the main parameters that affect the performance of bonded joints such as surface treatment, joint configuration, geometric and material parameters, failure mode etc.
444 citations
01 Aug 2017
TL;DR: In this article, a review on the effect of temperature and moisture on the strength of vehicle adhesive joints is presented, which can help the engineer to design reliable, safe, and efficient adhesive joints.
Abstract: Despite offering very attractive advantages over traditional joining methods, one of the setbacks of adhesive bonding is its long-term strength in aggressive environments, such as environments with high moisture and extreme temperatures. With the rise of new lightweight materials and their recent use in everyday vehicles, transportation industries have been very interested in determining the long-term behavior of adhesive joints. The aim is to build durable, lighter vehicles, which consume less energy and emit less pollution. The two main factors that affect the strength of vehicle adhesive joints are exposure to moist environments and high and low temperatures. There are some works concerning the effect of these two factors separately and some predictive models have been developed, which help the engineer to design reliable, safe, and efficient adhesive joints. However, the combined effect of temperature and moisture is not yet totally understood. This paper presents a review on the temperature and moist...
105 citations
Cites background from "Design and ageing of adhesives for ..."
...Fickian sorption is the most common type of sorption in adhesives.(40) It happens when diffusion is much slower than relaxation and the water uptake is directly proportional to the square root of exposure time (n1⁄4 0....
[...]
TL;DR: In this article, the static strength of adhesive bonded aluminium alloys for the automotive industry has been investigated, and the effect of surface roughness on the strength of single lap joints has been quantified.
85 citations
TL;DR: In this article, the effects of nano-silica on the adhesive properties of epoxy were systematically studied by single lap-shear tests under quasi-static and cyclic loadings.
81 citations
TL;DR: In this paper, an extremely ductile acrylic adhesive was selected to bond a commonly used unidirectional carbon fiber reinforced polymer with an environmentally friendly biopolymer in a single lap joint.
80 citations
References
More filters
TL;DR: In this article, the second-order transition temperature, viscosity-temperature coefficient, and specific volume of fractionated polystyrenes containing diethylbenzene end groups are presented over wide temperature ranges.
Abstract: Dilatometric and viscometric data on fractionated polystyrenes containing diethylbenzene end groups are presented over wide temperature ranges. The second‐order transition temperature, viscosity‐temperature coefficient, and specific volume all change rapidly with increasing molecular weight toward asymptotic limits which are practically reached at M≅30,000. Empirical expressions are presented relating these properties to molecular weight and temperature. In each case the dependence on molecular weight is expressed as a simple function of Mn−1. These observations are interpreted and correlated on the basis of the hypothesis that the local configurational order in a liquid polymer is disturbed by the introduction of end groups to a degree that is proportional to their number. The second‐order transition does not represent an isoviscous state. The internal local configurational structure appears to be equivalent, and independent of temperature, in all polystyrenes below their second‐order transition tempera...
1,901 citations
TL;DR: In this paper, the effects of rubber particle size and rubber-matrix adhesion on notched impact toughness of nylon-rubber blends are analyzed. And the general condition for toughening is that the interparticle distance must be smaller than the critical value.
1,241 citations
Book•
01 Jan 1987
1,085 citations
"Design and ageing of adhesives for ..." refers background in this paper
...Effects of moisture have been recognised for many years and success of Redux to withstand exposure to moisture is legendary.(4,57) In contrast, when water enters an epoxy resin it can plasticise the matrix lowering the Tg by about 10 C for every 1% of water absorbed....
[...]
TL;DR: In this paper, an epoxy resin, cured with an anhydride, has been modified by the addition of silica nanoparticles, and the measured modulus was compared to theoretical models, and good agreement was found.
777 citations
01 Jun 2008
758 citations
"Design and ageing of adhesives for ..." refers background or methods in this paper
...Recently, Kinloch and Taylor et al.33,34 have explored the effects of the addition of nano silica to epoxy resin system....
[...]
...To increase the toughness of this cure system the thermoplastic–poly(ethersulphone) (PES) is added.(33,34)...
[...]
...Recently, Kinloch and Taylor et al.(33,34) have explored the effects of the addition of nano silica to epoxy resin system....
[...]