Direct patterning of vortex generators on a fiber tip using a focused ion beam
TL;DR: The realization of spiral phase optical elements on the cleaved end of an optical fiber by focused ion beam milling is presented and are expected to be promising candidates for all-fiber beam shaping and optical trapping applications.
Abstract: The realization of spiral phase optical elements on the cleaved end of an optical fiber by focused ion beam milling is presented. A focused Ga+ ion beam with an acceleration voltage of 30 keV is used to etch continuous spiral phase plates and fork gratings directly on the tip of the fiber. The phase characteristics of the output beam generated by the fabricated structures measured via an interference experiment confirmed the presence of phase singularity in the output beam. The devices are expected to be promising candidates for all-fiber beam shaping and optical trapping applications.
Citations
More filters
Journal Article•
TL;DR: In this article, a fast Fourier transform method of topography and interferometry is proposed to discriminate between elevation and depression of the object or wave-front form, which has not been possible by the fringe-contour generation techniques.
Abstract: A fast-Fourier-transform method of topography and interferometry is proposed. By computer processing of a noncontour type of fringe pattern, automatic discrimination is achieved between elevation and depression of the object or wave-front form, which has not been possible by the fringe-contour-generation techniques. The method has advantages over moire topography and conventional fringe-contour interferometry in both accuracy and sensitivity. Unlike fringe-scanning techniques, the method is easy to apply because it uses no moving components.
3,742 citations
TL;DR: In this article, a tutorial-cum-review-type article is presented to explain the relation between scalar fields and Stokes fields and the singularities in each of them, where the authors demonstrate this by theoretically and experimentally generating polarization singularities using phase singularities.
Abstract: Polarization singularities are superpositions of orbital angular momentum (OAM) states in orthogonal circular polarization basis. The intrinsic OAM of light beams arises due to the helical wavefronts of phase singularities. In phase singularities, circulating phase gradients and, in polarization singularities, circulating Stokes phase gradients are present. At the phase and polarization singularities, undefined quantities are the phase and Stokes phase, respectively. Conversion of circulating phase gradient into circulating Stokes phase gradient reveals the connection between phase (scalar) and polarization (vector) singularities. We demonstrate this by theoretically and experimentally generating polarization singularities using phase singularities. Furthermore, the relation between scalar fields and Stokes fields and the singularities in each of them is discussed. This paper is written as a tutorial-cum-review-type article keeping in mind the beginners and researchers in other areas, yet many of the concepts are given novel explanations by adopting different approaches from the available literature on this subject.
56 citations
TL;DR: In this article, the authors address the needs of scientists and engineers who desire to generate/detect OAM modes and are looking for the technique (active or passive) best suited for their application.
Abstract: Orbital angular momentum (OAM), one of the most recently discovered degrees of freedom of light beam field has fundamentally revolutionized optical physics and its technological capabilities. Optical beams with OAM have enabled a large variety of applications, including super-resolution imaging, optical trapping, classical and quantum optical communication, and quantum computing, to mention a few. To enable these and several other emerging applications, optical beams with OAM have been generated using a variety of methods and technologies, such as a simple astigmatic lens pair, one-/two-dimensional holographic optical elements, three-dimensional spiral phase plates, optical fibers, and recent entrants such as metasurfaces. All these techniques achieve spatial light modulation and can be implemented with either passive elements or active devices, such as liquid crystal on silicon and digital micromirror devices. Many of these devices and technologies are not only used for the generation of amplitude phase-polarization structured light beams but are also capable of analyzing them. We have attempted to encompass a wide variety of such technologies as well as a few emerging methodologies, broadly categorized into generation and detection protocols. We address the needs of scientists and engineers who desire to generate/detect OAM modes and are looking for the technique (active or passive) best suited for their application.
40 citations
Cites background from "Direct patterning of vortex generat..."
...Advances in focused ion beam milling technology enabled the fabrication of a refractive SPP directly on the tip of an optical fiber.(53) An electron beam microscope image of the fabricated element on a single-mode fiber (SMF) is shown in Fig....
[...]
TL;DR: This review presents an overview of the main achievements, most impactful studies and limitations of fiber tip-based configurations within the above three fields, along the past 10 years.
36 citations
TL;DR: The fabrication of a three-dimensional structure achieved by direct nanoimprint lithography on the facet of an optical fiber should enable advancements in areas such as integrated optics and sensing, achieving enhanced portability and versatility of fiber optic components.
Abstract: Integration of complex photonic structures onto optical fiber facets enables powerful platforms with unprecedented optical functionalities. Conventional nanofabrication technologies, however, do not permit viable integration of complex photonic devices onto optical fibers owing to their low throughput and high cost. In this paper we report the fabrication of a three-dimensional structure achieved by direct nanoimprint lithography on the facet of an optical fiber. Nanoimprint processes and tools were specifically developed to enable a high lithographic accuracy and coaxial alignment of the optical device with respect to the fiber core. To demonstrate the capability of this new approach, a 3D beam splitter has been designed, imprinted and optically characterized. Scanning electron microscopy and optical measurements confirmed the good lithographic capabilities of the proposed approach as well as the desired optical performance of the imprinted structure. The inexpensive solution presented here should enable advancements in areas such as integrated optics and sensing, achieving enhanced portability and versatility of fiber optic components.
32 citations
References
More filters
Journal Article•
TL;DR: In this article, a fast Fourier transform method of topography and interferometry is proposed to discriminate between elevation and depression of the object or wave-front form, which has not been possible by the fringe-contour generation techniques.
Abstract: A fast-Fourier-transform method of topography and interferometry is proposed. By computer processing of a noncontour type of fringe pattern, automatic discrimination is achieved between elevation and depression of the object or wave-front form, which has not been possible by the fringe-contour-generation techniques. The method has advantages over moire topography and conventional fringe-contour interferometry in both accuracy and sensitivity. Unlike fringe-scanning techniques, the method is easy to apply because it uses no moving components.
3,742 citations
TL;DR: In this paper, a fast Fourier transform method of topography and interferometry is proposed to discriminate between elevation and depression of the object or wave-front form, which has not been possible by the fringe-contour generation techniques.
Abstract: A fast-Fourier-transform method of topography and interferometry is proposed. By computer processing of a noncontour type of fringe pattern, automatic discrimination is achieved between elevation and depression of the object or wave-front form, which has not been possible by the fringe-contour-generation techniques. The method has advantages over moire topography and conventional fringe-contour interferometry in both accuracy and sensitivity. Unlike fringe-scanning techniques, the method is easy to apply because it uses no moving components.
3,650 citations
TL;DR: In this paper, the authors demonstrate the ability to multiplex and transfer data between twisted beams of light with different amounts of orbital angular momentum, which provides new opportunities for increasing the data capacity of free-space optical communications links.
Abstract: Researchers demonstrate the ability to multiplex and transfer data between twisted beams of light with different amounts of orbital angular momentum — a development that provides new opportunities for increasing the data capacity of free-space optical communications links.
3,556 citations
TL;DR: Laser beams that contain phase singularities can be generated with computer-generated holograms, which in the simplest case have the form of spiral Fresnel zone plates.
Abstract: Laser beams that contain phase singularities can be generated with computer-generated holograms, which in the simplest case have the form of spiral Fresnel zone plates.
1,251 citations
TL;DR: In this article, a Laguerre-Gaussian (doughnut) beam whose frequency is blue detuned to the atomic transition was used to trap neutral atoms in the dark core of the doughnut beam with the help of two additional laser beams.
Abstract: We have constructed a novel optical trap for neutral atoms by using a Laguerre-Gaussian (doughnut) beam whose frequency is blue detuned to the atomic transition. Laser-cooled rubidium atoms are trapped in the dark core of the doughnut beam with the help of two additional laser beams which limit the atomic motion along the optical axis. About ${10}^{8}$ atoms are initially loaded into the trap, and the lifetime is 150 ms. Because the atoms are confined at a point in a weak radiation field in the absence of any external field, ideal circumstances are provided for precision measurements. The trap opens the way to a simple technique for atom manipulation, including Bose-Einstein condensation of gaseous atoms.
781 citations