Design and analysis of mild steel mini truck body for increasing the payload capacity
TL;DR: In this article, the vehicle body is designed to increase the pay load capacity of mini truck from 1.5 tons to 2 tons using CATIA and ANSYS 16.2 FEA commercial software.
About: This article is published in Materials Today: Proceedings.The article was published on 2021-01-01. It has received 18 citations till now. The article focuses on the topics: Chassis & Factor of safety.
Citations
More filters
TL;DR: This project is aimed to convert an IC engine Go-kart into an Electric driven kart, the Frame of the IC engine kart requires a single mount as it needs only Engine and it is developed using SOLIDWORKS, whereas in Electric driven it is a combination of Battery, Motor and Controller and hence it requires a large number of mounts and cross members.
18 citations
TL;DR: In this paper , the authors developed a metal hydrides (MH) based hydrogen storage using a triply periodic minimal surface (TPMS) structure and a mathematical model was developed to analyze and improve its performance in terms of hydrogen absorption and desorption rates.
11 citations
TL;DR: In this article, the effect of the Taguchi process on the plastic oil output of a single-cylinder diesel engine was investigated and the effect parameters such as engine load, injection pressure and plastic oil and magnesium oxide blend ratio were calibrated and defined using the taguchi process and the L9 orthogonal array was developed using the incremental ratio of plastic pyrolysis oil (PPO) to the ratio of Magnesium oxide.
10 citations
TL;DR: In this paper, the thermal efficiency of the cooking stove fuelled by firewood can be increased to achieve maximum efficiency, and a number of design optimizations were made while fabrication to achieve the end goal.
4 citations
TL;DR: Explaining as well as scrutinizing how different regression methods are used for predicting the superconducting critical temperature Tc from Superconductors database collected from Kaggle dataset source.
3 citations
References
More filters
Journal Article•
TL;DR: In this paper, the influence of various machining parameters such as regulating wheel angle, regulating wheel speed and depth of cut over surface roughness and machining time in machining magnesium alloy using silicon carbide grinding wheel was examined.
Abstract: Modern enterprises concentrate on higher production rates with reduced time and admired quality. The surface integrity defines the quality of the product. Several processes like grinding, polishing and buffing have been used to improve the surface texture of the machined products. The most prominent challenge that is faced by an engineer is to manufacture a component with better surface integrity at reduced time, leading to increased production rate and improved profit. It is important to select proper combination of the machining parameters for obtaining the best results. The process called through feed centerless grinding helps in obtaining better surface texture. The main aim of this work is to examine the influence of various machining parameters such as regulating wheel angle, regulating wheel speed and depth of cut over surface roughness and machining time in machining magnesium alloy using silicon carbide grinding wheel. Grey relational analysis method is used for investigating the results. The optimal machining parameters were found with regulating wheel speed, regulating wheel angle and depth of cut being 46 rpm, 2 degree and 0.2 mm.
57 citations
Journal Article•
53 citations
TL;DR: The main fuel for transport is diesel as discussed by the authors, which adds to the success of overall economy, as it is widely used due to its high efficiency in combustion, versatility, unwavering quality and cost-effectiveness.
Abstract: The main fuel for transport is diesel. It adds to the success of overall economy, as it is widely used due to its high efficiency in combustion, versatility, unwavering quality and cost-effectivene...
49 citations
TL;DR: In the recent times, the limitations on the exhaust emissions of the internal combustion engines are becoming increasingly rigorous due to environmental safety as mentioned in this paper, and the limitations are becoming more stringent due to this.
Abstract: In the recent times, the limitations on the exhaust emissions of the internal combustion engines are becoming increasingly rigorous due to environmental safety. Carbon monoxide, oxides of nitrogen,...
49 citations
TL;DR: In this paper, a review of the light goods vehicle (LGV) fleet and its activity, with specific reference to operations in urban areas, and sustainability issues associated with the evergrowing use of LGVs.
47 citations