Grafting of zwitterion from polysulfone membrane via surface-initiated ATRP with enhanced antifouling property and biocompatibility
TL;DR: Zwitterionic polymer of poly(sulfobetaine methacrylate) (PSBMA) was grafted from polysulfone (PSf) membrane via surface-initiated atom transfer radical polymerization (SI-ATRP) as discussed by the authors.
About: This article is published in Journal of Membrane Science.The article was published on 2013-11-01. It has received 262 citations till now. The article focuses on the topics: Membrane & Protein adsorption.
Citations
More filters
TL;DR: The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering as mentioned in this paper.
Abstract: The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ev...
681 citations
TL;DR: The structure and synthesis of polyzwitterions are reviewed in this paper, emphasizing the general challenges faced, and successful strategies to obtain polymers with a true balance of permanent cationic and anionic groups, thus resulting in an overall zero charge.
Abstract: The structures and synthesis of polyzwitterions ("polybetaines") are reviewed, emphasizing the literature of the past decade. Particular attention is given to the general challenges faced, and to successful strategies to obtain polymers with a true balance of permanent cationic and anionic groups, thus resulting in an overall zero charge. Also, the progress due to applying new methodologies from general polymer synthesis, such as controlled polymerization methods or the use of "click" chemical reactions is presented. Furthermore, the emerging topic of responsive ("smart") polyzwitterions is addressed. The considerations and critical discussions are illustrated by typical examples.
320 citations
TL;DR: In this article, an overview of superhydrophobic surfaces (SHS) is provided, and then their fabrication methods discussed, and the corrosion resistance of these SHS fabricated by various methods and their chemical stability and mechanical stability are reviewed.
288 citations
TL;DR: This review summarizes recent advances in the synthesis, assembly, and applications of nanoengineered reporting and transducing components critical for efficient biosensing, and envision the exciting potential of high-performance nanomaterials that will cause disruptive improvements in the field of biosensing.
Abstract: The robust, sensitive, and selective detection of targeted biomolecules in their native environment by prospective nanostructures holds much promise for real-time, accurate, and high throughput biosensing. However, in order to be competitive, current biosensor nanotechnologies need significant improvements, especially in specificity, integration, throughput rate, and long-term stability in complex bioenvironments. Advancing biosensing nanotechnologies in chemically “noisy” bioenvironments require careful engineering of nanoscale components that are highly sensitive, biorecognition ligands that are capable of exquisite selective binding, and seamless integration at a level current devices have yet to achieve. This review summarizes recent advances in the synthesis, assembly, and applications of nanoengineered reporting and transducing components critical for efficient biosensing. First, major classes of nanostructured components, both inorganic reporters and organic transducers, are discussed in the contex...
242 citations
TL;DR: The controlled architecture of the zwitterionic polymer brush via ATRP has the potential for a facile antifouling modification of a wide range of water treatment membranes without compromising intrinsic transport properties.
Abstract: In this study, we demonstrate a highly antifouling thin-film composite (TFC) membrane by grafting a zwitterionic polymer brush via atom-transfer radical-polymerization (ATRP), a controlled, environmentally benign chemical process. Initiator molecules for polymerization were immobilized on the membrane surface by bioinspired catechol chemistry, leading to the grafting of a dense zwitterionic polymer brush layer. Surface characterization revealed that the modified membrane exhibits reduced surface roughness, enhanced hydrophilicity, and lower surface charge. Chemical force microscopy demonstrated that the modified membrane displayed foulant-membrane interaction forces that were 1 order of magnitude smaller than those of the pristine TFC membrane. The excellent fouling resistance imparted by the zwitterionic brush layer was further demonstrated by significantly reduced adsorption of proteins and bacteria. In addition, forward osmosis fouling experiments with a feed solution containing a mixture of organic fo...
212 citations
References
More filters
TL;DR: This Review surveys the latest efforts in which the reduction of irreversible fouling is attempted by the modification of the membrane surface.
Abstract: Fouling is the deposition of retained particles, colloids, macromolecules, salts, etc., at the membrane surface or inside the pore at the pore wall. Fouling reduces the membrane flux either temporarily or permanently. While the initial flux can be restored by washing the membrane or by applying back-pressures to the temporarily fouled membrane, it cannot be restored when the membrane becomes permanently fouled. The main focus of this Review is on the permanent flux decline. The fouling is caused by the interaction between the membrane surface and the foulants, which include inorganic, organic, and biological substances in many different forms. The foulants not only physically interact with the membrane surface but also chemically degrade the membrane material. For example, colloidal particles, such as natural organic matter (NOM), are considered as the main reason for membrane fouling, which could be controlled by the permeation hindrance and electric double layer repulsion. The formation of biofilms with extra-cellular polymeric substances (EPSs) and microbial cells matrix is the example of biofouling.1 Biofilms are developed by the microbial cell adhesion and subsequent colonization on the membrane surfaces through EPS, which may account for 50-90% of total organic carbon. The biofouling could be minimized by periodical washing with chemicals such as sodium hypochlorite solution, but it will result in the simultaneous degradation of the membrane material’s lifetime. It is a severe problem for membranes used in pressure-driven processes such as reverse osmosis (RO), nanofiltration (NF), ultrafiltration (UF), and microfiltration (MF) and also for other membrane processes, seriously hampering the applications of membrane processes. Hence, membrane fouling as well as its reduction has been a subject of many academic studies and industrial research and development efforts since the early 1960s when industrial membrane separation processes emerged. Selection of an appropriate membrane, pretreatment of the process fluid, adjustment of operating design, and conditions are all known to control fouling to some extent. On the other hand, development of absolutely nonfouling membranes seems extremely difficult, if not totally impossible. This Review surveys the latest efforts in which the reduction of irreversible fouling is attempted by the modification of the membrane surface. The separation process by membrane is essentially a surface phenomenon. More specifically, the skin layer or top surface layer plays the vital role. Therefore, it is a natural consequence to modify membrane surface for reducing the fouling. It is generally accepted that an increase in hydrophilicity offers better fouling resistance because protein and many other foulants are hydrophobic in nature. Most nanofiltration membranes are electrically charged, which significantly reduces the scale-formation. During the past decade, the emergence of atomic force microscopy (AFM) enabled us to study the effect of the surface roughness in nanoscale on the membrane fouling. It is believed that the membrane fouling with particulate substance is enhanced by an increase in the surface roughness. It is shown in this Review that all of the above concepts, except for the membrane surface charge, are based on correlation of data, which are, at best, valid within a limited range of surface property parameters. * To whom correspondence should be addressed. Phone: (613) 562-5800, ext 6085. Fax: (613) 562-5172. E-mail: rana@eng.uottawa.ca. Dipak Rana is presently a Research Scientist in the Industrial Membrane Research Institute, Department of Chemical and Biological Engineering, University of Ottawa, Ottawa, Canada. Dr. Rana has been a member of various prestigious organizations, such as the Indian Chemical Society, Society for Polymer Science, India, Society of Plastics Engineers, USA, American Chemical Society, etc., for a long period. He was awarded a Ph.D. in Science from Jadavpur University, Calcutta (presently Kolkata), when he was working at the Indian Association for the Cultivation of Science, Calcutta, India. He received his Master in Chemistry with specialization in Physical Chemistry as well as his Bachelor with Honors in Chemistry from the University of Calcutta, India. Dr. Rana has published over 50 professional papers and book chapters. Chem. Rev. 2010, 110, 2448–2471 2448
1,812 citations
TL;DR: In this paper, the authors used surface plasmon resonance spectroscopy and self-assembled monolayers (SAMs) to determine the characteristics of functional groups that give surfaces the ability to resist the nonspecific adsorption of proteins from solution.
Abstract: This paper describes the use of surface plasmon resonance (SPR) spectroscopy and self-assembled monolayers (SAMs) to determine the characteristics of functional groups that give surfaces the ability to resist the nonspecific adsorption of proteins from solution. Mixed SAMs presenting different functional groups were prepared for screening using a synthetic protocol based on the reaction of organic amines with a SAM terminated by interchain carboxylic anhydride groups. Surfaces that presented derivatives of oligo(sarcosine), N-acetylpiperazine, and permethylated sorbitol groups were particularly effective in resisting the adsorption of proteins. Incorporation of these groups into single-component SAMs resulted in surfaces that are comparable to (but slightly less good than) single-component SAMs that present oligo(ethylene glycol) in their ability to resist the adsorption of proteins. In the group of surfaces examined, those that resisted the adsorption of proteins had the following properties: they were ...
1,678 citations
TL;DR: Current perspectives on all four of these components in thrombosis and with biomaterials and cardiovascular devices are summarized.
1,251 citations
TL;DR: The author’s website is www.hematologylibrary.org, which can be found online at http://bloodjournal.org/site/misc/rights.xhtml.
1,098 citations
TL;DR: The atom transfer radical polymerization (ATRP) of styrene and acrylates from silicon wafers modified with an initiator layer composed of 2-bromoisobutyrate fragments is described in this paper.
Abstract: The atom transfer radical polymerization (ATRP) of styrene and acrylates from silicon wafers modified with an initiator layer composed of 2-bromoisobutyrate fragments is described. In the presence of the proper ratio of activating and deactivating transition-metal species, controlled radical polymerizations of styrene were observed such that the thickness of the layer consisting of chains grown from the surface increased linearly with the molecular weight of chains polymerized in solution in identical, yet separate, experiments. The layer thickness increased linearly with reaction time for ATRP of styrene and methyl acrylate due to both the extremely low initiator concentration relative to monomer and the low monomer conversion. Further evidence for control was observed by the polymerization of blocks of either methyl or tert-butyl acrylate from the polystyrene layer. Modification of the hydrophilicity of the surface layer was achieved by hydrolysis of the poly(styrene-b-tert-butyl acrylate) to poly(styre...
908 citations