Journal ArticleDOI
Exploring a hybrid manufacturing process to develop high performance age hardenable ultrafine grained AA6063/SiC nano-composite sheets
Reads0
Chats0
TLDR
In this paper, a hybrid manufacturing process consisting of cryorolling (CR) followed by warm rolling (WR) was established to develop high performance AA6063/SiC nano-composite sheets.About:
This article is published in Journal of Manufacturing Processes.The article was published on 2021-10-01. It has received 3 citations till now. The article focuses on the topics: Strain hardening exponent & Precipitation hardening.read more
Citations
More filters
Journal ArticleDOI
Tribological Behavior on Stir-Casted Metal Matrix Composites of Al8011 and Nano Boron Carbide Particles
N. Vinayaka,K. G. Jaya Christiyan,Sarange Shreepad,Suvendu Padhi,Sunil Dambhare,Ranjit kumar Puse,K. Gayathri,Aniket Kolekar,Sucheta Nagarajan +8 more
TL;DR: In this article , a major attempt was made on the nano-based composites with aluminum alloy utilization, and the aluminum alloy AA8011 and the ceramic-based reinforcement particles of nano boron carbide (B4C) were selected for producing the metal matrix composites by the liquefying process or stir casting route.
Journal ArticleDOI
Synthesis and characterization of natural fibre with ZnO nanocomposites
Y. Brucely,Y. Christabel Shaji,G. Paulraj,D. Manikandan,N. Nagaprasad,Rajesh Singh,Lovi Raj Gupta,Jule Leta Tesfaye,Bayissa Badada Badassa,R. Krishnaraj +9 more
Journal ArticleDOI
Effect of friction stir processing on microstructural evolution and mechanical properties of nanosized SiC reinforced AA5083 nanocomposites developed by stir casting
TL;DR: In this paper , a fine grained AA5083 alloy-based nanocomposites with uniform dispersion of nanosize SiC particles through stir casting followed by microstructural modification using friction stir processing (FSP).
References
More filters
Journal ArticleDOI
Investigation of microstructure and mechanical properties of Al6061-nanocomposite fabricated by stir casting
TL;DR: In this paper, the effects of adding nano-alumina particles to Al6061 alloy and extrusion process on the mechanical and microstructure properties of the composites were investigated.
Journal ArticleDOI
A review on fabrication methods, reinforcements and mechanical properties of aluminum matrix composites
TL;DR: In this paper, the authors present an overview on the available fabrication routes, reinforcement materials, pertinent research issues and challenges in production of fabricated aluminium matrix composites, and special attention is focused on the mechanical properties of fabricated ALM composites.
Journal ArticleDOI
A novel technique for development of A356/Al2O3 surface nanocomposite by friction stir processing
TL;DR: A356/Al 2 O 3 surface nanocomposite was produced by friction stir processing (FSP) method as mentioned in this paper, and X-ray diffractometery, optical and scanning electron microscopy, microhardness and nanoindentation tests were used to characterize the samples.
Journal ArticleDOI
Friction stir processing of Al/SiC composites fabricated by powder metallurgy
TL;DR: Friction stir processing (FSP) was applied to modify the microstructure of sintered Al-SiC composites with particle concentrations ranging from 4 to 16vol.
Journal ArticleDOI
Optimization of processing parameters for the Al + 10% B4C system obtained by mechanical alloying
TL;DR: In this article, the processing parameters of the Al+10% B 4 C system have been studied and the mechanical alloying process optimization has been carried out in a planetary ball mill up to 12h.