Distinct Behaviors of Cu- And Ni-ZSM-5 Zeolites toward the Post-activation Reactions of Methane
09 Sep 2021-Journal of Physical Chemistry C (American Chemical Society (ACS))-Vol. 125, Iss: 35, pp 19333-19344
About: This article is published in Journal of Physical Chemistry C.The article was published on 2021-09-09 and is currently open access. It has received 4 citations till now.
Citations
More filters
TL;DR: In this article , the authors performed density functional theory (DFT) calculations to study the methane oxidation reaction on a pristine biphenylene network nanosheet to understand its catalytic property.
6 citations
TL;DR: In this paper , a set of density functional theory (DFT) calculations on the H-CH3 bond cleavage over the Cu-O-Cu active site in the MOR zeolite with various Al-pair arrangements were performed to obtain molecular insight into the structure-activity relation and clarify key parameters that define the reactivity toward CH4.
Abstract: Understanding the factors that influence the activity of a catalyst toward CH4 activation is of high importance for tuning the catalyst performance or designing new, better catalysts. Here, we performed a set of density functional theory (DFT) calculations on the H-CH3 bond cleavage over the Cu-O-Cu active site in the MOR zeolite with various Al-pair arrangements to obtain molecular insight into the structure-activity relation and clarify key parameters that define the Cu-O-Cu reactivity toward CH4. We found that weakening of the Cu-O-Cu bond during CH4 activation is crucial for determining the O-H bond strength and thus the Cu-O-Cu reactivity. In this regard, the zeolite lattice constraints are found to play a significant role as, on the one hand, it strengthens the Cu⋯Cu interaction and consequently weakens the Cu-O-Cu bonds and, on the other hand, it forces the Cu-O-Cu bond elongation process to destabilize the active site structure. The non-planar Cu-O-Cu geometry, due to lattice constraints, is also found to make the CH4 adsorption site, whether positioned closer to the μ-O or the Cu atom, crucial in determining the C-H activation product, i.e., a ˙CH3 radical or a Cu2-CH3- ligand.
4 citations
TL;DR: In this paper , an experimental and computational investigation of dry reforming of methane (DRM) was conducted in the presence of in situ sodium atoms in ZeoA, which increased the catalyst basicity and facilitated the CO 2 adsorption for activation.
Abstract: Experimental and computational investigations of dry reforming of methane (DRM) were conducted in this study. The experimented catalyst, NiOx/ZeoA, was synthesized via the functionalization of nickel salt with oxalate ligand to ensure the deposition of highly downsized Ni nanoparticles strongly interacting with the zeolite A support (ZeoA). The presence of in situ sodium atoms in ZeoA increased the catalyst basicity which facilitates the CO 2 adsorption for activation. The density of states computational result reveals the narrowing of the bandgap and the excitation of 3d electrons of Ni to the conduction band due to the isomorphic substitution of the Al and Si atoms with Ni atoms. The negative charges of the O atoms were found to decrease in intensity owing to the effect of Ni addition. This conferred high CO 2 and methane activation on the catalysts with high stability and resistance to carbon deposition during the DRM reaction. • Synthesis of oxalate ligand functionalized Ni catalysts. • Characterization and activity measurement of the synthesized catalyst. • Computational density of states investigation. • Correlation of the computational and experimental discoveries.
2 citations
TL;DR: In this article , the authors performed density functional theory calculations on graphitic MN4G-BN and showed that the addition of B doping adjacent to the Fe and Co centers as well as P doing adjacent to Cu center facilitates a facile O═O bond dissociation with an activation barrier of less than 0.4 eV, resulting in active M-O and inactive B/P-O sites.
Abstract: Graphene-based single-atom catalysts have attracted increasing interest due to their potential to catalyze the direct conversion of CH4 to CH3OH. In particular, the porphyrin-like FeN4 complex has recently been reported to convert CH4 to CH3OH at low temperatures with high selectivity. However, only N2O and H2O2, which are high-cost and scarce compared to O2, can be used as the oxidant of the reaction. In this paper, we perform density functional theory calculations on graphitic MN4G-BN (M = Fe, Co, Cu) and CuN4G-PN systems to evaluate the CH4 oxidation to CH3OH using O2. We found that the addition of B doping adjacent to the Fe and Co centers as well as P doing adjacent to the Cu center facilitates a facile O═O bond dissociation with an activation barrier of less than 0.4 eV, resulting in active M–O and inactive B/P–O sites. This low barrier is due to the early O═O bond elongation at the O2 adsorption step and the stability of the atomically adsorbed O atoms. In the subsequent CH4 oxidation, the resultant OCuN4G-OPN is found to be significantly more CH4-reactive than the OFeN4G-OBN and OCoN4G-OBN with a H–CH3 activation barrier of only 0.66 eV. Such high reactivity is due to the proximity of the electron-acceptor orbital (i.e., the Cu–O lowest unoccupied molecular orbital) toward the Fermi level. Moreover, the CH4 oxidation on CuN4G-PN is predicted to form CH3OH with high exothermicity and high resistance to overoxidation. This study suggests a high possibility for CuN4G-PN as a potential catalyst for the stepwise conversion of CH4 to CH3OH using O2 at low temperatures.
References
More filters
TL;DR: A simple derivation of a simple GGA is presented, in which all parameters (other than those in LSD) are fundamental constants, and only general features of the detailed construction underlying the Perdew-Wang 1991 (PW91) GGA are invoked.
Abstract: Generalized gradient approximations (GGA’s) for the exchange-correlation energy improve upon the local spin density (LSD) description of atoms, molecules, and solids. We present a simple derivation of a simple GGA, in which all parameters (other than those in LSD) are fundamental constants. Only general features of the detailed construction underlying the Perdew-Wang 1991 (PW91) GGA are invoked. Improvements over PW91 include an accurate description of the linear response of the uniform electron gas, correct behavior under uniform scaling, and a smoother potential. [S0031-9007(96)01479-2] PACS numbers: 71.15.Mb, 71.45.Gm Kohn-Sham density functional theory [1,2] is widely used for self-consistent-field electronic structure calculations of the ground-state properties of atoms, molecules, and solids. In this theory, only the exchange-correlation energy EXC › EX 1 EC as a functional of the electron spin densities n"srd and n#srd must be approximated. The most popular functionals have a form appropriate for slowly varying densities: the local spin density (LSD) approximation Z d 3 rn e unif
146,533 citations
TL;DR: An efficient scheme for calculating the Kohn-Sham ground state of metallic systems using pseudopotentials and a plane-wave basis set is presented and the application of Pulay's DIIS method to the iterative diagonalization of large matrices will be discussed.
Abstract: We present an efficient scheme for calculating the Kohn-Sham ground state of metallic systems using pseudopotentials and a plane-wave basis set. In the first part the application of Pulay's DIIS method (direct inversion in the iterative subspace) to the iterative diagonalization of large matrices will be discussed. Our approach is stable, reliable, and minimizes the number of order ${\mathit{N}}_{\mathrm{atoms}}^{3}$ operations. In the second part, we will discuss an efficient mixing scheme also based on Pulay's scheme. A special ``metric'' and a special ``preconditioning'' optimized for a plane-wave basis set will be introduced. Scaling of the method will be discussed in detail for non-self-consistent and self-consistent calculations. It will be shown that the number of iterations required to obtain a specific precision is almost independent of the system size. Altogether an order ${\mathit{N}}_{\mathrm{atoms}}^{2}$ scaling is found for systems containing up to 1000 electrons. If we take into account that the number of k points can be decreased linearly with the system size, the overall scaling can approach ${\mathit{N}}_{\mathrm{atoms}}$. We have implemented these algorithms within a powerful package called VASP (Vienna ab initio simulation package). The program and the techniques have been used successfully for a large number of different systems (liquid and amorphous semiconductors, liquid simple and transition metals, metallic and semiconducting surfaces, phonons in simple metals, transition metals, and semiconductors) and turned out to be very reliable. \textcopyright{} 1996 The American Physical Society.
81,985 citations
IBM1
TL;DR: An approach for electronic structure calculations is described that generalizes both the pseudopotential method and the linear augmented-plane-wave (LAPW) method in a natural way and can be used to treat first-row and transition-metal elements with affordable effort and provides access to the full wave function.
Abstract: An approach for electronic structure calculations is described that generalizes both the pseudopotential method and the linear augmented-plane-wave (LAPW) method in a natural way. The method allows high-quality first-principles molecular-dynamics calculations to be performed using the original fictitious Lagrangian approach of Car and Parrinello. Like the LAPW method it can be used to treat first-row and transition-metal elements with affordable effort and provides access to the full wave function. The augmentation procedure is generalized in that partial-wave expansions are not determined by the value and the derivative of the envelope function at some muffin-tin radius, but rather by the overlap with localized projector functions. The pseudopotential approach based on generalized separable pseudopotentials can be regained by a simple approximation.
61,450 citations
TL;DR: In this paper, the formal relationship between US Vanderbilt-type pseudopotentials and Blochl's projector augmented wave (PAW) method is derived and the Hamilton operator, the forces, and the stress tensor are derived for this modified PAW functional.
Abstract: The formal relationship between ultrasoft (US) Vanderbilt-type pseudopotentials and Bl\"ochl's projector augmented wave (PAW) method is derived. It is shown that the total energy functional for US pseudopotentials can be obtained by linearization of two terms in a slightly modified PAW total energy functional. The Hamilton operator, the forces, and the stress tensor are derived for this modified PAW functional. A simple way to implement the PAW method in existing plane-wave codes supporting US pseudopotentials is pointed out. In addition, critical tests are presented to compare the accuracy and efficiency of the PAW and the US pseudopotential method with relaxed core all electron methods. These tests include small molecules $({\mathrm{H}}_{2}{,\mathrm{}\mathrm{H}}_{2}{\mathrm{O},\mathrm{}\mathrm{Li}}_{2}{,\mathrm{}\mathrm{N}}_{2}{,\mathrm{}\mathrm{F}}_{2}{,\mathrm{}\mathrm{BF}}_{3}{,\mathrm{}\mathrm{SiF}}_{4})$ and several bulk systems (diamond, Si, V, Li, Ca, ${\mathrm{CaF}}_{2},$ Fe, Co, Ni). Particular attention is paid to the bulk properties and magnetic energies of Fe, Co, and Ni.
57,691 citations
TL;DR: A detailed description and comparison of algorithms for performing ab-initio quantum-mechanical calculations using pseudopotentials and a plane-wave basis set is presented in this article. But this is not a comparison of our algorithm with the one presented in this paper.
47,666 citations