Dynamical electric and magnetic metamaterial response at terahertz frequencies.
TL;DR: Utilizing terahertz time domain spectroscopy, the electromagnetic response of planar split ring resonators fabricated on GaAs is characterized and optical excitation is sufficient to turn off the electric resonance demonstrating the potential of SRR terAhertz switches.
Abstract: Utilizing terahertz time domain spectroscopy, we have characterized the electromagnetic response of a planar array of split ring resonators (SRRs) fabricated upon a high resistivity GaAs substrate. The measured frequency dependent magnetic and electric resonances are in excellent agreement with theory and simulation. For two polarizations, the SRRs yield a negative electric response ($ϵl0$). We demonstrate, for the first time, dynamical control of the electrical response of the SRRs through photoexcitation of free carriers in the substrate. An excited carrier density of $\ensuremath{\sim}4\ifmmode\times\else\texttimes\fi{}{10}^{16}\text{ }\text{ }{\mathrm{cm}}^{\ensuremath{-}3}$ is sufficient to short the gap of the SRRs, thereby turning off the electric resonance, demonstrating the potential of such structures as terahertz switches. Because of the universality of metamaterial response over many decades of frequency, these results have implications for other regions of the electromagnetic spectrum.
Citations
More filters
TL;DR: An overview of the status of the terahertz technology, its uses and its future prospects are presented in this article, with a focus on the use of the waveband in a wide range of applications.
Abstract: Research into terahertz technology is now receiving increasing attention around the world, and devices exploiting this waveband are set to become increasingly important in a very diverse range of applications. Here, an overview of the status of the technology, its uses and its future prospects are presented.
5,512 citations
TL;DR: In this paper, a review describes the recent progress made in creating nanostructured metamaterials with a negative index at optical wavelengths, and discusses some of the devices that could result from these new materials.
Abstract: Artificially engineered metamaterials are now demonstrating unprecedented electromagnetic properties that cannot be obtained with naturally occurring materials. In particular, they provide a route to creating materials that possess a negative refractive index and offer exciting new prospects for manipulating light. This review describes the recent progress made in creating nanostructured metamaterials with a negative index at optical wavelengths, and discusses some of the devices that could result from these new materials.
2,654 citations
Cites background from "Dynamical electric and magnetic met..."
...At low terahertz frequencies, tunability has already been demonstrated through the photo-excitation of free carriers in a GaAs substrat...
[...]
TL;DR: Bulk optical metamaterials open up prospects for studies of 3D optical effects and applications associated with NIMs and zero-index materials such as reversed Doppler effect, superlenses, optical tunnelling devices, compact resonators and highly directional sources.
Abstract: Metamaterials are artificially engineered structures that have properties, such as a negative refractive index, not attainable with naturally occurring materials. Negative-index metamaterials (NIMs) were first demonstrated for microwave frequencies, but it has been challenging to design NIMs for optical frequencies and they have so far been limited to optically thin samples because of significant fabrication challenges and strong energy dissipation in metals. Such thin structures are analogous to a monolayer of atoms, making it difficult to assign bulk properties such as the index of refraction. Negative refraction of surface plasmons was recently demonstrated but was confined to a two-dimensional waveguide. Three-dimensional (3D) optical metamaterials have come into focus recently, including the realization of negative refraction by using layered semiconductor metamaterials and a 3D magnetic metamaterial in the infrared frequencies; however, neither of these had a negative index of refraction. Here we report a 3D optical metamaterial having negative refractive index with a very high figure of merit of 3.5 (that is, low loss). This metamaterial is made of cascaded 'fishnet' structures, with a negative index existing over a broad spectral range. Moreover, it can readily be probed from free space, making it functional for optical devices. We construct a prism made of this optical NIM to demonstrate negative refractive index at optical frequencies, resulting unambiguously from the negative phase evolution of the wave propagating inside the metamaterial. Bulk optical metamaterials open up prospects for studies of 3D optical effects and applications associated with NIMs and zero-index materials such as reversed Doppler effect, superlenses, optical tunnelling devices, compact resonators and highly directional sources.
2,025 citations
TL;DR: An active metamaterial device capable of efficient real-time control and manipulation of terahertz radiation is demonstrated, which enables modulation of THz transmission by 50 per cent, an order of magnitude improvement over existing devices.
Abstract: Metamaterial structures are taught which provide for the modulation of terahertz frequency signals. Each element within an array of metamaterial (MM) elements comprises multiple loops and at least one gap. The MM elements may comprise resonators with conductive loops and insulated gaps, or the inverse in which insulated loops are present with conductive gaps; each providing useful transmissive control properties. The metamaterial elements are fabricated on a semiconducting substrate configured with a means of enhancing or depleting electrons from near the gaps of the MM elements. An on to off transmissivity ratio of about 0.5 is achieved with this approach. Embodiments are described in which the MM elements incorporated within a Quantum Cascade Laser (QCL) to provide surface emitting (SE) properties.
1,978 citations
TL;DR: Metamaterials are typically engineered by arranging a set of small scatterers or apertures in a regular array throughout a region of space, thus obtaining some desirable bulk electromagnetic behavior as mentioned in this paper.
Abstract: Metamaterials are typically engineered by arranging a set of small scatterers or apertures in a regular array throughout a region of space, thus obtaining some desirable bulk electromagnetic behavior. The desired property is often one that is not normally found naturally (negative refractive index, near-zero index, etc.). Over the past ten years, metamaterials have moved from being simply a theoretical concept to a field with developed and marketed applications. Three-dimensional metamaterials can be extended by arranging electrically small scatterers or holes into a two-dimensional pattern at a surface or interface. This surface version of a metamaterial has been given the name metasurface (the term metafilm has also been employed for certain structures). For many applications, metasurfaces can be used in place of metamaterials. Metasurfaces have the advantage of taking up less physical space than do full three-dimensional metamaterial structures; consequently, metasurfaces offer the possibility of less-lossy structures. In this overview paper, we discuss the theoretical basis by which metasurfaces should be characterized, and discuss their various applications. We will see how metasurfaces are distinguished from conventional frequency-selective surfaces. Metasurfaces have a wide range of potential applications in electromagnetics (ranging from low microwave to optical frequencies), including: (1) controllable “smart” surfaces, (2) miniaturized cavity resonators, (3) novel wave-guiding structures, (4) angular-independent surfaces, (5) absorbers, (6) biomedical devices, (7) terahertz switches, and (8) fluid-tunable frequency-agile materials, to name only a few. In this review, we will see that the development in recent years of such materials and/or surfaces is bringing us closer to realizing the exciting speculations made over one hundred years ago by the work of Lamb, Schuster, and Pocklington, and later by Mandel'shtam and Veselago.
1,819 citations
Cites background or result from "Dynamical electric and magnetic met..."
...Therefore, contrary to what has been asserted elsewhere in the literature [29-34], characterizing the metasurface as an effective medium in this way is inappropri ate and leads to misinterpretations....
[...]
...The use and application of metasurfaces from microwave to optical frequencies has achieved great popularity in recent years [24-82]....
[...]