Growing and analyzing static biofilms
TL;DR: In this article, the early stages of biofilm formation are examined using static biofilm assays, which are suitable for either small or relatively large-scale studies and can be used individually or in combination for the study of biofilms.
Abstract: Many bacteria can exist as surface-attached aggregations known as biofilms. Presented in this unit are several approaches for the study of these communities. The focus here is on static biofilm systems, which are particularly useful for examination of the early stages of biofilm formation, including initial adherence to the surface and microcolony formation. Furthermore, most of the techniques presented are easily adapted to the study of biofilms under a variety of conditions and are suitable for either small- or relatively large-scale studies. Unlike assays involving continuous-flow systems, the static biofilm assays described here require very little specialized equipment and are relatively simple to execute. In addition, these static biofilm systems allow analysis of biofilm formation with a variety of readouts, including microscopy of live cells, macroscopic visualization of stained bacteria, and viability counts. Used individually or in combination, these assays provide useful means for the study of biofilms.
Citations
More filters
01 Jan 2015
TL;DR: The multiwell microtiter plate assay is the most widely used method due to its versatility to reveal the biofilm and that it allows the analysis of different stages of biofilm.
Abstract: To produce beneficial effects, plant growth promoting bacteria have to interact with the plant surface to form complex multicellular assemblies and aggregates named biofilms. The study of biofilm development and its physiology is an emerging topic in the knowledge of plant microbe interaction. Therefore, techniques to study its formation and functions are evolving from easy approaches to more complex, time consuming, and with expensive equipment requirement ones. The multiwell microtiter plate assay is the most widely used method due to its versatility to reveal the biofilm and that it allows the analysis of different stages of biofilm. Other more sophisticated protocols based on the use of fluorochromes are described. Care should be taken in analyzing results and their interpretation as differences among roots colonizing and biofilm formed on inert supports are normally to occur. Here, we make a presentation of the methods used to study biofilm and then describe in detail the most commonly used in investigations of rhizobacteria biofilms and its components with application to root colonization.
9 citations
TL;DR: Students constructed Winogradsky columns and engaged in a collaborative effort through discussion, trouble-shooting, weekly meetings and the summative conference, which enabled students to participate in an authentic research experience within a traditional undergraduate laboratory course.
Abstract: Many traditional lab courses include both standard and inquiry-based experiments, yet lack cooperative and authentic lab experiences. Such experiences are important for microbiology students and burgeoning researchers. In a novel lab environment, students constructed Winogradsky columns using common soil and water sources. During initial column incubation, students learned methods for identification of microbial isolates including staining, microscopy, biochemistry and 16S-rRNA sequencing. Concurrently, students challenged their columns via varied substrates and contaminants including enrichment with nitro-compounds, hydrocarbons, acids and other environmental stressors. Students were encouraged to use both basic and more advanced identification methods to study the effect of such challenges within their columns. The students were required to maintain lab notebooks and attend weekly lab meetings, which were designed to share progress and facilitate experimentation among their lab-mates. At the end of the semester, students gathered to present their data and conclusions. By engaging in weekly meetings and a final conference, students were able to construct a snapshot of the microbial diversity, including phylogeny and metabolism, in the soil and water used to construct the Winogradsky columns. By using a common source, students were able to observe an array of diversity within individual columns and extrapolate towards the tremendous microbial diversity in the initial soil and water samples. Equally important to the data obtained, the students engaged in a collaborative effort through discussion, trouble-shooting, weekly meetings and the summative conference. Such efforts enabled students to participate in an authentic research experience within a traditional undergraduate laboratory course. Editor's Note : The ASM advocates that students must successfully demonstrate the ability to explain and practice safe laboratory techniques. For more information, read the laboratory safety section of the ASM Curriculum Recommendations: Introductory Course in Microbiology and the Guidelines for Biosafety in Teaching Laboratories, available at www.asm.org . The Editors of JMBE recommend that adopters of the protocols included in this article follow a minimum of Biosafety Level 2 practices.
9 citations
TL;DR: Cannabinoids exhibit antibacterial activity against MRSA, inhibit its ability to form biofilms and eradicate stationary phase cells persistent to antibiotics, and work in combination with polymyxin B against multi-drug resistant Gram-negative pathogens, revealing the broad-spectrum therapeutic potential for cannabinoids.
Abstract: The spread of antimicrobial resistance continues to be a priority health concern worldwide, necessitating exploration of alternative therapies. Cannabis sativa has long been known to contain antibacterial cannabinoids, but their potential to address antibiotic resistance has only been superficially investigated. Here, we show that cannabinoids exhibit antibacterial activity against MRSA, inhibit its ability to form biofilms and eradicate pre-formed biofilms and stationary phase cells persistent to antibiotics. We show that the mechanism of action of cannabigerol is through targeting the cytoplasmic membrane of Gram-positive bacteria and demonstrate in vivo efficacy of cannabigerol in a murine systemic infection model caused by MRSA. We also show that cannabinoids are effective against Gram-negative organisms whose outer membrane is permeabilized, where cannabigerol acts on the inner membrane. Finally, we demonstrate that cannabinoids work in combination with polymyxin B against multi-drug resistant Gram-negative pathogens, revealing the broad-spectrum therapeutic potential for cannabinoids.
9 citations
TL;DR: In this article, a magnetically controlled nanocomposite with a stimuli-responsive release profile based on calcium carbonate and magnetite with an encapsulated antibiotic (ciprofloxacin) was used to solve the problem of biofilms.
Abstract: Biofilms are the reason for a vast majority of chronic inflammation cases and most acute inflammation. The treatment of biofilms still is a complicated task due to the low efficiency of drug delivery and high resistivity of the involved bacteria to harmful factors. Here we describe a magnetically controlled nanocomposite with a stimuli-responsive release profile based on calcium carbonate and magnetite with an encapsulated antibiotic (ciprofloxacin) that can be used to solve this problem. The material magnetic properties allowed targeted delivery, accumulation, and penetration of the composite in the biofilm, as well as the rapid triggered release of the entrapped antibiotic. Under the influence of an RF magnetic field with a frequency of 210 kHz, the composite underwent a phase transition from vaterite into calcite and promoted the release of ciprofloxacin. The effectiveness of the composite was tested against formed biofilms of E. coli and S. aureus and showed a 71% reduction in E. coli biofilm biomass and an 85% reduction in S. aureus biofilms. The efficiency of the composite with entrapped ciprofloxacin was higher than for the free antibiotic in the same concentration, up to 72%. The developed composite is a promising material for the treatment of biofilm-associated inflammations.
9 citations
01 Jan 2017
TL;DR: In the present review, in-depth advanced modeling approaches based on the action of substrates on developmental biofilm physiology have been discussed and equations to predict biofilm dispersal stages have been elaborated.
Abstract: Biofilms are resilient and complex microbial communities or populations encased in a self-producing extracellular matrix existing in nature, which account for their robustness against a wide variety of stresses. In nature, multispecies biofilms have been found to occur frequently, whereas monospecies biofilms have been rare and found only when developed. By understanding the sociobiology of biofilm bacteria and harnessing the knowledge based on known biochemical and physical parameters, the underlying complexity of biofilm microenvironment could be better predicted by state-of-the-art advanced modeling approaches. In the present review, in-depth advanced modeling approaches based on the action of substrates on developmental biofilm physiology have been discussed. Equations for forces and adherence, quorum sensing, fluid flow dynamics, the social arrangement of community members in their favorable places, stratification, and pattern formation inside the biofilm have been elaborated. Equations to predict biofilm dispersal stages have been also discussed. Different models which uncover microbial biofilm life cycle stages to predict their complexity and recommended future variables like “omics” for magnification have been reported. This chapter will help to provide additional platform related to the genetic complex networking of biofilm bacteria for conceptual underpinnings of biofilm microenvironment.
9 citations
References
More filters
TL;DR: The optical densities of stained bacterial films adherent to plastic tissue culture plates serve as a quantitative model for the study of the adherence of coagulase-negative staphylococci to medical devices, a process which may be important in the pathogenesis of foreign body infections.
Abstract: The adherence of coagulase-negative staphylococci to smooth surfaces was assayed by measuring the optical densities of stained bacterial films adherent to the floors of plastic tissue culture plates. The optical densities correlated with the weight of the adherent bacterial film (r = 0.906; P less than 0.01). The measurements also agreed with visual assessments of bacterial adherence to culture tubes, microtiter plates, and tissue culture plates. Selected clinical strains were passed through a mouse model for foreign body infections and a rat model for catheter-induced endocarditis. The adherence measurements of animal passed strains remained the same as those of the laboratory-maintained parent strain. Spectrophotometric classification of coagulase-negative staphylococci into nonadherent and adherent categories according to these measurements had a sensitivity, specificity, and accuracy of 90.6, 80.8, and 88.4%, respectively. We examined a previously described collection of 127 strains of coagulase-negative staphylococci isolated from an outbreak of intravascular catheter-associated sepsis; strains associated with sepsis were more adherent than blood culture contaminants and cutaneous strains (P less than 0.001). We also examined a collection of 84 strains isolated from pediatric patients with cerebrospinal fluid (CSF) shunts; once again, pathogenic strains were more adherent than were CSF contaminants (P less than 0.01). Finally, we measured the adherence of seven endocarditis strains. As opposed to strains associated with intravascular catheters and CSF shunts, endocarditis strains were less adherent than were saprophytic strains of coagulase-negative staphylococci. The optical densities of bacterial films adherent to plastic tissue culture plates serve as a quantitative model for the study of the adherence of coagulase-negative staphylococci to medical devices, a process which may be important in the pathogenesis of foreign body infections. Images
1,980 citations
"Growing and analyzing static biofil..." refers methods in this paper
...While popularized in the mid-to-late 1990s (Mack et al., 1994; O’Toole et al., 1999), the assay in its typically used form is derived from a protocol published by Christensen et al. (1985)....
[...]
TL;DR: Results show that oxygen limitation and low metabolic activity in the interior of the biofilm, not poor antibiotic penetration, are correlated with antibiotic tolerance of this P. aeruginosa biofilm system.
Abstract: The roles of slow antibiotic penetration, oxygen limitation, and low metabolic activity in the tolerance of Pseudomonas aeruginosa in biofilms to killing by antibiotics were investigated in vitro. Tobramycin and ciprofloxacin penetrated biofilms but failed to effectively kill the bacteria. Bacteria in colony biofilms survived prolonged exposure to either 10 μg of tobramycin ml−1or 1.0 μg of ciprofloxacin ml−1. After 100 h of antibiotic treatment, during which the colony biofilms were transferred to fresh antibiotic-containing plates every 24 h, the log reduction in viable cell numbers was only 0.49 ± 0.18 for tobramycin and 1.42 ± 0.03 for ciprofloxacin. Antibiotic permeation through colony biofilms, indicated by a diffusion cell bioassay, demonstrated that there was no acceleration in bacterial killing once the antibiotics penetrated the biofilms. These results suggested that limited antibiotic diffusion is not the primary protective mechanism for these biofilms. Transmission electron microscopic observations of antibiotic-affected cells showed lysed, vacuolated, and elongated cells exclusively near the air interface in antibiotic-treated biofilms, suggesting a role for oxygen limitation in protecting biofilm bacteria from antibiotics. To test this hypothesis, a microelectrode analysis was performed. The results demonstrated that oxygen penetrated 50 to 90 μm into the biofilm from the air interface. This oxic zone correlated to the region of the biofilm where an inducible green fluorescent protein was expressed, indicating that this was the active zone of bacterial metabolic activity. These results show that oxygen limitation and low metabolic activity in the interior of the biofilm, not poor antibiotic penetration, are correlated with antibiotic tolerance of this P. aeruginosa biofilm system.
918 citations
TL;DR: The results suggest that some other resistance mechanism is involved for both agents and contributed to wild-type biofilm resistance to ampicillin but not to ciprofloxacin.
Abstract: The penetration of two antibiotics, ampicillin and ciprofloxacin, through biofilms developed in an in vitro model system was investigated. The susceptibilities of biofilms and corresponding freely suspended bacteria to killing by the antibiotics were also measured. Biofilms of Klebsiella pneumoniae were developed on microporous membranes resting on agar nutrient medium. The susceptibilities of planktonic cultures and biofilms to 10 times the MIC were determined. Antibiotic penetration through biofilms was measured by assaying the concentration of antibiotic that diffused through the biofilm to an overlying filter disk. Parallel experiments were performed with a mutant K. pneumoniae strain in which beta-lactamase activity was eliminated. For wild-type K. pneumoniae grown in suspension culture, ampicillin and ciprofloxacin MICs were 500 and 0.18 microgram/ml, respectively. The log reductions in the number of CFU of planktonic wild-type bacteria after 4 h of treatment at 10 times the MIC were 4.43 +/- 0.33 and 4.14 +/- 0.33 for ampicillin and ciprofloxacin, respectively. Biofilms of the same strain were much less susceptible, yielding log reductions in the number of CFU of -0.06 +/- 0.06 and 1.02 +/- 0.04 for ampicillin and ciprofloxacin, respectively, for the same treatment. The number of CFU in the biofilms after 24 h of antibiotic exposure was not statistically different from the number after 4 h of treatment. Ampicillin did not penetrate wild-type K. pneumoniae biofilms, whereas ciprofloxacin and a nonreactive tracer (chloride ion) penetrated the biofilms quickly. The concentration of ciprofloxacin reached the MIC throughout the biofilm within 20 min. Ampicillin penetrated biofilms formed by a beta-lactamase-deficient mutant. However, the biofilms formed by this mutant were resistant to ampicillin treatment, exhibiting a 0.18 +/- 0.07 log reduction in the number of CFU after 4 h of exposure and a 1.64 +/- 0.33 log reduction in the number of CFU after 24 h of exposure. Poor penetration contributed to wild-type biofilm resistance to ampicillin but not to ciprofloxacin. The increased resistance of the wild-type strain to ciprofloxacin and the mutant strain to ampicillin and ciprofloxacin could not be accounted for by antibiotic inactivation or slow diffusion since these antibiotics fully penetrated the biofilms. These results suggest that some other resistance mechanism is involved for both agents.
885 citations
"Growing and analyzing static biofil..." refers methods in this paper
...Colony biofilms Colony biofilms (see Basic Protocol 3) have typically been used for the purpose of determining antibiotic resistance (Anderl et al., 2000; Walters et al., 2003)....
[...]
TL;DR: This article operationally defines a biofilm as bacteria that are attached to a surface in sufficient numbers to be detected macroscopically.
Abstract: Interest in the study of microbial biofilms has increased greatly in recent
years due in large part to the profound impact biofilms have in clinical,
industrial, and natural settings. Traditionally, the study of biofilms has
been approached from an ecological or engineering perspective, using a
combination of classical microbiology and advanced microscopy. We and
others have begun to use genetic approaches to understand the development
of these complex communities. To begin we must answer the question:
What is a biofilm? This definition, by necessity, may be quite broad because
it is clear that many organisms can attach to a variety of surfaces under
diverse environmental conditions. Therefore, in the context of this article
we will operationally define a biofilm as bacteria that are attached to a
surface in sufficient numbers to be detected macroscopically.
820 citations
TL;DR: The results demonstrate that the mutants were impaired in the accumulative phase of biofilm production by S. epidermidis by mediating intercellular adhesion.
Abstract: The primary attachment to polymer surfaces followed by accumulation in multilayered cell clusters leads to production of Staphylococcus epidermidis biofilms, which are thought to contribute to virulence in biomaterial-related infections. We isolated Tn917 transposon mutants of biofilm-producing S. epidermidis 13-1, which were completely biofilm negative. In pulsed-field gel electrophoresis no obvious deletions of the mutants were noted. The Tn917 insertions of mutants M10 and M11 were located on different EcoRI fragments but on identical 60-kb SmaI and 17-kb BamHI chromosomal fragments. Linkage of transposon insertions of mutants M10 and M11 with the altered phenotype was demonstrated by phage transduction, whereas the several other mutants apparently represented spontaneous variants. In a primary attachment assay with polystyrene spheres, no significant difference between any of the mutants and the wild type could be detected. Cell clustering as an indication of intercellular adhesion, which is a prerequisite for accumulation in multilayered cell clusters, was not detected with any mutant. These results demonstrate that the mutants were impaired in the accumulative phase of biofilm production. Mutants M10 and M11 did not produce detectable amounts of a specific polysaccharide antigen (D. Mack, N. Siemssen, and R. Laufs, Infect. Immun. 60:2048-2057, 1992), whereas substantially reduced amounts of antigen were produced by the spontaneous variants. Hexosamine was determined as the major specific component of the antigen enriched by gel filtration of biofilm-producing S. epidermidis 1457 because almost no hexosamine was detected in material prepared from the isogenic biofilm-negative transductant 1457-M11, which differentiates the antigen from other S. epidermidis polysaccharide components. Our results provide direct genetic evidence for a function of the antigen in the accumulative phase of biofilm production by S. epidermidis by mediating intercellular adhesion.
343 citations
"Growing and analyzing static biofil..." refers methods in this paper
...While popularized in the mid-to-late 1990s (Mack et al., 1994; O’Toole et al., 1999), the assay in its typically used form is derived from a protocol published by Christensen et al. (1985)....
[...]