Graphene Infused Ecological Polymer Composites for Electromagnetic Interference Shielding and Heat Management Applications.
TL;DR: In this article, a series of polylactic acid/graphene nanoplatelet composites with different flake lateral sizes (0.2, 5 and 25 μm) were used for electromagnetic interference (EMI) shielding and heat management applications.
Abstract: In the age of mobile electronics and increased aerospace interest, multifunctional materials such as the polymer composites reported here are interesting alternatives to conventional materials, offering reduced cost and size of an electrical device packaging. We report a detailed study of an ecological and dual-functional polymer composite for electromagnetic interference (EMI) shielding and heat management applications. We studied a series of polylactic acid/graphene nanoplatelet composites with six graphene nanoplatelet loadings, up to 15 wt%, and three different flake lateral sizes (0.2, 5 and 25 μm). The multifunctionality of the composites is realized via high EMI shielding efficiency exceeding 40 dB per 1 mm thick sample and thermal conductivity of 1.72 W/mK at 15 wt% nanofiller loading. The EMI shielding efficiency measurements were conducted in the microwave range between 0.2 to 12 GHz, consisting of the highly relevant X-band (8–12 GHz). Additionally, we investigate the influence of the nanofiller lateral size on the studied physical properties to optimize the studied functionalities per given nanofiller loading.
Citations
More filters
TL;DR: In this article , a review concludes the recent development of graphene/polymer composites by using graphene as fillers to improve the thermal conductivity and EMI shielding effectiveness (EMI SE).
34 citations
TL;DR: In this article , the authors proposed an electromagnetic shielding material sprayed with silver-coated copper powder (core-shell powder), which can be used in various frequency ranges owing to the excellent shielding effectiveness of the core-shell paste used in this study.
Abstract: This study proposes an electromagnetic shielding material sprayed with silver-coated copper powder (core-shell powder). The shielding properties of the material are analyzed in details section. Cross-sectional observation and sheet resistance measurement were used to determine the thickness and electrical conductivity of the electromagnetic shielding layer, which was generated by spray-coating; this aided in confirming the uniformity of the coating film. The results indicate that the electromagnetic interference shielding effectiveness increases when the silver-coated copper paste (core-shell paste) is used as the coating material rather than the conventional aluminum base. The proposed material can be used in various frequency ranges owing to the excellent shielding effectiveness of the core-shell paste used in this study. Further investigations on the optimized spray-coating type of electromagnetic shielding material are required based on the composition of the core-shell paste and the thickness of the coating film.
4 citations
TL;DR: In this article , an ultrathin graphene nanosheet-based foams with many micropores are prepared by a general salt-template guided freeze-drying-calcination route with PEG 20000 and NaCl as a carbon source and a template, respectively.
3 citations
TL;DR: In this article , the alternating multi-layer structured reduced graphene oxide＆polyether sulfone (RGOx&PESy) film is fabricated via a facile thermal pressure process, which has independently aligned packing layers to ensure the conductive network.
2 citations
TL;DR: In this paper , a review of nanomaterials-based polymer nanocomposites for EMI shielding applications is presented, where the dominant nature of any one of the properties may be required.
Abstract: Nanomaterials have assumed an imperative part in the advancement of human evolution and are more intertwined in our thinking and application. Contrary to the conventional micron-filled composites, the unique nanofillers often modify the properties of the polymer matrix at the same time, bestowing new functionality because of their chemical composition and their nano dimensions. The unprecedented technological revolution is driving people to adapt to miniaturized electronic gadgets. The sources of electromagnetic fields are ubiquitous in a tech-driven society. The COVID-19 pandemic has escalated the proliferation of electromagnetic interference as the world embraced remote working and content delivery over mobile communication devices. While EMI shielding is performed using the combination of reflection, absorption, and electrical and magnetic properties, under certain considerations, the dominant nature of any one of the properties may be required. The miniaturization of electronic gadgets coupled with wireless technologies is driving us to search for alternate lightweight EMI shielding materials with improved functionalities relative to conventional metals. Polymer nanocomposites have emerged as functional materials with versatile properties for EMI shielding. This paper reviews nanomaterials-based polymer nanocomposites for EMI shielding applications.
2 citations
References
More filters
TL;DR: The extremely high value of the thermal conductivity suggests that graphene can outperform carbon nanotubes in heat conduction and establishes graphene as an excellent material for thermal management.
Abstract: We report the measurement of the thermal conductivity of a suspended single-layer graphene. The room temperature values of the thermal conductivity in the range ∼(4.84 ± 0.44) × 103 to (5.30 ± 0.48) × 103 W/mK were extracted for a single-layer graphene from the dependence of the Raman G peak frequency on the excitation laser power and independently measured G peak temperature coefficient. The extremely high value of the thermal conductivity suggests that graphene can outperform carbon nanotubes in heat conduction. The superb thermal conduction property of graphene is beneficial for the proposed electronic applications and establishes graphene as an excellent material for thermal management.
11,878 citations
TL;DR: It is shown that the opacity of suspended graphene is defined solely by the fine structure constant, a = e2/hc � 1/137 (where c is the speed of light), the parameter that describes coupling between light and relativistic electrons and that is traditionally associated with quantum electrodynamics rather than materials science.
Abstract: There are few phenomena in condensed matter physics that are defined only by the fundamental constants and do not depend on material parameters. Examples are the resistivity quantum, h/e2 (h is Planck's constant and e the electron charge), that appears in a variety of transport experiments and the magnetic flux quantum, h/e, playing an important role in the physics of superconductivity. By and large, sophisticated facilities and special measurement conditions are required to observe any of these phenomena. We show that the opacity of suspended graphene is defined solely by the fine structure constant, a = e2/hc feminine 1/137 (where c is the speed of light), the parameter that describes coupling between light and relativistic electrons and that is traditionally associated with quantum electrodynamics rather than materials science. Despite being only one atom thick, graphene is found to absorb a significant (pa = 2.3%) fraction of incident white light, a consequence of graphene's unique electronic structure.
7,952 citations
TL;DR: The thermal properties of carbon materials are reviewed, focusing on recent results for graphene, carbon nanotubes and nanostructured carbon materials with different degrees of disorder, with special attention given to the unusual size dependence of heat conduction in two-dimensional crystals.
Abstract: Recent years have seen a rapid growth of interest by the scientific and engineering communities in the thermal properties of materials. Heat removal has become a crucial issue for continuing progress in the electronic industry, and thermal conduction in low-dimensional structures has revealed truly intriguing features. Carbon allotropes and their derivatives occupy a unique place in terms of their ability to conduct heat. The room-temperature thermal conductivity of carbon materials span an extraordinary large range--of over five orders of magnitude--from the lowest in amorphous carbons to the highest in graphene and carbon nanotubes. Here, I review the thermal properties of carbon materials focusing on recent results for graphene, carbon nanotubes and nanostructured carbon materials with different degrees of disorder. Special attention is given to the unusual size dependence of heat conduction in two-dimensional crystals and, specifically, in graphene. I also describe the prospects of applications of graphene and carbon materials for thermal management of electronics.
5,189 citations
TL;DR: In this paper, the authors review thermal and thermoelectric properties of carbon materials focusing on recent results for graphene, carbon nanotubes and nanostructured carbon materials with different degrees of disorder.
Abstract: Recent years witnessed a rapid growth of interest of scientific and engineering communities to thermal properties of materials. Carbon allotropes and derivatives occupy a unique place in terms of their ability to conduct heat. The room-temperature thermal conductivity of carbon materials span an extraordinary large range – of over five orders of magnitude – from the lowest in amorphous carbons to the highest in graphene and carbon nanotubes. I review thermal and thermoelectric properties of carbon materials focusing on recent results for graphene, carbon nanotubes and nanostructured carbon materials with different degrees of disorder. A special attention is given to the unusual size dependence of heat conduction in two-dimensional crystals and, specifically, in graphene. I also describe prospects of applications of graphene and carbon materials for thermal management of electronics.
3,609 citations
TL;DR: In this paper, the thermal conductivity of graphene suspended across trenches in Si∕SiO2 wafer was investigated using a noncontact technique based on micro-Raman spectroscopy.
Abstract: The authors reported on investigation of the thermal conductivity of graphene suspended across trenches in Si∕SiO2 wafer. The measurements were performed using a noncontact technique based on micro-Raman spectroscopy. The amount of power dissipated in graphene and corresponding temperature rise were determined from the spectral position and integrated intensity of graphene’s G mode. The extremely high thermal conductivity in the range of ∼3080–5150W∕mK and phonon mean free path of ∼775nm near room temperature were extracted for a set of graphene flakes. The obtained results suggest graphene’s applications as thermal management material in future nanoelectronic circuits.
1,881 citations