scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Hierarchical assembly of graphene-bridged Ag3PO4/Ag/BiVO4 (040) Z-scheme photocatalyst: An efficient, sustainable and heterogeneous catalyst with enhanced visible-light photoactivity towards tetracycline degradation under visible light irradiation

01 Jan 2017-Applied Catalysis B-environmental (Elsevier)-Vol. 200, pp 330-342
TL;DR: In this paper, a novel graphene-bridged Ag3PO4/Ag/BiVO4 (040) Z-scheme heterojunction with excellent visible-light-driven photocatalytic performance was fabricated using a facile in situ deposition method followed by photo-reduction.
Abstract: A novel graphene-bridged Ag3PO4/Ag/BiVO4 (040) Z-scheme heterojunction with excellent visible-light-driven photocatalytic performance was fabricated using a facile in situ deposition method followed by photo-reduction. The as-obtained nanocomposite was employed to degrade tetracycline (TC) in water under visible light irradiation. Compared to pure BiVO4, Ag3PO4 and other nanocomposites, Ag/Ag3PO4/BiVO4/RGO displayed more superior photodegradation efficiency with 94.96% removal of TC (10 mg/L) in 60 min, where the optimal conditions was catalysis dosage 0.50 g/L and initial pH at ca. 6.75. The influences of TC concentrations, light irradiation condition, coexistence ions and water sources were also investigated in details. The enhanced photocatalytic activities could be attributed to the suppression of charge recombination, high specific surface area and desirable absorption capability of Ag/Ag3PO4/BiVO4/RGO, which were in sequence confirmed by PL, PC, EIS, BET and DRS tests. The synergistic effects of RGO and Ag/Ag3PO4 in the hybrid could also contribute to the improved photo-stability and recyclability towards TC decomposition. In addition, radical trapping experiments and ESR measurement revealed that the photo-induced active species superoxide radical ( O2−) and holes (h+) were the predominant active species in the photocatalytic system. The Ag/Ag3PO4/BiVO4/RGO nanocomposite also possessed desirable photocatalytic performance on the degradation of TC from real wastewater, further verifying its potential in practical industries. This work provides a promising approach to construct visible-light response and more stabilized nanocomposite photocatalysts applied in efficient treatment of persistent pollutants in wastewater.
Citations
More filters
Journal ArticleDOI
01 Jun 2018
TL;DR: Comparing the performance of three Fe-based metal-organic frameworks in removing tetracycline showed that Fe-MIL-101 exhibited the best performance, and it was found that the adsorption and photocatalytic degradation effect was better with the increase of time, and the removal efficiency decreased with the increasing of initial tetrACYcline concentrations.
Abstract: Recently, Fe-based metal–organic frameworks (MOFs) have attracted increasing attention and been widely used. To date, however, it is unknown whether they can be employed to degrade tetracycline, one of the most widely used antibiotics. This work therefore aims to provide such support by comparing the performance of three Fe-based MOFs (namely, Fe-MIL-101, Fe-MIL-100, and Fe-MIL-53) in removing tetracycline. Experimental results showed that Fe-MIL-101 exhibited the best performance in tetracycline removal, with 96.6% of tetracycline being removed (initial tetracycline concentration at 50 mg/L) while Fe-MIL-100 and Fe-MIL-53 removed 57.4% and 40.6% under the same conditions. Additionally, the effects of adding dosage, adsorption time, and initial concentration of tetracycline on degradation efficiency were examined. It was found that the adsorption and photocatalytic degradation effect was better with the increase of time, the optimum dosage of Fe-MIL-101 was 0.5 g/L and the removal efficiency decreased with the increasing of initial tetracycline concentrations. Moreover, the trapping experiments and ESR tests indicated that O2−, OH and h+ were the main active species in photocatalytic degradation process of tetracycline. Due to its high removal efficiency and simple synthesis, it could be used as a potential catalyst for degradation of tetracycline and other antibiotics.

497 citations

Journal ArticleDOI
TL;DR: In this article, a facile synthesized porous graphitic carbon with microtubular structure, high graphitization degree and abundant porosity demonstrates an outstanding advantage of excellent conductivity and facilitated mass transport.
Abstract: The preparation processes of efficient photocatalyst containing defect regulation and heterostructure construction are usually complicated and difficult to control at present, besides, the catalyst agglomeration in solution further limits their application. There is an urgent need for designing a potentially cheap, efficient, sustainable and easy-prepared nanocomposite to improve photocatalytic performance. In present study, the facile synthesized porous graphitic carbon with microtubular structure, high graphitization degree and abundant porosity demonstrates an outstanding advantage of excellent conductivity and facilitated mass transport. Such porous graphite biochar (PGBC) self-assembled with g-MoS2 nanosheets is observed by the optimized band gap, enhanced visible light harvesting, accelerated charge transfer and efficient photo-generated carrier’s separation. Considering the favorable specific surface area and pore distribution of PGBC for avoiding nanosheet agglomeration, the as-prepared composites display quite high efficiency for tetracycline hydrochloride (TC) removal based on the synergistic action of the desirable absorption and photocatalytic capability. Mechanism exploration indicates that surface adsorption is mainly dominated by electrostatic interaction, hydrogen bonding, π-π stacking and pore-filling, and hole (h+) and hydroxyl radical (·OH) are the predominant active species responsible for TC degradation. Furthermore, the nanocomposites possess advisable stability performance for TC removal in contaminated river water, further providing an underlying insight for establishing high-efficient and easy-prepared photocatalysts in practical contaminated water remediation.

494 citations

Journal ArticleDOI
TL;DR: In this article, the photocatalytic activity of CuS/BiVO4 composites for Ciprofloxacin (CIP) removal was examined under visible light irradiation.

389 citations

Journal ArticleDOI
TL;DR: A novel heterostructured photocatalyst AgI/BiVO4 was synthesized by an in situ precipitation procedure that exhibited excellent photoactivity for the refractory pollutant (tetracycline) decomposition under visible light illumination and efficiently accelerated photoinduced electron-hole pairs' separation and improved the efficiency of TC degradation.
Abstract: Recently, visible-light-driven photocatalysis is of great interest in the environmental pollutant remediation. In the present study, a novel heterostructured photocatalyst AgI/BiVO4 was synthesized by an in situ precipitation procedure. The AgI/BiVO4 heterojunctions exhibited excellent photoactivity for the refractory pollutant (tetracycline (TC), a typical antibiotic) decomposition under visible light illumination. The synthetic sample with 1:4 mass ratio of AgI:BiVO4 possessed the highest photocatalytic performance in all of the as-prepared catalysts. The TC molecules were substantially eliminated (94.91%) within 60 min, and degradation efficiency was considerably better than those of bare BiVO4 (62.68%) and AgI (75.43%) under identical conditions. Simultaneously, 90.46% of TOC removal was also achieved within 120 min, suggesting that the mineralization was superior and further confirmed by three-dimensional excitation–emission matrix fluorescence spectroscopy (3D EEMs). The XRD, XPS, DRS, and PL measur...

388 citations

Journal ArticleDOI
TL;DR: In this paper, a review summarizes the recent advances of graphitic carbon nitride (g-C3N4) based nanocomposites modified with transition metal sulfide (TMS), including preparation of pristine g-C 3N4, modification strategies of g-c3n4, design principles of TMS-modified g-n4 heterostructured photocatalysts, and applications in energy conversion.

386 citations

References
More filters
Journal ArticleDOI
TL;DR: The U.S. Geological Survey used five newly developed analytical methods to measure concentrations of 95 organic wastewater contaminants (OWCs) in water samples from a network of 139 streams across 30 states during 1999 and 2000 as mentioned in this paper.
Abstract: To provide the first nationwide reconnaissance of the occurrence of pharmaceuticals, hormones, and other organic wastewater contaminants (OWCs) in water resources, the U.S. Geological Survey used five newly developed analytical methods to measure concentrations of 95 OWCs in water samples from a network of 139 streams across 30 states during 1999 and 2000. The selection of sampling sites was biased toward streams susceptible to contamination (i.e. downstream of intense urbanization and livestock production). OWCs were prevalent during this study, being found in 80% of the streams sampled. The compounds detected represent a wide range of residential, industrial, and agricultural origins and uses with 82 of the 95 OWCs being found during this study. The most frequently detected compounds were coprostanol (fecal steroid), cholesterol (plant and animal steroid), N,N-diethyltoluamide (insect repellant), caffeine (stimulant), triclosan (antimicrobial disinfectant), tri(2-chloroethyl)phosphate (fire retardant), and 4-nonylphenol (nonionic detergent metabolite). Measured concentrations for this study were generally low and rarely exceeded drinking-water guidelines, drinking-water health advisories, or aquatic-life criteria. Many compounds, however, do not have such guidelines established. The detection of multiple OWCs was common for this study, with a median of seven and as many as 38 OWCs being found in a given water sample. Little is known about the potential interactive effects (such as synergistic or antagonistic toxicity) that may occur from complex mixtures of OWCs in the environment. In addition, results of this study demonstrate the importance of obtaining data on metabolites to fully understand not only the fate and transport of OWCs in the hydrologic system but also their ultimate overall effect on human health and the environment.

7,036 citations

Journal ArticleDOI
TL;DR: This critical review summarizes the recent progress in the design and fabrication of graphene-based semiconductor photocatalysts via various strategies including in situ growth, solution mixing, hydrothermal and/or solvothermal methods.
Abstract: Graphene, a single layer of graphite, possesses a unique two-dimensional structure, high conductivity, superior electron mobility and extremely high specific surface area, and can be produced on a large scale at low cost. Thus, it has been regarded as an important component for making various functional composite materials. Especially, graphene-based semiconductor photocatalysts have attracted extensive attention because of their usefulness in environmental and energy applications. This critical review summarizes the recent progress in the design and fabrication of graphene-based semiconductor photocatalysts via various strategies including in situ growth, solution mixing, hydrothermal and/or solvothermal methods. Furthermore, the photocatalytic properties of the resulting graphene-based composite systems are also discussed in relation to the environmental and energy applications such as photocatalytic degradation of pollutants, photocatalytic hydrogen generation and photocatalytic disinfection. This critical review ends with a summary and some perspectives on the challenges and new directions in this emerging area of research (158 references).

2,451 citations

Journal ArticleDOI
TL;DR: The compilation of sorption coefficients to soil solids (Kd,solid) demonstrates that these chemicals display a wide range of mobility, and suggests that mechanisms other than hydrophobic partitioning play a significant role in sorption of VPs.
Abstract: Veterinary pharmaceuticals (VPs) are used in large amounts in modern husbandry. Due to their use pattern, they possess a potential for reaching the soil environment. To assess their mobility in soil, the literature on sorption of chemicals used as VPs is reviewed and put into perspective of their physicochemical properties. The compilation of sorption coefficients to soil solids (Kd,solid) demonstrates that these chemicals display a wide range of mobility (0.2 < Kd,solid < 6,000 L/kg). Partition coefficients for association of tetracycline and quinolone carboxylic acid VPs to dissolved organic matter (Kd,DOM) vary between 100 and 50,000 L/kg. The variation in Kd,solid for a given compound in different soils can be significant. For most of the compounds, the variation is not considerably lower for the organic carbon-normalized sorption coefficient Koc. In addition, prediction of log Koc by log Kow leads to significant underestimation of log Koc and log Kd,DOM values. This suggests that mechanisms other than hydrophobic partitioning play a significant role in sorption of VPs. A number of hydrophobicity-independent mechanisms such as cation exchange, cation bridging at clay surfaces, surface complexation, and hydrogen bonding appear to be involved. These processes are not accounted for by organic carbon normalization, suggesting that this data treatment is conceptually inappropriate and fails to describe the sorption behavior. Moreover, prediction of log Koc based on the hydrophobicity parameter log Kow is not successful.

1,290 citations

Journal ArticleDOI
TL;DR: A widespread occurrence of antibiotics and ARGs in urban and hospital wastewater and how these effluents, even after treatment, contribute to the spread of these emerging pollutants in the aquatic environment is demonstrated.

1,131 citations

Journal ArticleDOI
TL;DR: The work found a new application of the photocatalyst, Ag3PO4/g-C3N4, in simultaneous environmental protection and energy production.
Abstract: This research was designed for the first time to investigate the activities of photocatalytic composite, Ag3PO4/g-C3N4, in converting CO2 to fuels under simulated sunlight irradiation. The composite was synthesized using a simple in situ deposition method and characterized by various techniques including Brunauer–Emmett–Teller method (BET), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectroscopy (DRS), photoluminescence spectroscopy (PL), and an electrochemical method. Thorough investigation indicated that the composite consisted of Ag3PO4, Ag, and g-C3N4. The introduction of Ag3PO4 on g-C3N4 promoted its light absorption performance. However, more significant was the formation of heterojunction structure between Ag3PO4 and g-C3N4, which efficiently promoted the separation of electron–hole pairs by a Z-scheme mechanism and ultimately ...

794 citations