Journal ArticleDOI
Effect of substitutional elements on hydrogen absorption properties in Mm-based AB5 alloys
N. Mani,Sundara Ramaprabhu +1 more
Reads0
Chats0
TLDR
In this paper, the authors studied the hydrogen absorption isotherms for the CaCu5 hexagonal structured alloys MmNi3.4, Mm Ni3.8Al 0.368Mn0.5Fe0.4Co 0.333V0.333Al0.3Fe0,4Fe 0.5Co 0,5Fe 0,6Al 0,7Al 0 0,8Al0 0.4Fe0 0,4Co0.About:
This article is published in Journal of Alloys and Compounds.The article was published on 2004-01-28. It has received 48 citations till now. The article focuses on the topics: Hydrogen & Hydrogen storage.read more
Citations
More filters
Journal ArticleDOI
Effect of substituting Mn for Ni on the hydrogen storage and electrochemical properties of ReNi2.6−xMnxCo0.9 alloys
TL;DR: VeVeziroglu et al. as mentioned in this paper investigated the effects of partially substituting Mn for Ni on the phase structure and electrochemical properties of the ReNi(2.6-x)Mn(x)Co(0.9) alloys.
Journal ArticleDOI
Influence of aluminium content on the dynamic characterstics of mischmetal based hydrogen storage alloys
TL;DR: In this article, the authors used the Arrhenius equation to calculate activation energies for reversible hydrogen storage at room temperature with nominal supply pressure and fast kinetics under dynamic operating conditions.
Journal ArticleDOI
Structural and hydrogen absorption kinetics studies of polymer dispersed and boron added Zr-based AB2 alloy
TL;DR: In this paper, boron added alloys have been prepared and dispersion of polyaniline (PANI) has been performed on ZrMn 0.85 Cr 0.1 V 0.05 Fe 0.5 Ni 0.
Journal ArticleDOI
Properties of La0.2Y0.8Ni5−xMnx alloys for high-pressure hydrogen compressor
TL;DR: In this article, Veziroglu et al. investigated the absorption/desorption properties of two alloys, La(0.2)Y (0.8)Ni(5-x)Mn(x) (x = 0.3, 0.4), for high-pressure hydrogen compression application and found that Mn could lower the plateau pressure effectively, improve the hydrogen storage capacity and absorption kinetics but slightly increase the slope of the pressure plateau and hysteresis.
Journal ArticleDOI
Study of electrochemical performances of perovskite-type oxide LaGaO3 for application as a novel anode material for Ni-MH secondary batteries
TL;DR: In this article, the perovskite-type oxide LaGaO 3, which is proposed as a novel anode material for Ni-MH secondary batteries, was synthesized by the sol-gel method.
References
More filters
Journal ArticleDOI
Advances in chemistry series
TL;DR: A key to pharmaceutical and medicinal chemistry literature and training of literature chemists are discussed in the Advances series as mentioned in this paper, with the focus on the training of chemistry chemists, which is a subject of great interest to the literature chemist.
Journal ArticleDOI
An investigation on the structural and electrochemical properties of La0.7Mg0.3(Ni0.85Co0.15)x (x=3.15–3.80) hydrogen storage electrode alloys
TL;DR: In this paper, the structural and electrochemical properties of the La0.7Mg0.3(Ni0.85Co0.15)x (x=3.15, 3.30), 3.65,3.50, and 3.80) hydrogen storage electrode alloys have been studied systematically.
Journal ArticleDOI
Hydrogen absorption and its effect on the magnetic properties of rare-earth iron intermetallics
TL;DR: In this paper, the magnetic properties of the hydrides were determined and compared with the original compounds and it was shown that the magnetic moment per Fe atom is much larger in hydride phases.
Journal ArticleDOI
Hydrogen absorption-desorption characteristics of MmNiAlM and MmNiMnM alloys (Mm misch metal)
TL;DR: In this paper, the authors studied the hydrogen absorption-desorption characteristics of multicomponent alloys such as MmNi5−xAl(Mn)y−zMz and MnNi5 −xMnyM2.
Journal ArticleDOI
Hydrogen absorption-desorption characteristics of mischmetal-nickel-aluminum alloys
TL;DR: The hydrogen absorption and desorption characteristics of mischmetal (Mm)-nickel-aluminum alloys were investigated in this paper, where the same hexagonal structure as LaNi5 and MmNi5 was found to react readily with hydrogen to form the hydrides MnNi4.5Al0.75 Al0.5A10.