Functional polymer–clay nanotube composites with sustained release of chemical agents
TL;DR: Halloysite is a biocompatible material and its simple processing combined with low cost make it a perspective additive for polymeric biocomposites as mentioned in this paper, however, these tubes have smaller diameter and much lower loading capacity for macromolecules.
About: This article is published in Progress in Polymer Science.The article was published on 2013-10-01. It has received 469 citations till now. The article focuses on the topics: Halloysite & Polymer clay.
Citations
More filters
TL;DR: Halloysite nanotubes are a promising mesoporous media for catalytic nanoparticles that may be seeded on the tube surface or synthesized exclusively in the lumens, providing enhanced catalytic properties, especially at high temperatures.
Abstract: Halloysite is an alumosilicate tubular clay with a diameter of 50 nm, an inner lumen of 15 nm and a length of 600-900 nm. It is a natural biocompatible nanomaterial available in thousands of tons at low price, which makes it a good candidate for nanoarchitectural composites. The inner lumen of halloysite may be adjusted by etching to 20-30% of the tube volume and loading with functional agents (antioxidants, anticorrosion agents, flame-retardant agents, drugs, or proteins) allowing for formulations with sustained release tuned by the tube end-stoppers for hours and days. Clogging the tube ends in polymeric composites allows further extension of the release time. Thus, antioxidant-loaded halloysite doped into rubber enhances anti-aging properties for at least 12 months. The addition of 3-5 wt% of halloysite increases the strength of polymeric materials, and the possibility of the tube's orientation promises a gradient of properties. Halloysite nanotubes are a promising mesoporous media for catalytic nanoparticles that may be seeded on the tube surface or synthesized exclusively in the lumens, providing enhanced catalytic properties, especially at high temperatures. In vitro and in vivo studies on biological cells and worms indicate the safety of halloysite, and tests for efficient adsorption of mycotoxins in animals' stomachs are also carried out.
736 citations
TL;DR: Halloysite nanotubes (HNTs) have been used extensively in polymer nanocomposites as mentioned in this paper, where they have shown high tensile and flexural strength, elastic moduli, and improved toughness.
722 citations
TL;DR: In this paper, a detailed study of the self-healing properties of different kinds of polymer nanocomposites utilizing a number of healing mechanisms, including the addition of several healing agents.
510 citations
Cites background from "Functional polymer–clay nanotube co..."
...These publications reported on self-healing chemistries in different kinds of materials, including thermoplastic polymers, thermoset polymers, elastomers, shape memory polymers, supramolecular polymers, polymer composites, nanocomposites, and coatings [7-12]....
[...]
TL;DR: A comprehensive review of the state of the art of bone biomaterials and their interactions with stem cells is presented and the promising seed stem cells for bone repair are summarized, and their interaction mechanisms are discussed in detail.
Abstract: Bone biomaterials play a vital role in bone repair by providing the necessary substrate for cell adhesion, proliferation, and differentiation and by modulating cell activity and function. In past decades, extensive efforts have been devoted to developing bone biomaterials with a focus on the following issues: (1) developing ideal biomaterials with a combination of suitable biological and mechanical properties; (2) constructing a cell microenvironment with pores ranging in size from nanoscale to submicro- and microscale; and (3) inducing the oriented differentiation of stem cells for artificial-to-biological transformation. Here we present a comprehensive review of the state of the art of bone biomaterials and their interactions with stem cells. Typical bone biomaterials that have been developed, including bioactive ceramics, biodegradable polymers, and biodegradable metals, are reviewed, with an emphasis on their characteristics and applications. The necessary porous structure of bone biomaterials for the cell microenvironment is discussed, along with the corresponding fabrication methods. Additionally, the promising seed stem cells for bone repair are summarized, and their interaction mechanisms with bone biomaterials are discussed in detail. Special attention has been paid to the signaling pathways involved in the focal adhesion and osteogenic differentiation of stem cells on bone biomaterials. Finally, achievements regarding bone biomaterials are summarized, and future research directions are proposed.
464 citations
TL;DR: This paper reviews individualized HNT addition along with crosslinking of PVA for various biomedical applications that have been previously reported in literature, thereby showing the attainability, modification of characteristics, and goals underlying the blending process with PVA.
Abstract: The aim of this review was to analyze/investigate the synthesis, properties, and applications of polyvinyl alcohol-halloysite nanotubes (PVA-HNT), and their nanocomposites. Different polymers with versatile properties are attractive because of their introduction and potential uses in many fields. Synthetic polymers, such as PVA, natural polymers like alginate, starch, chitosan, or any material with these components have prominent status as important and degradable materials with biocompatibility properties. These materials have been developed in the 1980s and are remarkable because of their recyclability and consideration of the natural continuation of their physical and chemical properties. The fabrication of PVA-HNT nanocomposites can be a potential way to address some of PVA's limitations. Such nanocomposites have excellent mechanical properties and thermal stability. PVA-HNT nanocomposites have been reported earlier, but without proper HNT individualization and PVA modifications. The properties of PVA-HNT for medicinal and biomedical use are attracting an increasing amount of attention for medical applications, such as wound dressings, drug delivery, targeted-tissue transportation systems, and soft biomaterial implants. The demand for alternative polymeric medical devices has also increased substantially around the world. This paper reviews individualized HNT addition along with crosslinking of PVA for various biomedical applications that have been previously reported in literature, thereby showing the attainability, modification of characteristics, and goals underlying the blending process with PVA.
455 citations
Cites background from "Functional polymer–clay nanotube co..."
...Uses of PVA and HNTs in non-implant and implantable devices [26,52]....
[...]
...2 Non-swelling [51,52] Hydrogels exhibit swelling feature in water with the peculiar characteristics of retaining water within its matrix without dissolving [50]....
[...]
...1 Natural, nontoxic [51,52] Non-toxic [48,49]...
[...]
...3 Compatibility polymers oriented, such as polypropylene and polyethylene [51,52] PVA is more biologically compatible [48,49]...
[...]
...Several research groups have investigated the application of nanotechnology in PVA, and they have reported their hydrogel preparation based on organically modified montmorillonite and studied their potential use as the main wound dressing devices in vitro [52,74] and in vivo [75] environments....
[...]
References
More filters
TL;DR: A review of the academic and industrial aspects of the preparation, characterization, materials properties, crystallization behavior, melt rheology, and processing of polymer/layered silicate nanocomposites is given in this article.
6,343 citations
TL;DR: A review of the progress in the area of mechanical reinforcement of polymers using carbon nanotubes can be found in this paper, where the main methods described in the literature to produce and process polymer-nanotube composites are considered and analyzed.
Abstract: Owing to their unique mechanical properties, carbon nanotubes are considered to be ideal candidates for polymer reinforcement. However, a large amount of work must be done in order to realize their full potential. Effective processing of nanotubes and polymers to fabricate new ultra-strong composite materials is still a great challenge. This Review explores the progress that has already been made in the area of mechanical reinforcement of polymers using carbon nanotubes. First, the mechanical properties of carbon nanotubes and the system requirements to maximize reinforcement are discussed. Then, main methods described in the literature to produce and process polymer–nanotube composites are considered and analyzed. After that, mechanical properties of various nanotube–polymer composites prepared by different techniques are critically analyzed and compared. Finally, remaining problems, the achievements so far, and the research that needs to be done in the future are discussed.
1,557 citations
TL;DR: Electrospun fiber mats are explored as drug delivery vehicles using tetracycline hydrochloride as a model drug to compare to a commercially available drug delivery system and to cast films of the various formulations.
1,244 citations
1,230 citations
TL;DR: It is speculated that exposure to combustion-generated MWCNTs in fine PM may play a significant role in air pollution-related cardiopulmonary diseases by pollutants, and the possible mechanisms of CNT pathogenesis in the lung and the impact of residual metals and other impurities on the toxicological manifestations are presented.
Abstract: Nanotechnology has emerged at the forefront of science research and technology development. Carbon nanotubes (CNTs) are major building blocks of this new technology. They possess unique electrical, mechanical, and thermal properties, with potential wide applications in the electronics, computer, aerospace, and other industries. CNTs exist in two forms, single-wall (SWCNTs) and multi-wall (MWCNTs). They are manufactured predominately by electrical arc discharge, laser ablation and chemical vapor deposition processes; these processes involve thermally stripping carbon atoms off from carbon-bearing compounds. SWCNT formation requires catalytic metals. There has been a great concern that if CNTs, which are very light, enter the working environment as suspended particulate matter (PM) of respirable sizes, they could pose an occupational inhalation exposure hazard. Very recently, MWCNTs and other carbonaceous nanoparticles in fine (<2.5 microm) PM aggregates have been found in combustion streams of methane, propane, and natural-gas flames of typical stoves; indoor and outdoor fine PM samples were reported to contain significant fractions of MWCNTs. Here we review several rodent studies in which test dusts were administered intratracheally or intrapharyngeally to assess the pulmonary toxicity of manufactured CNTs, and a few in vitro studies to assess biomarkers of toxicity released in CNT-treated skin cell cultures. The results of the rodent studies collectively showed that regardless of the process by which CNTs were synthesized and the types and amounts of metals they contained, CNTs were capable of producing inflammation, epithelioid granulomas (microscopic nodules), fibrosis, and biochemical/toxicological changes in the lungs. Comparative toxicity studies in which mice were given equal weights of test materials showed that SWCNTs were more toxic than quartz, which is considered a serious occupational health hazard if it is chronically inhaled; ultrafine carbon black was shown to produce minimal lung responses. The differences in opinions of the investigators about the potential hazards of exposures to CNTs are discussed here. Presented here are also the possible mechanisms of CNT pathogenesis in the lung and the impact of residual metals and other impurities on the toxicological manifestations. The toxicological hazard assessment of potential human exposures to airborne CNTs and occupational exposure limits for these novel compounds are discussed in detail. Environmental fine PM is known to form mainly from combustion of fuels, and has been reported to be a major contributor to the induction of cardiopulmonary diseases by pollutants. Given that manufactured SWCNTs and MWCNTs were found to elicit pathological changes in the lungs, and SWCNTs (administered to the lungs of mice) were further shown to produce respiratory function impairments, retard bacterial clearance after bacterial inoculation, damage the mitochondrial DNA in aorta, increase the percent of aortic plaque, and induce atherosclerotic lesions in the brachiocephalic artery of the heart, it is speculated that exposure to combustion-generated MWCNTs in fine PM may play a significant role in air pollution-related cardiopulmonary diseases. Therefore, CNTs from manufactured and combustion sources in the environment could have adverse effects on human health.
1,204 citations