Diarylethenes for Memories and Switches
About: This article is published in Chemical Reviews.The article was published on 2000-04-21. It has received 3623 citations till now.
Citations
More filters
TL;DR: The exciting successes in taming molecular-level movement thus far are outlined, the underlying principles that all experimental designs must follow, and the early progress made towards utilizing synthetic molecular structures to perform tasks using mechanical motion are highlighted.
Abstract: The widespread use of controlled molecular-level motion in key natural processes suggests that great rewards could come from bridging the gap between the present generation of synthetic molecular systems, which by and large rely upon electronic and chemical effects to carry out their functions, and the machines of the macroscopic world, which utilize the synchronized movements of smaller parts to perform specific tasks. This is a scientific area of great contemporary interest and extraordinary recent growth, yet the notion of molecular-level machines dates back to a time when the ideas surrounding the statistical nature of matter and the laws of thermodynamics were first being formulated. Here we outline the exciting successes in taming molecular-level movement thus far, the underlying principles that all experimental designs must follow, and the early progress made towards utilizing synthetic molecular structures to perform tasks using mechanical motion. We also highlight some of the issues and challenges that still need to be overcome.
2,301 citations
TL;DR: Switches, and Actuators Masahiro Irie,*, Tuyoshi Fukaminato,‡ Kenji Matsuda, and Seiya Kobatake.
Abstract: Switches, and Actuators Masahiro Irie,*,† Tuyoshi Fukaminato,‡ Kenji Matsuda, and Seiya Kobatake †Research Center for Smart Molecules, Rikkyo University, Nishi-Ikebukuro 3-34-1, Toshima-ku, Tokyo 171-8501, Japan ‡Research Institute for Electronic Science, Hokkaido University, N20, W10, Kita-ku, Sapporo 001-0020, Japan Department of Synthetic Chemistry and Biological Chemistry, Graduate School of Engineering, Kyoto University, Katsura, Nishikyo-ku, Kyoto 615-8510, Japan Department of Applied Chemistry, Graduate School of Engineering, Osaka City University, Sugimoto 3-3-138, Sumiyoshi-ku, Osaka 558-8585, Japan
1,884 citations
1,446 citations
TL;DR: The latest generations of sophisticated synthetic molecular machine systems in which the controlled motion of subcomponents is used to perform complex tasks are discussed, paving the way to applications and the realization of a new era of “molecular nanotechnology”.
Abstract: The widespread use of molecular machines in biology has long suggested that great rewards could come from bridging the gap between synthetic molecular systems and the machines of the macroscopic world. In the last two decades, it has proved possible to design synthetic molecular systems with architectures where triggered large amplitude positional changes of submolecular components occur. Perhaps the best way to appreciate the technological potential of controlled molecular-level motion is to recognize that nanomotors and molecular-level machines lie at the heart of every significant biological process. Over billions of years of evolution, nature has not repeatedly chosen this solution for performing complex tasks without good reason. When mankind learns how to build artificial structures that can control and exploit molecular level motion and interface their effects directly with other molecular-level substructures and the outside world, it will potentially impact on every aspect of functional molecule and materials design. An improved understanding of physics and biology will surely follow.
The first steps on the long path to the invention of artificial molecular machines were arguably taken in 1827 when the Scottish botanist Robert Brown observed the haphazard motion of tiny particles under his microscope.1,2 The explanation for Brownian motion, that it is caused by bombardment of the particles by molecules as a consequence of the kinetic theory of matter, was later provided by Einstein, followed by experimental verification by Perrin.3,4 The random thermal motion of molecules and its implications for the laws of thermodynamics in turn inspired Gedankenexperiments (“thought experiments”) that explored the interplay (and apparent paradoxes) of Brownian motion and the Second Law of Thermodynamics. Richard Feynman’s famous 1959 lecture “There’s plenty of room at the bottom” outlined some of the promise that manmade molecular machines might hold.5,6 However, Feynman’s talk came at a time before chemists had the necessary synthetic and analytical tools to make molecular machines. While interest among synthetic chemists began to grow in the 1970s and 1980s, progress accelerated in the 1990s, particularly with the invention of methods to make mechanically interlocked molecular systems (catenanes and rotaxanes) and control and switch the relative positions of their components.7−24
Here, we review triggered large-amplitude motions in molecular structures and the changes in properties these can produce. We concentrate on conformational and configurational changes in wholly covalently bonded molecules and on catenanes and rotaxanes in which switching is brought about by various stimuli (light, electrochemistry, pH, heat, solvent polarity, cation or anion binding, allosteric effects, temperature, reversible covalent bond formation, etc.). Finally, we discuss the latest generations of sophisticated synthetic molecular machine systems in which the controlled motion of subcomponents is used to perform complex tasks, paving the way to applications and the realization of a new era of “molecular nanotechnology”.
1.1. The Language Used To Describe Molecular Machines
Terminology needs to be properly and appropriately defined and these meanings used consistently to effectively convey scientific concepts. Nowhere is the need for accurate scientific language more apparent than in the field of molecular machines. Much of the terminology used to describe molecular-level machines has its origins in observations made by biologists and physicists, and their findings and descriptions have often been misinterpreted and misunderstood by chemists. In 2007 we formalized definitions of some common terms used in the field (e.g., “machine”, “switch”, “motor”, “ratchet”, etc.) so that chemists could use them in a manner consistent with the meanings understood by biologists and physicists who study molecular-level machines.14
The word “machine” implies a mechanical movement that accomplishes a useful task. This Review concentrates on systems where a stimulus triggers the controlled, relatively large amplitude (or directional) motion of one molecular or submolecular component relative to another that can potentially result in a net task being performed. Molecular machines can be further categorized into various classes such as “motors” and “switches” whose behavior differs significantly.14 For example, in a rotaxane-based “switch”, the change in position of a macrocycle on the thread of the rotaxane influences the system only as a function of state. Returning the components of a molecular switch to their original position undoes any work done, and so a switch cannot be used repetitively and progressively to do work. A “motor”, on the other hand, influences a system as a function of trajectory, meaning that when the components of a molecular motor return to their original positions, for example, after a 360° directional rotation, any work that has been done is not undone unless the motor is subsequently rotated by 360° in the reverse direction. This difference in behavior is significant; no “switch-based” molecular machine can be used to progressively perform work in the way that biological motors can, such as those from the kinesin, myosin, and dynein superfamilies, unless the switch is part of a larger ratchet mechanism.14
1,434 citations
TL;DR: The tutorial review presented herein describes developments in diarylethene-based molecular switches made in the last three years and includes the synthetic aspects of diaryle thene photochromic compounds, which are important issues and neglected in most previous reviews.
Abstract: Organic photochromic materials have received considerable attention because of their potential for photonic applications, especially for fast and high density data storage. In 2000, Chemical Reviews published a special issue on photochromic materials including a review about the properties and applications of diarylethene photochromic compounds. Since then much impressive progress has been made in this area. Various new diarylethene derivatives have been prepared and examined. The tutorial review presented herein describes developments in diarylethene-based molecular switches made in the last three years. In addition, the synthetic aspects of diarylethene photochromic compounds, which are important issues and neglected in most previous reviews, have been included.
1,411 citations
References
More filters
TL;DR: The transition metal-catalyzed reactions of organometallics with organic halides have been extensively studied to prove a new approach to selective formation of carbon-carbon bonds as mentioned in this paper.
1,703 citations
TL;DR: Trans-cis photoisomerization of azobenzene with a laser pulse resulted in a nematic-to-isotropic phase transition with a rapid optical response of 200 microseconds.
Abstract: Liquid crystals are promising materials for optical switching and image storage because of their high resolution and sensitivity. Azobenzene liquid crystals (LCs) have been developed, in which azobenzene moieties play roles as both mesogens and photosensitive chromophores. Azobenzene LC films showed a nematic phase in trans isomers and no LC phase in cis isomers. Trans-cis photoisomerization of azobenzene with a laser pulse resulted in a nematic-to-isotropic phase transition with a rapid optical response of 200 microseconds.
1,432 citations
1,167 citations
TL;DR: In this paper, near-field scanning optical microscopy (NSOM) has been used to image and record domains in thin-film magneto-optic (MO) materials.
Abstract: Near‐field scanning optical microscopy (NSOM) has been used to image and record domains in thin‐film magneto‐optic (MO) materials. In the imaging mode, resolution of 30–50 nm has been consistently obtained, whereas in the recording mode, domains down to ∼60 nm have been written reproducibly. Data densities of ∼45 Gbits/in.2 have been achieved, well in excess of current magnetic or MO technologies. A brief analysis of speed and other issues indicates that the technique may represent a viable alternative to these and other methods for anticipated high density data storage needs.
783 citations
635 citations