Highly Selective CO 2 Electroreduction to CH 4 by In Situ Generated Cu 2 O Single-Type Sites on a Conductive MOF: Stabilizing Key Intermediates with Hydrogen Bonding
TL;DR: Operando infrared spectroscopy and density functional theory (DFT) calculations reveal that the key intermediates involved in the formation CH 4 pathway are stabilized by the single active Cu 2 O(111) and hydrogen bonding, thus generating CH 4 instead of CO.
Abstract: It is still a great challenge to achieve high selectivity of CH4 in CO2 electroreduction reactions (CO2 RR) because of the similar reduction potentials of possible products and the sluggish kinetics for CO2 activation. Stabilizing key reaction intermediates by single type of active sites supported on porous conductive material is crucial to achieve high selectivity for single product such as CH4 . Here, Cu2 O(111) quantum dots with an average size of 3.5 nm are in situ synthesized on a porous conductive copper-based metal-organic framework (CuHHTP), exhibiting high selectivity of 73 % towards CH4 with partial current density of 10.8 mA cm-2 at -1.4 V vs. RHE (reversible hydrogen electrode) in CO2 RR. Operando infrared spectroscopy and DFT calculations reveal that the key intermediates (such as *CH2 O and *OCH3 ) involved in the pathway of CH4 formation are stabilized by the single active Cu2 O(111) and hydrogen bonding, thus generating CH4 instead of CO.
Citations
More filters
Posted Content•
TL;DR: In this article, the authors discuss strategies to achieve high C2+ selectivity through rational design of the catalyst and electrolyte, focusing on findings extracted from in situ and operando characterizations.
Abstract: CO2 electroreduction reaction (CO2RR) to fuels and feedstocks is an attractive route to close the anthropogenic carbon cycle and store renewable energy. The generation of more reduced chemicals, especially multicarbon oxygenate and hydrocarbon products (C2+) with higher energy density is highly desirable for industrial applications. However, selective conversion of CO2 to C2+ suffers from high overpotential, low reaction rate and low selectivity, and the process is extremely sensitive to the catalyst structure and electrolyte. Here we discuss strategies to achieve high C2+ selectivity through rational design of the catalyst and electrolyte. Current state-of-the-art catalysts, including Cu and Cu-bimetallic catalysts as well as alternative materials are considered. The importance of taking into consideration the dynamic evolution of the catalyst structure and composition are highlighted, focusing on findings extracted from in situ and operando characterizations. Additional theoretical insight into the reaction mechanisms underlying the improved C2+ selectivity of specific catalyst geometries/compositions in synergy with a well-chosen electrolyte are also provided.
259 citations
TL;DR: The mixed-linker-based multivariate metal-organic frameworks are synthesized employing various systematic strategies which include Linker-Directed Vertex De-symmetrization, Random Mixed-Linker Distribution, covalent pre-and post-synthetic modification techniques, etc as discussed by the authors.
164 citations
TL;DR: In this article, a conductive two-dimensional (2D) phthalocyanine-based MOF (NiPc-NiO4 ) nanosheets linked by nickel-catecholate was proposed for the CO2 electroreduction reaction (CO2 RR) to CO.
Abstract: The electrocatalytic conversion of CO2 into value-added chemicals is a promising approach to realize a carbon-energy balance. However, low current density still limits the application of the CO2 electroreduction reaction (CO2 RR). Metal-organic frameworks (MOFs) are one class of promising alternatives for the CO2 RR due to their periodically arranged isolated metal active sites. However, the poor conductivity of traditional MOFs usually results in a low current density in CO2 RR. We have prepared conductive two-dimensional (2D) phthalocyanine-based MOF (NiPc-NiO4 ) nanosheets linked by nickel-catecholate, which can be employed as highly efficient electrocatalysts for the CO2 RR to CO. The obtained NiPc-NiO4 has a good conductivity and exhibited a very high selectivity of 98.4 % toward CO production and a large CO partial current density of 34.5 mA cm-2 , outperforming the reported MOF catalysts. This work highlights the potential of conductive crystalline frameworks in electrocatalysis.
158 citations
TL;DR: In this paper, a metal-organic framework composed of 2,3,9,10,16,17,23,24-octahydroxyphthalo-cyaninato)copper(II) (PcCu-(OH)8) ligands and the square-planar CuO4 nodes was proposed as the electrocatalyst for CO2 to C2H4.
Abstract: Conversion from CO2 to C2H4 is important for the development of energy and the environment, but the high energy barrier of hydrogenation of the *CO intermediate and C-C coupling step tend to result in C1 compounds as the main product and thus restrict the generation of C2H4. Here, we report a metal-organic framework (denoted as PcCu-Cu-O), composed of 2,3,9,10,16,17,23,24-octahydroxyphthalo-cyaninato)copper(II) (PcCu-(OH)8) ligands and the square-planar CuO4 nodes, as the electrocatalyst for CO2 to C2H4. Compared with the discrete molecular copper-phthalocyanine (Faradaic efficiency (FE) of C2H4 = 25%), PcCu-Cu-O exhibits much higher performance for electrocatalytic reduction of CO2 to C2H4 with a FE of 50(1)% and a current density of 7.3 mA cm-2 at the potential of -1.2 V vs RHE in 0.1 M KHCO3 solution, representing the best performance reported to date. In-situ infrared spectroscopy and control experiments suggested that the enhanced electrochemical performance may be ascribed to the synergistic effect between the CuPc unit and the CuO4 unit, namely the CO on the CO-producing site (CuO4 site) can efficiently migrate and dimerize with the *CO intermediate adsorbed on the C2H4-producing site (CuPc), giving a lower C-C dimerization energy barrier.
152 citations
TL;DR: In this article, metal-organic frameworks (MOFs) of cuprous oxide (Cu2 O) nanowires are encapsulated by metalorganic frameworks of Cu3 (BTC)2 (BTC=1,3,5-benzene tricarboxylate) using a surfactant-free method, which not only suppress the water vapor-induced corrosion of Cu2 O but also facilitate charge separation and CO2 uptake.
Abstract: Improving the stability of cuprous oxide (Cu2 O) is imperative to its practical applications in artificial photosynthesis. In this work, Cu2 O nanowires are encapsulated by metal-organic frameworks (MOFs) of Cu3 (BTC)2 (BTC=1,3,5-benzene tricarboxylate) using a surfactant-free method. Such MOFs not only suppress the water vapor-induced corrosion of Cu2 O but also facilitate charge separation and CO2 uptake, thus resulting in a nanocomposite representing 1.9 times improved activity and stability for selective photocatalytic CO2 reduction into CH4 under mild reaction conditions. Furthermore, direct transfer of photogenerated electrons from the conduction band of Cu2 O to the LUMO level of non-excited Cu3 (BTC)2 has been evidenced by time-resolved photoluminescence. This work proposes an effective strategy for CO2 conversion by a synergy of charge separation and CO2 adsorption, leading to the enhanced photocatalytic reaction when MOFs are integrated with metal oxide photocatalyst.
127 citations
References
More filters
TL;DR: Physical structure is known to contribute to the appearance of bird plumage through structural color and specular reflection, but a third mechanism, structural absorption, leads to low reflectance and super black color in birds of paradise feathers.
Abstract: Many studies have shown how pigments and internal nanostructures generate color in nature. External surface structures can also influence appearance, such as by causing multiple scattering of light (structural absorption) to produce a velvety, super black appearance. Here we show that feathers from five species of birds of paradise (Aves: Paradisaeidae) structurally absorb incident light to produce extremely low-reflectance, super black plumages. Directional reflectance of these feathers (0.05-0.31%) approaches that of man-made ultra-absorbent materials. SEM, nano-CT, and ray-tracing simulations show that super black feathers have titled arrays of highly modified barbules, which cause more multiple scattering, resulting in more structural absorption, than normal black feathers. Super black feathers have an extreme directional reflectance bias and appear darkest when viewed from the distal direction. We hypothesize that structurally absorbing, super black plumage evolved through sensory bias to enhance the perceived brilliance of adjacent color patches during courtship display.
5,916 citations
TL;DR: In vivo generation of mouse models carrying clinically relevant mutations using C→T and A→G editors is demonstrated, making it feasible to model and potentially cure relevant genetic diseases.
Abstract: A recently developed adenine base editor (ABE) efficiently converts A to G and is potentially useful for clinical applications. However, its precision and efficiency in vivo remains to be addressed. Here we achieve A-to-G conversion in vivo at frequencies up to 100% by microinjection of ABE mRNA together with sgRNAs. We then generate mouse models harboring clinically relevant mutations at Ar and Hoxd13, which recapitulates respective clinical defects. Furthermore, we achieve both C-to-T and A-to-G base editing by using a combination of ABE and SaBE3, thus creating mouse model harboring multiple mutations. We also demonstrate the specificity of ABE by deep sequencing and whole-genome sequencing (WGS). Taken together, ABE is highly efficient and precise in vivo, making it feasible to model and potentially cure relevant genetic diseases. CRISPR-based base editors allow for single nucleotide genome editing in a range of organisms. Here the authors demonstrate the in vivo generation of mouse models carrying clinically relevant mutations using C→T and A→G editors.
2,114 citations
TL;DR: Modified Cu electrodes were prepared by annealing Cu foil in air and electrochemically reducing the resulting Cu(2)O layers, which resulted in electrodes whose activities were indistinguishable from those of polycrystalline Cu and a higher level of activity than all previously reported metal electrodes evaluated under comparable conditions.
Abstract: Modified Cu electrodes were prepared by annealing Cu foil in air and electrochemically reducing the resulting Cu2O layers. The CO2 reduction activities of these electrodes exhibited a strong dependence on the initial thickness of the Cu2O layer. Thin Cu2O layers formed by annealing at 130 °C resulted in electrodes whose activities were indistinguishable from those of polycrystalline Cu. In contrast, Cu2O layers formed at 500 °C that were ≥ ∼3 μm thick resulted in electrodes that exhibited large roughness factors and required 0.5 V less overpotential than polycrystalline Cu to reduce CO2 at a higher rate than H2O. The combination of these features resulted in CO2 reduction geometric current densities >1 mA/cm2 at overpotentials <0.4 V, a higher level of activity than all previously reported metal electrodes evaluated under comparable conditions. Moreover, the activity of the modified electrodes was stable over the course of several hours, whereas a polycrystalline Cu electrode exhibited deactivation within...
1,619 citations
TL;DR: In this paper, the role of the two different catalytic sites of pure cobalt and coexisting domains of cobalt metal and cobalt oxide has been evaluated, showing that surface cobalt atoms of the atomically thin layers have higher intrinsic activity and selectivity towards formate production, at lower overpotentials.
Abstract: Electroreduction of CO2 into useful fuels, especially if driven by renewable energy, represents a potentially 'clean' strategy for replacing fossil feedstocks and dealing with increasing CO2 emissions and their adverse effects on climate. The critical bottleneck lies in activating CO2 into the CO2(•-) radical anion or other intermediates that can be converted further, as the activation usually requires impractically high overpotentials. Recently, electrocatalysts based on oxide-derived metal nanostructures have been shown to enable CO2 reduction at low overpotentials. However, it remains unclear how the electrocatalytic activity of these metals is influenced by their native oxides, mainly because microstructural features such as interfaces and defects influence CO2 reduction activity yet are difficult to control. To evaluate the role of the two different catalytic sites, here we fabricate two kinds of four-atom-thick layers: pure cobalt metal, and co-existing domains of cobalt metal and cobalt oxide. Cobalt mainly produces formate (HCOO(-)) during CO2 electroreduction; we find that surface cobalt atoms of the atomically thin layers have higher intrinsic activity and selectivity towards formate production, at lower overpotentials, than do surface cobalt atoms on bulk samples. Partial oxidation of the atomic layers further increases their intrinsic activity, allowing us to realize stable current densities of about 10 milliamperes per square centimetre over 40 hours, with approximately 90 per cent formate selectivity at an overpotential of only 0.24 volts, which outperforms previously reported metal or metal oxide electrodes evaluated under comparable conditions. The correct morphology and oxidation state can thus transform a material from one considered nearly non-catalytic for the CO2 electroreduction reaction into an active catalyst. These findings point to new opportunities for manipulating and improving the CO2 electroreduction properties of metal systems, especially once the influence of both the atomic-scale structure and the presence of oxide are mechanistically better understood.
1,407 citations
TL;DR: This review provides a comprehensive account of significant progress in the design and synthesis of MOF-based materials, including MOFs, MOF composites and MOF derivatives, and their application to carbon capture and conversion.
Abstract: Rapidly increasing atmospheric CO2 concentrations threaten human society, the natural environment, and the synergy between the two. In order to ameliorate the CO2 problem, carbon capture and conversion techniques have been proposed. Metal–organic framework (MOF)-based materials, a relatively new class of porous materials with unique structural features, high surface areas, chemical tunability and stability, have been extensively studied with respect to their applicability to such techniques. Recently, it has become apparent that the CO2 capture capabilities of MOF-based materials significantly boost their potential toward CO2 conversion. Furthermore, MOF-based materials’ well-defined structures greatly facilitate the understanding of structure–property relationships and their roles in CO2 capture and conversion. In this review, we provide a comprehensive account of significant progress in the design and synthesis of MOF-based materials, including MOFs, MOF composites and MOF derivatives, and their application to carbon capture and conversion. Special emphases on the relationships between CO2 capture capacities of MOF-based materials and their catalytic CO2 conversion performances are discussed.
1,378 citations