scispace - formally typeset
Search or ask a question
Journal ArticleDOI

GaN nanocrystals obtained by Ga and N implantations and thermal treatment under N2 into SiO2/Si and SiNx/Si wafers

TL;DR: In this article, the formation of GaN nanocrystals in SiO2/Si and SiNx/Si dielectric layers implanted with Ga+and N+ions, followed by annealing at 950°C for 60-120min in N2, has been studied by high resolution transmission electron microscopy (HRTEM), synchrotron radiation X-ray diffraction (XRD), XAFS) technique at the Ga K-edge, as well as by Rutherford Backscattering spectrometry (RBS), X-Ray photoelectron
Abstract: The formation of GaN nanocrystals in SiO2/Si and SiNx/Si dielectric layers implanted with Ga + and N + ions, followed by annealing at 950 °C for 60–120 min in N2, has been studied by high resolution transmission electron microscopy (HRTEM), synchrotron radiation X-ray diffraction (XRD), X-ray absorption fine structure (XAFS) technique at the Ga K-edge, as well as by Rutherford Backscattering spectrometry (RBS), X-Ray photoelectron spectroscopy (XPS), Raman spectroscopy (RS) and Scanning electron microscopy (SEM). The effect of the dielectric matrix, of the gas annealing environment (N2) and of the annealing time at 950 °C have been investigated. GaN nanocrystals implanted near the surface are observed in SiO2/Si only. The hexagonal wurtzite crystalline structure was confirmed by HRTEM, XRD and Raman spectroscopy. However, the synthesis process is multiphasic as elemental Ga0 nanoparticles at larger depths and Ga2O3 rods (~200–300 nm) on the surface were formed in addition to implanted h-GaN, as shown by TEM, XAFS, SEM, XPS and Raman spectroscopy. Moreover, Ga atoms are always remaining on some vacant Si sites in the SiO2 matrix. The local environment around Ga is quite different in the SiNx matrix, as seen by XAFS. This difference can be explained by the gallium and nitrogen diffusions which are much faster in the case of the SiO2 matrix, as shown by RBS profiles. Results are discussed in close comparison with existing literature.
References
More filters
Journal ArticleDOI
TL;DR: A software package for the analysis of X-ray absorption spectroscopy (XAS) data is presented, based on the IFEFFIT library of numerical and XAS algorithms and is written in the Perl programming language using the Perl/Tk graphics toolkit.
Abstract: A software package for the analysis of X-ray absorption spectroscopy (XAS) data is presented. This package is based on the IFEFFIT library of numerical and XAS algorithms and is written in the Perl programming language using the Perl/Tk graphics toolkit. The programs described here are: (i) ATHENA, a program for XAS data processing, (ii) ARTEMIS, a program for EXAFS data analysis using theoretical standards from FEFF and (iii) HEPHAESTUS, a collection of beamline utilities based on tables of atomic absorption data. These programs enable high-quality data analysis that is accessible to novices while still powerful enough to meet the demands of an expert practitioner. The programs run on all major computer platforms and are freely available under the terms of a free software license.

12,505 citations

Journal ArticleDOI
TL;DR: In this paper, the authors focus on extended x-ray absorption fine structure (EXAFS) well above an X-ray edge, and, to a lesser extent, on xray absorption near-edge structure (XANES) closer to an edge.
Abstract: Dramatic advances in the understanding of x-ray absorption fine structure (XAFS) have been made over the past few decades, which have led ultimately to a highly quantitative theory. This review covers these developments from a unified multiple-scattering viewpoint. The authors focus on extended x-ray absorption fine structure (EXAFS) well above an x-ray edge, and, to a lesser extent, on x-ray absorption near-edge structure (XANES) closer to an edge. The discussion includes both formal considerations, derived from a many-electron formulation, and practical computational methods based on independent-electron models, with many-body effects lumped into various inelastic losses and energy shifts. The main conceptual issues in XAFS theory are identified and their relative importance is assessed; these include the convergence of the multiple-scattering expansion, curved-wave effects, the scattering potential, inelastic losses, self-energy shifts, and vibrations and structural disorder. The advantages and limitations of current computational approaches are addressed, with particular regard to quantitative experimental comparisons.

2,721 citations

Journal ArticleDOI
28 Jun 1996-Science
TL;DR: A thermal reaction of Li3N and GaCl3 in which benzene was used as the solvent under pressure has been carried out for the preparation of 30-nanometer particles of gallium nitride (GaN) at 280°C, and the yield of GaN reached 80%.
Abstract: A thermal reaction of Li3N and GaCl3 in which benzene was used as the solvent under pressure has been carried out for the preparation of 30-nanometer particles of gallium nitride (GaN) at 280°C. This temperature is much lower than that of traditional methods, and the yield of GaN reached 80%. The x-ray powder diffraction pattern indicated that sample was mainly hexagonal-phase GaN with a small fraction of rocksalt-phase GaN, which has a lattice constant a = 4.100 angstroms. This rocksalt structure, which had been observed previously only under high pressure (at least 37 gigapascals) was observed directly with high-resolution electron microscopy.

398 citations

Journal ArticleDOI
TL;DR: Ion implantation has become a versatile and powerful technique for synthesizing nanometer-scale clusters and crystals embedded in the near-surface region of a variety of hosts in order to create nanocomposite materials with often unique optical, magnetic, and other properties as mentioned in this paper.
Abstract: Ion implantation has become a versatile and powerful technique for synthesizing nanometer-scale clusters and crystals embedded in the near-surface region of a variety of hosts in order to create nanocomposite materials with often unique optical, magnetic, and other properties. Here we review some of the principal features of this nanophase materials synthesis technique as well as the materials properties that are exhibited by nanocomposites created by using ion beams. Outstanding difficulties and future research directions are also discussed.

263 citations

Journal ArticleDOI
TL;DR: Wurtzite single crystal GaN nanocolumns were grown by plasma-assisted molecular beam epitaxy on bare Si(001) substrates in this paper, and the results showed that the nanocumns with diameters in the range of 20-40nm have no traces of extended defects and they grow aligned along the [0001] direction.
Abstract: Wurtzite single crystal GaN nanocolumns were grown by plasma-assisted molecular beam epitaxy on bare Si(001) substrates. Nanocolumns with diameters in the range of 20–40nm have no traces of extended defects and they grow aligned along the [0001] direction. Photoluminescence measurements in nanocolumns evidence a very high crystal quality in terms of intense and narrow excitonic emissions. Raman scattering data show that the nanocolumns are strain-free. These results open the way to an efficient integration of optoelectronic devices with the complementary metal oxide semiconductor technology.

166 citations