Direct visualization of optical frequency invisibility cloak based on silicon nanorod array.
TL;DR: This work implemented a new invisibility cloak using an array of silicon nanorods fabricated by electron-beam lithography, and directly visualized the cloaking effect by monitoring the light propagation inside the device using the near-field optical microscopy.
Abstract: A new invisibility cloak was recently proposed for hiding objects in front of a highly reflecting mirror. This cloak requires only modest values of optical constants with minimal anisotropy and thus can be implemented by using non-resonant dielectric materials, making it an ideal system for optical frequency operation. We implemented the cloak using an array of silicon nanorods fabricated by electron-beam lithography. We then directly visualized the cloaking effect by monitoring the light propagation inside the device using the near-field optical microscopy.
Citations
More filters
TL;DR: A three-dimensional invisibility-cloaking structure operating at optical wavelengths based on transformation optics is designed and realized and uses a woodpile photonic crystal with a tailored polymer filling fraction to hide a bump in a gold reflector.
Abstract: We have designed and realized a three-dimensional invisibility-cloaking structure operating at optical wavelengths based on transformation optics. Our blueprint uses a woodpile photonic crystal with a tailored polymer filling fraction to hide a bump in a gold reflector. We fabricated structures and controls by direct laser writing and characterized them by simultaneous high-numerical-aperture, far-field optical microscopy and spectroscopy. A cloaking operation with a large bandwidth of unpolarized light from 1.4 to 2.7 micrometers in wavelength is demonstrated for viewing angles up to 60 degrees.
1,141 citations
TL;DR: A bilayer thermal cloak made of bulk isotropic materials is demonstrated, and it has been validated as an exact cloak and the robustness of this scheme is validated in both 2D (including oblique heat front incidence) and 3D configurations.
Abstract: Invisibility has attracted intensive research in various communities, e.g., optics, electromagnetics, acoustics, thermodynamics, dc, etc. However, many experimental demonstrations have only been achieved by virtue of simplified approaches due to the inhomogeneous and extreme parameters imposed by the transformation-optic method, and usually require a challenging realization with metamaterials. In this Letter, we demonstrate a bilayer thermal cloak made of bulk isotropic materials, and it has been validated as an exact cloak. We experimentally verified its ability to maintain the heat front and its heat protection capabilities in a 2D proof-of-concept experiment. The robustness of this scheme is validated in both 2D (including oblique heat front incidence) and 3D configurations. The proposed scheme may open a new avenue to control the diffusive heat flow in ways inconceivable with phonons, and also inspire new alternatives to the functionalities promised by transformation optics.
431 citations
TL;DR: Finite difference time domain (FDTD) simulations indicate that absorption efficiencies greater than 99% can be achieved for both resonance frequencies at normal incidence and the tunable range of the resonant frequency was modeled up to 700 nm by varying the dimensions of the three-layer, elliptical nanodisk array.
Abstract: We have designed and fabricated a dual-band plasmonic absorber in the near-infrared by employing a three-layer structure comprised of an elliptical nanodisk array on top of thin dielectric and metallic films. finite difference time domain (FDTD) simulations indicate that absorption efficiencies greater than 99% can be achieved for both resonance frequencies at normal incidence and the tunable range of the resonant frequency was modeled up to 700 nm by varying the dimensions of the three-layer, elliptical nanodisk array. The symmetry in our two-dimensional nanodisk array eliminates any polarization dependence within the structure, and the near-perfect absorption efficiency is only slightly affected by large incidence angles up to 50 degrees. Experimental measurements demonstrate good agreement with our simulation results.
285 citations
TL;DR: In this paper, it was shown that an ordinary positively refracting optical medium may form perfect images as well, and a mathematical proof was established that the fish eye in two-dimensional (2D) integrated optics makes a perfect instrument with a resolution not limited by the wavelength of light.
Abstract: Perfect imaging has been believed to rely on negative refraction, but here we show that an ordinary positively refracting optical medium may form perfect images as well. In particular, we establish a mathematical proof that Maxwell's fish eye in two-dimensional (2D) integrated optics makes a perfect instrument with a resolution not limited by the wavelength of light. We also show how to modify the fish eye such that perfect imaging devices can be made in practice. Our method of perfect focusing may also find applications outside of optics, in acoustics, fluid mechanics or quantum physics, wherever waves obey the 2D Helmholtz equation.
251 citations
TL;DR: It is demonstrated that thermodynamic cloak can be achieved with homogeneous and finite conductivity only employing naturally available materials and the thermal localization inside the coating layer can be tuned and controlled robustly by anisotropy, which enables an incomplete cloak to function perfectly.
Abstract: Invisible cloak has long captivated the popular conjecture and attracted intensive research in various communities of wave dynamics, eg, optics, electromagnetics, acoustics, etc However, their inhomogeneous and extreme parameters imposed by transformation-optic method will usually require challenging realization with metamaterials, resulting in narrow bandwidth, loss, polarization-dependence, etc In this paper, we demonstrate that thermodynamic cloak can be achieved with homogeneous and finite conductivity only employing naturally available materials It is demonstrated that the thermal localization inside the coating layer can be tuned and controlled robustly by anisotropy, which enables an incomplete cloak to function perfectly Practical realization of such homogeneous thermal cloak has been suggested by using two naturally occurring conductive materials, which provides an unprecedentedly plausible way to flexibly realize thermal cloak and manipulate heat flow with phonons
186 citations
References
More filters
TL;DR: This work shows how electromagnetic fields can be redirected at will and proposes a design strategy that has relevance to exotic lens design and to the cloaking of objects from electromagnetic fields.
Abstract: Using the freedom of design that metamaterials provide, we show how electromagnetic fields can be redirected at will and propose a design strategy. The conserved fields-electric displacement field D, magnetic induction field B, and Poynting vector B-are all displaced in a consistent manner. A simple illustration is given of the cloaking of a proscribed volume of space to exclude completely all electromagnetic fields. Our work has relevance to exotic lens design and to the cloaking of objects from electromagnetic fields.
7,811 citations
TL;DR: This work describes here the first practical realization of a cloak of invisibility, constructed with the use of artificially structured metamaterials, designed for operation over a band of microwave frequencies.
Abstract: A recently published theory has suggested that a cloak of invisibility is in principle possible, at least over a narrow frequency band. We describe here the first practical realization of such a cloak; in our demonstration, a copper cylinder was "hidden" inside a cloak constructed according to the previous theoretical prescription. The cloak was constructed with the use of artificially structured metamaterials, designed for operation over a band of microwave frequencies. The cloak decreased scattering from the hidden object while at the same time reducing its shadow, so that the cloak and object combined began to resemble empty space.
6,830 citations
TL;DR: This work presents the design of a non-magnetic cloak operating at optical frequencies, and the principle and structure of the proposed cylindrical cloak are analysed and the general recipe for the implementation of such a device is provided.
Abstract: Artificially structured metamaterials have enabled unprecedented flexibility in manipulating electromagnetic waves and producing new functionalities, including the cloak of invisibility based on coordinate transformation1,2,3. Unlike other cloaking approaches4,5,6, which are typically limited to subwavelength objects, the transformation method allows the design of cloaking devices that render a macroscopic object invisible. In addition, the design is not sensitive to the object that is being cloaked. The first experimental demonstration of such a cloak at microwave frequencies was recently reported7. We note, however, that that design7 cannot be implemented for an optical cloak, which is certainly of particular interest because optical frequencies are where the word ‘invisibility’ is conventionally defined. Here we present the design of a non-magnetic cloak operating at optical frequencies. The principle and structure of the proposed cylindrical cloak are analysed, and the general recipe for the implementation of such a device is provided.
1,953 citations
TL;DR: A new type of cloak is discussed: one that gives all cloaked objects the appearance of a flat conducting sheet that has the advantage that none of the parameters of the cloak is singular and can in fact be made isotropic.
Abstract: A new type of cloak is discussed: one that gives all cloaked objects the appearance of a flat conducting sheet. It has the advantage that none of the parameters of the cloak is singular and can in fact be made isotropic. It makes broadband cloaking in the optical frequencies one step closer.
1,419 citations
TL;DR: An experimental realization of a cloak design that conceals a perturbation on a flat conducting plane, under which an object can be hidden, and results indicate that this type of cloak should scale well toward optical wavelengths.
Abstract: The possibility of cloaking an object from detection by electromagnetic waves has recently become a topic of considerable interest. The design of a cloak uses transformation optics, in which a conformal coordinate transformation is applied to Maxwell's equations to obtain a spatially distributed set of constitutive parameters that define the cloak. Here, we present an experimental realization of a cloak design that conceals a perturbation on a flat conducting plane, under which an object can be hidden. To match the complex spatial distribution of the required constitutive parameters, we constructed a metamaterial consisting of thousands of elements, the geometry of each element determined by an automated design process. The ground-plane cloak can be realized with the use of nonresonant metamaterial elements, resulting in a structure having a broad operational bandwidth (covering the range of 13 to 16 gigahertz in our experiment) and exhibiting extremely low loss. Our experimental results indicate that this type of cloak should scale well toward optical wavelengths.
1,405 citations