Electronic Structures of Semiconductor Alloys
TL;DR: In this paper, the problem of the band structure of semiconductor alloy systems is treated by both the dielectric two-band method and by the use of an empirical (local) pseudopotential.
Abstract: The problem of the band structure of semiconductor alloy systems is treated by both the dielectric two-band method and by the use of an empirical (local) pseudopotential. With both methods, calculations are made in the virtual-crystal approximation assuming linear dependence on alloy concentration of the lattice constant and the parameters of the two methods. Contrary to some previous assertions, both methods predict, in general, a nonlinear dependence of the interband gaps on concentration. An estimate is also made of the effects of second-order perturbations to the virtual-crystal approximation, i.e., the effect of disorder. Of particular interest are the lowest direct and indirect energy gaps and the deviations of these from linearity. The treatment is confined to alloys of compounds having the formula ${A}^{N}{B}^{8\ensuremath{-}N}$, but quaternary and more complicated alloys may be treated as easily as the ternary alloys to which most previous experimental work has been confined. Results are compared to experiment and to the empirical formula of Thompson and Woolley. We find that, with one free parameter, the dielectric method gives good agreement with experiment, but that the local-pseudopotential method apparently does not yield satisfactory results for this problem.
Citations
More filters
TL;DR: The semiconductor ZnO has gained substantial interest in the research community in part because of its large exciton binding energy (60meV) which could lead to lasing action based on exciton recombination even above room temperature.
Abstract: The semiconductor ZnO has gained substantial interest in the research community in part because of its large exciton binding energy (60meV) which could lead to lasing action based on exciton recombination even above room temperature. Even though research focusing on ZnO goes back many decades, the renewed interest is fueled by availability of high-quality substrates and reports of p-type conduction and ferromagnetic behavior when doped with transitions metals, both of which remain controversial. It is this renewed interest in ZnO which forms the basis of this review. As mentioned already, ZnO is not new to the semiconductor field, with studies of its lattice parameter dating back to 1935 by Bunn [Proc. Phys. Soc. London 47, 836 (1935)], studies of its vibrational properties with Raman scattering in 1966 by Damen et al. [Phys. Rev. 142, 570 (1966)], detailed optical studies in 1954 by Mollwo [Z. Angew. Phys. 6, 257 (1954)], and its growth by chemical-vapor transport in 1970 by Galli and Coker [Appl. Phys. ...
10,260 citations
TL;DR: In this article, the authors present a comprehensive, up-to-date compilation of band parameters for the technologically important III-V zinc blende and wurtzite compound semiconductors.
Abstract: We present a comprehensive, up-to-date compilation of band parameters for the technologically important III–V zinc blende and wurtzite compound semiconductors: GaAs, GaSb, GaP, GaN, AlAs, AlSb, AlP, AlN, InAs, InSb, InP, and InN, along with their ternary and quaternary alloys. Based on a review of the existing literature, complete and consistent parameter sets are given for all materials. Emphasizing the quantities required for band structure calculations, we tabulate the direct and indirect energy gaps, spin-orbit, and crystal-field splittings, alloy bowing parameters, effective masses for electrons, heavy, light, and split-off holes, Luttinger parameters, interband momentum matrix elements, and deformation potentials, including temperature and alloy-composition dependences where available. Heterostructure band offsets are also given, on an absolute scale that allows any material to be aligned relative to any other.
6,349 citations
TL;DR: In this article, a review of the properties of the Al x Ga1−x As/GaAs heterostructure system is presented, which can be classified into sixteen groups: (1) lattice constant and crystal density, (2) melting point, (3) thermal expansion coefficient, (4), lattice dynamic properties, (5) lattices thermal properties,(6) electronic-band structure, (7) external perturbation effects on the bandgap energy, (8) effective mass, (9) deformation potential, (10) static and
Abstract: The Al x Ga1−x As/GaAs heterostructure system is potentially useful material for high‐speed digital, high‐frequency microwave, and electro‐optic device applications Even though the basic Al x Ga1−x As/GaAs heterostructure concepts are understood at this time, some practical device parameters in this system have been hampered by a lack of definite knowledge of many material parameters Recently, Blakemore has presented numerical and graphical information about many of the physical and electronic properties of GaAs [J S Blakemore, J Appl Phys 5 3, R123 (1982)] The purpose of this review is (i) to obtain and clarify all the various material parameters of Al x Ga1−x As alloy from a systematic point of view, and (ii) to present key properties of the material parameters for a variety of research works and device applications A complete set of material parameters are considered in this review for GaAs, AlAs, and Al x Ga1−x As alloys The model used is based on an interpolation scheme and, therefore, necessitates known values of the parameters for the related binaries (GaAs and AlAs) The material parameters and properties considered in the present review can be classified into sixteen groups: (1) lattice constant and crystal density, (2) melting point, (3) thermal expansion coefficient, (4) lattice dynamic properties, (5) lattice thermal properties, (6) electronic‐band structure, (7) external perturbation effects on the band‐gap energy, (8) effective mass, (9) deformation potential, (10) static and high‐frequency dielectric constants, (11) magnetic susceptibility, (12) piezoelectric constant, (13) Frohlich coupling parameter, (14) electron transport properties, (15) optical properties, and (16) photoelastic properties Of particular interest is the deviation of material parameters from linearity with respect to the AlAs mole fraction x Some material parameters, such as lattice constant, crystal density, thermal expansion coefficient, dielectric constant, and elastic constant, obey Vegard’s rule well Other parameters, eg, electronic‐band energy, lattice vibration (phonon) energy, Debye temperature, and impurity ionization energy, exhibit quadratic dependence upon the AlAs mole fraction However, some kinds of the material parameters, eg, lattice thermal conductivity, exhibit very strong nonlinearity with respect to x, which arises from the effects of alloy disorder It is found that the present model provides generally acceptable parameters in good agreement with the existing experimental data A detailed discussion is also given of the acceptability of such interpolated parameters from an aspect of solid‐state physics Key properties of the material parameters for use in research work and a variety of Al x Ga1−x As/GaAs device applications are also discussed in detail
2,671 citations
TL;DR: This paper presents a meta-modelling system that automates the very labor-intensive and therefore time-heavy and expensive and therefore expensive and expensive process of designing and installing solar panels.
Abstract: Graham H. Carey,† Ahmed L. Abdelhady,‡ Zhijun Ning, Susanna M. Thon, Osman M. Bakr,‡ and Edward H. Sargent*,† †Department of Electrical and Computer Engineering, University of Toronto, 10 King’s College Road, Toronto, Ontario M5S 3G4, Canada ‡Division of Physical Sciences and Engineering, Solar & Photovoltaics Engineering Center, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia School of Physical Science and Technology, ShanghaiTech University, 100 Haike Road, Shanghai 201210, China Department of Electrical and Computer Engineering, Johns Hopkins University, 3400 North Charles Street, Baltimore, Maryland 21218, United States
1,036 citations
TL;DR: A comprehensive review of the material properties of cadmium zinc telluride (CZT, Cd1ˇxZnxTe) with zinc content xa 0:1−0.2 is presented in this paper.
Abstract: We present a comprehensive review of the material properties of cadmium zinc telluride (CZT, Cd1ˇxZnxTe) with zinc content xa 0:1‐0.2. Particular emphasis is placed on those aspects of this material related to room temperature nuclear detectors. A review of the structural properties, charge transport, and contacting issues and how these are related to detector and spectrometer performance is presented. A comprehensive literature survey and bibliography are also included. # 2001 Elsevier Science B.V. All rights reserved.
771 citations