scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Diffusion regimes at nanoelectrode ensembles in different ionic liquids

01 Mar 2010-Electrochimica Acta (Pergamon)-Vol. 55, Iss: 8, pp 2865-2872
TL;DR: In this article, the electrochemical and diffusion behavior of different redox probes in different ionic liquids is studied at gold nanoelectrode ensembles (NEEs) in comparison with millimetre sized gold (Au-macro) and glassy carbon (GC) disk electrodes.
About: This article is published in Electrochimica Acta.The article was published on 2010-03-01 and is currently open access. It has received 34 citations till now. The article focuses on the topics: Diffusion & Ionic liquid.

Summary (2 min read)

2.1. Apparatus and procedures

  • Voltammetric measurements were performed with a CH660A apparatus controlled via PC, using IR-drop compensation.
  • All electroanalytical measurements were carried out in a three-electrodes cell of small volume (5 mL).
  • ILs were dried overnight in a vacuum oven at 40 C before use, after treatment with activated molecular sieves.
  • It was previously demonstrated that this procedure is able to remove trace water from hygroscopic IL such as [BMIm][BF 4 ] [38] .
  • All measurements were performed at room temperature (20 ± 1 C), operating under a nitrogen atmosphere; the purging gas fluxed trough traps loaded with concentrated sulphuric acid, in order to prevent eventual entrance into the cell of humidity from the room environment.

2.3. Chemicals

  • [BMIm], [BMPy] and [P 14,666 ] ionic liquids were prepare by ion metathesis reaction of their chloride salts with either NaN(CN) 2 or LiN(Tf) 2 in dichloromethane (DCM) solvent.
  • The procedure involves firstly dissolving the quaternary ammonium or phosphonium cation salt in DCM followed by the addition of 1.2 equivalents of the anion salt.
  • The DCM solution of the crude ionic liquid was washed (5×) with deionised water.
  • Activated carbon was then added to the ionic liquid and stirred for 24 h.
  • All other reagents were of analytical grade and used as received.

3.1. GC-macro

  • In any case, the cross-comparison of their D values, all measured with the same procedure, indicates that the diffusion coefficients of the ionic derivatives are smaller than those of neutral ferrocene.
  • This suggests the occurrence of a stronger interaction of the ILs with the ionic ferrocenes.
  • In ILs, the lowering of diffusion coefficients for ionic species with respect to their neutral analogues is indeed documented in the literature [11, 12] .
  • Compton et al. demonstrated [45] , that the D value for neutral ferrocene is much larger than D for the ferricinium cation, the same holding also for the cobaltocene/cobalticinium couple.
  • A comparable unequality in diffusion coefficients of the butylviologen dication vs. the mono-cationic radical was reported to be the cause of differences in reduction peak currents for the two species in [BMIm][BF 4 ] [15].

3.2. Au-macro

  • In the following part of this research the authors were interested in investigating mainly the role of the solvent on the diffusion of the analyte to the nanoelectrodes, therefore they chose to avoid any complication by adsorption or other non-diffusion controlled processes by focusing their attention on the behaviour of ferrocene and its derivatives in the [N(Tf) 2 ] containing ILs.
  • At low scan rates peak shaped voltammograms are recorded which become sigmoidally shaped at higher scan rates, however with a shift detectable between the forward and backward patterns.
  • On the basis of recent reports [26] , the CV shape observed at high scan rates could be considered typical of the mixed diffusion layers regime, which is observed when there is a partial overlapping of individual diffusion layers.
  • Even the contribution of the double-layer charging current (I c ) cannot be neglected, since such a capacitive current can also be responsible for the lack of overlap between the forward and backward voltammetric patterns.
  • Note that in IL double-layer charging currents are significantly higher than that in water.

3.3. Voltammetry with NEEs

  • Further studies were performed focusing on the CV behaviour on NEEs of the ionic probes FcCOO − or FA + in the ILs.
  • As shown for instance in Fig. 7 for the typical case of 1 mM FcCOO − in [BmPy][N(Tf) 2 ], both the shape of the CV (Fig. 7A ) as well as the scarce scan rate dependence of I max (Fig. 7B ) indicate that crosstalking between the nanoelectrodes is dramatically reduced for any of the scan rates explored.

4. Conclusions

  • Finally, gold is not the electrode material of choice for measurements under diffusion control in [N(CN) 2 ] containing ILs, since this anion favours the adsorption of electroactive redox molecules on the electrode surface.
  • No such problem was found in [NTf 2 ] containing ILs while at GC electrodes diffusion controlled processes are observed both in the presence of [N(CN) 2 ] and [NTf 2 ].

Did you find this useful? Give us your feedback

Figures (9)
Citations
More filters
Journal ArticleDOI
TL;DR: The design of a novel immunosensor and its application for celiac disease diagnosis, based on an electrogenerated chemiluminescence (ECL) readout, using membrane-templated gold nanoelectrode ensembles (NEEs) as a detection platform, showing to be suitable to discriminate between healthy and celiac patients.
Abstract: We report here the design of a novel immunosensor and its application for celiac disease diagnosis, based on an electrogenerated chemiluminescence (ECL) readout, using membrane-templated gold nanoelectrode ensembles (NEEs) as a detection platform. An original sensing strategy is presented by segregating spatially the initial electrochemical reaction and the location of the immobilized biomolecules where ECL is finally emitted. The recognition scaffold is the following: tissue transglutaminase (tTG) is immobilized as a capturing agent on the polycarbonate (PC) surface of the track-etched templating membrane. It captures the target tissue transglutaminase antibody (anti-tTG), and finally allows the immobilization of a streptavidin-modified ruthenium-based ECL label via reaction with a suitable biotinylated secondary antibody. The application of an oxidizing potential in a tri-n-propylamine (TPrA) solution generates an intense and sharp ECL signal, suitable for analytical purposes. Voltammetric and ECL analy...

60 citations

Journal ArticleDOI
TL;DR: In this article, an electrochemical sensor based on Ag nanoparticles anchored onto CuO porous nanobelts (Ag/CuO PNBs) was constructed for the ultrasensitive determination of dopamine (DA), which was prepared via a facile two-step cation-exchange reaction followed by in-situ thermal conversion.
Abstract: The potential capability to rapid, highly sensitive, and selective diagnose neurotransmitters in human serum environment is extremely crucial for clinical biology. Herein an electrochemical sensor based on Ag nanoparticles anchored onto CuO porous nanobelts (Ag/CuO PNBs) was constructed for the ultrasensitive determination of dopamine (DA), which was prepared via a facile two-step cation-exchange reaction followed by in-situ thermal conversion. The Ag/CuO PNBs exhibited an excellent electrochemical sensing performance to DA. The linear range for the detection of DA was ranged from 0.04 to 10 μM with an outstanding detection limit of 7.0 nM. Cyclic voltammograms (CVs) were employed to investigate kinetic information of multiphase electron transfer reactions, revealing that Ag nanoparticles significantly enhanced electrocatalytic activity toward DA owing to the participation of Ag(0)/Ag(I) cycle. Meanwhile, the Ag/CuO PNBs showed the significant selectivity, remarkable stability and repeatability, as well as attractive reproducibility (RSD ≤ 3.7 %). Furthermore, the practicality of the developed sensor has been evaluated by analyzing DA in serum-containing electrolyte, and the recovery in the range of 95.7∼111.1 % was obtained. The results confirmed that the as-prepared sensor presented a significant promise for the detection of DA in real sample analysis.

59 citations

Journal ArticleDOI
TL;DR: A sensitive and anti-interference electrochemical sensing interface for the analysis of Pb(II) was constructed by using MoS2/rGO nanocomposite modified glassy carbon electrode (MoS2 /rGO-GCE), and experiments indicated that the proposed method has good stability and reproducibility.

47 citations

Journal ArticleDOI
TL;DR: In this article, a porous flower-like NiO/rGO nanocomposite modified glassy carbon electrode (GCE) was used for detecting Pb(II) in real water samples from Taochong wastewater treatment plant in Hefei city.
Abstract: Herein, combining the good catalysis of NiO with high adsorption and conductivity of reduced graphene oxide (rGO), the electrochemical sensing interface was constructed using the porous flower-like NiO/rGO nanocomposite modified glassy carbon electrode (GCE). The result of Pb(II) detection was obtained with high sensitivity of 92.81 μM μA−1 and low detection limit of 0.01 μM by square wave anodic stripping voltammetry (SWASV). The reasonable sensitive mechanism for enhancing electrochemical performance is that the excellent adsorption capacity and Ni(II)/Ni(III) cycle on surface of NiO/rGO nanocomposite could improve the electrochemical detection signal. Furthermore, the proposed method achieved the high anti-interference on the determination of Pb(II) in the co-existence of Cd(II), Cu(II), Hg(II). The excellent stability and reproducibility were also confirmed by repeatedly test. In addition, the concentration of Pb(II) in real water samples from Taochong wastewater treatment plant in Hefei city were analyzed and calculated accurately. These results indicates that the NiO/rGO nanocomposite as a promising electrode modifier could be potentially applied in electrochemical sensor for detecting Pb(II).

47 citations

Journal ArticleDOI
TL;DR: This review deals with recent advances in bioelectroanalytical applications of nanostructured electrodes, in particular nanoelectrode ensembles (NEEs) and arrays (NEAs), and nanofabrication techniques, principles of function, and specific advantages and limits of NEEs and NEAs.
Abstract: This review deals with recent advances in bioelectroanalytical applications of nanostructured electrodes, in particular nanoelectrode ensembles (NEEs) and arrays (NEAs). First, nanofabrication techniques, principles of function, and specific advantages and limits of NEEs and NEAs are critically discussed. In the second part, some recent examples of bioelectroanalytical applications are presented. These include use of nanoelectrode arrays and/or ensembles for direct electrochemical analysis of pharmacologically active organic compounds or redox proteins, and the development of functionalized nanoelectrode systems and their use as catalytic or affinity electrochemical biosensors.

47 citations


Cites background from "Diffusion regimes at nanoelectrode ..."

  • ...[67]) Bioelectroanalysis with nanoelectrode arrays 3721...

    [...]

  • ...It has recently been shown that, for NEE, transition from the total overlap to the pure radial diffusion can be observed on increasing electrolyte viscosity [67]....

    [...]

References
More filters
Journal ArticleDOI
TL;DR: In this article, the cyclic voltammetric (CV) behavior of redox probes at 3DNEEs is examined and compared with the behavior observed at 2D-NEEs.
Abstract: Nanoelectrode ensembles (NEEs) of gold nanodisks, prepared by electroless template deposition of gold within the pores of track-etched polycarbonate membranes, are treated with oxygen plasma or with solvent mixtures in order to achieve controlled etching of part of the polycarbonate of the template. This causes the structure of the final ensemble to change from a 2-D flat structure into a 3-D one. The cyclic voltammetric (CV) behavior of redox probes at the 3DNEEs is examined and compared with the behavior observed at 2D-NEEs. Finally, 3D-NEEs are examined in order to test possible applications for the development of mediated sensors.

89 citations

Journal ArticleDOI
TL;DR: In this article, the parameters controlling electroless gold deposition in track-etched polycarbonate membranes were studied and the structure and morphology of obtained nanomaterials were examined and compared by a variety of electron microscopies and atomic force microscopy and examined in relation to electrochemical and spectrophotometric results.
Abstract: The template method for preparing nanomaterials entails synthesis of tubular or fibrillar nanostructures within the pores of a microporous membrane. If the holes are completely filled, solid nanowires result, while a partial filling with a continuous coating gives rise to nanotubes. This paper focused on the study of the parameters controlling electroless gold deposition in track-etched polycarbonate membranes. The structure and morphology of the obtained nanomaterials are examined and compared by a variety of electron microscopies and atomic force microscopy and examined in relation to electrochemical and spectrophotometric results. As far as nanotubes are concerned, problems with obtaining such a nanostructure are observed, in particular when membranes with pore diameters equal to or smaller than 30 nm are used. In the case of nanowires, defects related to fabrication problems are evidenced when they are used to prepare nanoelectrode ensembles (NEEs), because defects dramatically influence their voltamm...

83 citations

Journal ArticleDOI
TL;DR: In this article, the electrochemical and mass-transport properties of a redox-active ionic liquid, 1-(ferrocenylmethyl)-3-methylimidazolium bis(trifluoromethanesulfonyl)amide (FcEmiTFSI), were investigated for the pure compound and for solutions in acetonitrile (ACN) and in a room-temperature ionic fluid, 1-ethyl-3methyloridazolate (MTHI)-imide (EmI-imide

80 citations

Journal ArticleDOI
TL;DR: In this paper, the cyclic voltammetric response of partially blocked electrodes is modeled using finite difference simulations, and a method is presented for the determination of currents at electrode surfaces that have an unstructured blocking pattern.
Abstract: The cyclic voltammetric response of partially blocked electrodes is modeled using finite difference simulations, and a method is presented for the determination of currents at electrode surfaces that have an unstructured blocking pattern. The method is first applied to predict the current at purposely fabricated gold film electrodes in which monodispersed blocking disks are randomly sprinkled over the gold surface. The theoretical models are subsequently applied to the case of a basal plane pyrolytic graphite electrode modified with microdroplets of an electrochemically inactive oil. The theoretically predicted results are in good agreement with those observed experimentally.

79 citations

Frequently Asked Questions (1)
Q1. What have the authors contributed in "Iffusion regimes at nanoelectrode ensembles in different ionic liquids" ?

The electrochemical and diffusion behaviour of different redox probes in different ionic liquids is studied at gold nanoelectrode ensembles ( NEEs ) in comparison with millimetre sized gold ( Au-macro ) and glassy carbon ( GC ) disk electrodes. The ILs are the dicyanamide, [ N ( CN ) 2 ] or bis ( trifluoromethylsulfonyl ) amide ), [ N ( Tf ) 2 ] salts of the following cations: 1-butyl-3-methylimidazolium, [ BMIm ], 1-butyl-3-methylpyrrolidonium, [ BMPy ], or tris ( nhexyl ) tetradecylphosphonium [ P14,666 ]. For this reason the diffusion at gold NEEs is studied only in the former ILs.