scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Entropy Generation During Natural Convection in a Porous Cavity: Effect of Thermal Boundary Conditions

02 Aug 2012-Numerical Heat Transfer Part A-applications (Taylor & Francis Group)-Vol. 62, Iss: 4, pp 336-364
TL;DR: In this article, the authors investigated the effect of different boundary conditions on entropy generation, and showed that the entropy generation rates are reduced in sinusoidal heating (case 2) when compared to that for uniform heating with a penalty on thermal mixing, and that there exists an intermediate Da for optimal values of entropy generation.
Abstract: Entropy generation plays a significant role in the overall efficiency of a given system, and a judicious choice of optimal boundary conditions can be made based on a knowledge of entropy generation. Five different boundary conditions are considered and their effect of the permeability of the porous medium, heat transfer regime (conduction and convection) on entropy generation due to heat transfer, and fluid friction irreversibilities are investigated in detail for molten metals (Pr = 0.026) and aqueous solutions (Pr = 10), with Darcy numbers (Da) between 10−5–10−3 and at a representative high Rayleigh number, Ra = 5 × 105. It is observed that the entropy generation rates are reduced in sinusoidal heating (case 2) when compared to that for uniform heating (case 1), with a penalty on thermal mixing. Finally, the analysis of total entropy generation due to variation in Da and thermal mixing and temperature uniformity indicates that, there exists an intermediate Da for optimal values of entropy generation, th...
Citations
More filters
Book ChapterDOI
01 Jan 1997
TL;DR: This chapter introduces the finite element method (FEM) as a tool for solution of classical electromagnetic problems and discusses the main points in the application to electromagnetic design, including formulation and implementation.
Abstract: This chapter introduces the finite element method (FEM) as a tool for solution of classical electromagnetic problems. Although we discuss the main points in the application of the finite element method to electromagnetic design, including formulation and implementation, those who seek deeper understanding of the finite element method should consult some of the works listed in the bibliography section.

1,820 citations

Journal ArticleDOI
TL;DR: In this paper, the authors investigated the entropy generation due to conjugate natural convection-conduction heat transfer in a square domain under steady-state condition, and the results showed that both the average Nusselt number and entropy generation are increasing functions of K ro while they are maxima at some critical values of D.
Abstract: Entropy generation due to conjugate natural convection–conduction heat transfer in a square domain is numerically investigated under steady-state condition. The domain composed of porous cavity heated by a triangular solid wall and saturated with a CuO–water nanofluid. Equations governing the heat transfer in the triangular solid together with the heat and nanofluid flow in the nanofluid-saturated porous medium are solved numerically using the over-successive relaxation finite-difference method. A temperature dependent thermal conductivity and modified expression for the thermal expansion of nanofluid are adopted. A new criterion for assessment of the thermal performance is proposed. The investigated parameters are the nanoparticles volume fraction φ (0–0.05), modified Rayleigh number Ra (10–1000), solid wall to base-fluid saturated porous medium thermal conductivity ratio K ro (0.44, 1, 23.8), and the triangular solid thickness D (0.1–1). The results show that both the average Nusselt number and the entropy generation are increasing functions of K ro , while they are maxima at some critical values of D . It is also found that the addition of nanoparticles increases the entropy generation. According to the new proposed criterion, the results show that the largest solid thickness ( D = 1.0) and the lower wall thermal conductivity ratio manifest better thermal performance.

142 citations

Journal ArticleDOI
TL;DR: In this article, the entropy generation in natural convection of nanofluid in a wavy cavity using a single-phase model was analyzed using the finite difference method of the second-order accuracy.
Abstract: Purpose The main purpose of this numerical study is to study on entropy generation in natural convection of nanofluid in a wavy cavity using a single-phase nanofluid model. Design/methodology/approach The cavity is heated non-uniformly from the wavy wall and cooled from the right side while it is insulated from the horizontal walls. The physical domain of the problem is transformed into a rectangular geometry in the computational domain using an algebraic coordinate transformation by introducing new independent variables ξ and η. The governing dimensionless partial differential equations with corresponding initially and boundary conditions were numerically solved by the finite difference method of the second-order accuracy. The governing parameters are Rayleigh number (Ra = 1000-100000), Prandtl number (Pr = 6.82), solid volume fraction parameter of nanoparticles (φ = 0.0-0.05), aspect ratio parameter (A = 1), undulation number (κ = 1-3), wavy contraction ratio (b = 0.1-0.3) and dimensionless time (τ = 0-0.27). Findings It is found that the average Bejan number is an increasing function of nanoparticle volume fraction and a decreasing function of the Rayleigh number, undulation number and wavy contraction ratio. Also, an insertion of nanoparticles leads to an attenuation of convective flow and enhancement of heat transfer. Originality The originality of this work is to analyze the entropy generation in natural convection within a wavy nanofluid cavity using single-phase nanofluid model. The results would benefit scientists and engineers to become familiar with the flow behaviour of such nanofluids, and will be a way to predict the properties of this flow for the possibility of using nanofluids in advanced nuclear systems, in industrial sectors including transportation, power generation, chemical sectors, ventilation, air-conditioning, etc.

128 citations

Journal ArticleDOI
05 Feb 2016-Entropy
TL;DR: It is found that the applied magnetic field can suppress both the natural convection and the entropy generation rate, and the nanoparticles addition can be useful if a compromised magnetic field value represented by a Hartman number of 30 is applied.
Abstract: This paper investigates the entropy generation and natural convection inside a C-shaped cavity filled with CuO-water nanofluid and subjected to a uniform magnetic field. The Brownian motion effect is considered in predicting the nanofluid properties. The governing equations are solved using the finite volume method with the SIMPLE (Semi-Implicit Method for Pressure Linked Equations) algorithm. The studied parameters are the Rayleigh number (1000 ≤ Ra ≤ 15,000), Hartman number (0 ≤ Ha ≤ 45), nanofluid volume fraction (0 ≤ φ ≤ 0.06), and the cavity aspect ratio (0.1 ≤ AR ≤ 0.7). The results have shown that the nanoparticles volume fraction enhances the natural convection but undesirably increases the entropy generation rate. It is also found that the applied magnetic field can suppress both the natural convection and the entropy generation rate, where for Ra = 1000 and φ = 0.04, the percentage reductions in total entropy generation decreases from 96.27% to 48.17% for Ha = 45 compared to zero magnetic field when the aspect ratio is increased from 0.1 to 0.7. The results of performance criterion have shown that the nanoparticles addition can be useful if a compromised magnetic field value represented by a Hartman number of 30 is applied.

120 citations

Journal ArticleDOI
TL;DR: In this paper, a numerical study is made on the mixed convection of copper-water nanofluid inside a differentially heated skew enclosure, where the finite volume based SIMPLEC algorithm is used to solve the transformed equations for fluid flow and heat transfer equations in the computational domain.

76 citations

References
More filters
Journal ArticleDOI
TL;DR: Forced convection with viscous dissipation in a parallel plate channel filled by a saturated porous medium is investigated numerically in this article, where three different viscous Dissipation models are examined.
Abstract: Forced convection with viscous dissipation in a parallel plate channel filled by a saturated porous medium is investigated numerically. Three different viscous dissipation models are examined. Two different sets of wall conditions are considered: isothermal and isoflux. Analytical expressions are also presented for the asymptotic temperature profile and the asymptotic Nusselt number. With isothermal walls, the Brinkman number significantly influences the developing Nusselt number but not the asymptotic one. At constant wall heat flux, both the developing and the asymptotic Nusselt numbers are affected by the value of the Brinkman number. The Nusselt number is sensitive to the porous medium shape factor under all conditions considered.

85 citations


"Entropy Generation During Natural C..." refers background in this paper

  • ...In a recent study, Hooman and Gurgenci [44] compared three different viscous dissipation models and concluded that the three models are effectively the same at low values of Da, but for higher limits of Da only the model of Al-Hadhrami et al. [43] is valid....

    [...]

  • ...In a recent study, Hooman and Gurgenci [44] compared three different viscous dissipation models and concluded that the three models are effectively the same at low values of Da, but for higher limits of Da only the model of Al-Hadhrami et al....

    [...]

Journal ArticleDOI
01 Aug 1995-Fuel
TL;DR: In this article, the authors present a review of the laboratory combustion performance of different heavy oil and oil sand reservoir samples, and discuss the field performance of some of the in situ combustion projects which have been or continue to operate in Canada.

84 citations


"Entropy Generation During Natural C..." refers background in this paper

  • ...flooding in porous beds [16], combustion of heavy oils in porous reservoirs [17, 18], etc....

    [...]

Journal ArticleDOI
TL;DR: In this paper, entropy generation due to heat transfer irreversibility (HTI) and fluid friction irreversability (FFI) was calculated from its definition using dependent variables of velocities and temperature fields.

83 citations


"Entropy Generation During Natural C..." refers background or result in this paper

  • ...The current approach offers a special advantage over finite difference or finite volume solutions [33, 35], where derivatives are calculated using some interpolation functions which are avoided in the current work, and elemental basis sets (defined by Eq....

    [...]

  • ...Similar studies on entropy generation during natural convection in enclosures where viscous dissipation term is omitted in the energy equation have been reported earlier [33, 35]....

    [...]

  • ...A similar value of / was considered by earlier researchers [35]....

    [...]

  • ...[35] have numerically studied entropy generation due to natural convection in nonuniformly heated porous isosceles triangular enclosure positioned at various inclinations, and they concluded that the highest entropy generation due to heat transfer and fluid friction is observed at /1⁄4 90 ....

    [...]

Journal ArticleDOI
TL;DR: In this article, a numerical study of double-diffusive convective flow of a binary mixture in a porous enclosure subject to localized heating and salting from one side is presented.

82 citations