Journal ArticleDOI
Diaphragm stress analysis and fatigue strength evaluation of the flex-spline, a very thin-walled spur gear used in the strain wave gearing
Reads0
Chats0
TLDR
In this article, a finite element method (FEM) software was developed for diaphragm stress analysis and fatigue strength calculation problems of the flex-spline, a thin-walled spur gear used in the strain wave gearing (SWG).About:
This article is published in Mechanism and Machine Theory.The article was published on 2016-10-01. It has received 19 citations till now. The article focuses on the topics: Strain wave gearing & Finite element method.read more
Citations
More filters
Patent
The strain wave gearing
TL;DR: In this paper, ausen verzahnter Verzahnungsbereich (7, 9) werden so verbogen, dass sie elliptische Formen haben, deren Phasen um eine Rotationszentralachse (1a) um 90° gegeneinander verdreht sind.
Journal ArticleDOI
Study of a harmonic drive with involute profile flexspline by two-dimensional finite element analysis
TL;DR: In this paper, the authors presented simulation results of a harmonic drive (HD) with involute flex spline (FS) profiles based on two-dimensional finite element analysis (FEA).
Journal ArticleDOI
A rapid stress calculation method for short flexspline harmonic drive
TL;DR: In this paper, a rapid stress calculation method based on mechanics analysis and finite element method (FEM) is proposed for short flex-spline harmonic drive (FS) harmonic drive.
Journal ArticleDOI
Influences of spline assembly methods on nonlinear characteristics of spline–gear system
TL;DR: In this article, the effects of spline assembly on the nonlinear characteristics and vibration performance of a gear transmission system were analyzed by finite element contact analysis, and a nonlinear dynamic model of the spline-gear system was established and its accuracy was verified through a vehicle vibration experiment.
Journal ArticleDOI
Tooth effects on assembling bending stress of flexible tooth rim in harmonic drive
TL;DR: In this article, an analytical rack with detailed tooth geometries is constructed for calculating the bending stiffness of the rack via the integration of the second moment of varying-cross-area over an entire tooth pitch.
References
More filters
Journal ArticleDOI
A Mathematical Programming Method for Design of Elastic Bodies in Contact
T. F. Conry,A. Seireg +1 more
Journal ArticleDOI
A Mathematical Programming Technique for the Evaluation of Load Distribution and Optimal Modifications for Gear Systems
T. F. Conry,Ali A. Seireg +1 more
Journal ArticleDOI
Gear Contact Model and Loaded Tooth Contact Analysis of a Three-Dimensional, Thin-Rimmed Gear
TL;DR: In this article, the authors performed loaded tooth contact analysis of a three-dimensional, thin-rimmed gear (3DTRG) by combining the mathematical programming method with the 3DDFEM.
Journal ArticleDOI
Contact problem and numeric method of a planetary drive with small teeth number difference
TL;DR: Li et al. as discussed by the authors used a finite element method (FEM) to solve the contact problem of a planetary drive with small teeth number difference (PDSTD) and found that the maximum load shared by the teeth is much greater than the ones shared by pins and rollers.
Patent
The strain wave gearing
TL;DR: In this paper, ausen verzahnter Verzahnungsbereich (7, 9) werden so verbogen, dass sie elliptische Formen haben, deren Phasen um eine Rotationszentralachse (1a) um 90° gegeneinander verdreht sind.
Related Papers (5)
Shape optimization of tooth profile of a flexspline for a harmonic drive by finite element modelling
Oguz Kayabasi,Fehmi Erzincanli +1 more