Highly Sensitive Surface Plasmon Resonance Based D-Shaped Photonic Crystal Fiber Refractive Index Sensor
TL;DR: In this article, a D-shaped photonic crystal fiber based surface plasmon resonance sensor is proposed for refractive index sensing, and a very high average sensitivity of 7700nm/RIU with the resolution of 1.30 × 10−5 RIU is obtained for the analyte of different refractive indices.
Abstract: In this article, a D-shaped photonic crystal fiber based surface plasmon resonance sensor is proposed for refractive index sensing. Surface plasmon resonance effect between surface plasmon polariton modes and fiber core modes of the designed D-shaped photonic crystal fiber is used to measure the refractive index of the analyte. By using finite element method, the sensing properties of the proposed sensor are investigated, and a very high average sensitivity of 7700 nm/RIU with the resolution of 1.30 × 10−5 RIU is obtained for the analyte of different refractive indices varies from 1.43 to 1.46. In the proposed sensor, the analyte and coating of gold are placed on the plane surface of the photonic crystal fiber, hence there is no necessity of the filling of voids, thus it is gentle to apply and easy to use.
Citations
More filters
TL;DR: In this article, the development of highly sensitive miniaturized sensors that allow real-time quantification of analytes is highly desirable in medical diagnostics, veterinary testing, food safety, and environmental monitoring.
Abstract: The development of highly-sensitive miniaturized sensors that allow real-time quantification of analytes is highly desirable in medical diagnostics, veterinary testing, food safety, and environmental monitoring. Photonic Crystal Fiber Surface Plasmon Resonance (PCF SPR) has emerged as a highly-sensitive portable sensing technology for testing chemical and biological analytes. PCF SPR sensing combines the advantages of PCF technology and plasmonics to accurately control the evanescent field and light propagation properties in single or multimode configurations. This review discusses fundamentals and fabrication of fiber optic technologies incorporating plasmonic coatings to rationally design, optimize and construct PCF SPR sensors as compared to conventional SPR sensing. PCF SPR sensors with selective metal coatings of fibers, silver nanowires, slotted patterns, and D-shaped structures for internal and external microfluidic flows are reviewed. This review also includes potential applications of PCF SPR sensors, identifies perceived limitations, challenges to scaling up, and provides future directions for their commercial realization.
273 citations
TL;DR: This is the first comprehensive review on methods and materials for use in optical sensing of pH values and on applications of such sensors.
Abstract: This is the first comprehensive review on methods and materials for use in optical sensing of pH values and on applications of such sensors. The Review starts with an introduction that contains subsections on the definition of the pH value, a brief look back on optical methods for sensing of pH, on the effects of ionic strength on pH values and pKa values, on the selectivity, sensitivity, precision, dynamic ranges, and temperature dependence of such sensors. Commonly used optical sensing schemes are covered in a next main chapter, with subsections on methods based on absorptiometry, reflectometry, luminescence, refractive index, surface plasmon resonance, photonic crystals, turbidity, mechanical displacement, interferometry, and solvatochromism. This is followed by sections on absorptiometric and luminescent molecular probes for use pH in sensors. Further large sections cover polymeric hosts and supports, and methods for immobilization of indicator dyes. Further and more specific sections summarize the state of the art in materials with dual functionality (indicator and host), nanomaterials, sensors based on upconversion and 2-photon absorption, multiparameter sensors, imaging, and sensors for extreme pH values. A chapter on the many sensing formats has subsections on planar, fiber optic, evanescent wave, refractive index, surface plasmon resonance and holography based sensor designs, and on distributed sensing. Another section summarizes selected applications in areas, such as medicine, biology, oceanography, bioprocess monitoring, corrosion studies, on the use of pH sensors as transducers in biosensors and chemical sensors, and their integration into flow-injection analyzers, microfluidic devices, and lab-on-a-chip systems. An extra section is devoted to current challenges, with subsections on challenges of general nature and those of specific nature. A concluding section gives an outlook on potential future trends and perspectives.
233 citations
TL;DR: In this paper, the progress made in the area of plasmonics-based fiber optic sensors during the last decade (2007-2017) has been summarized in order to widen the scope of the work.
137 citations
TL;DR: In this article, a two-layer circular lattice photonic crystal fiber (PCF) biosensor based on the principle of surface plasmon resonance (SPR) was numerically demonstrated.
Abstract: In this paper, we numerically demonstrate a two-layer circular lattice photonic crystal fiber (PCF) biosensor based on the principle of surface plasmon resonance (SPR). The finite element method (FEM) with circular perfectly matched layer (PML) boundary condition is applied to evaluate the performance of the proposed sensor. A thin gold layer is deposited outside the PCF structure, which acts as the plasmonic material for this design. The sensing layer (analyte) is implemented in the outermost layer, which permits easy and more practical fabrication process compared to analyte is put inside the air holes. It is demonstrated that, at gold layer thickness of 40 nm, the proposed sensor shows maximum sensitivity of 2200 nm/RIU using the wavelength interrogation method in the sensing range between 1.33–1.36. Besides, using an amplitude interrogation method, a maximum sensitivity of 266 RIU−1 and a maximum sensor resolution of 3.75 × 10−5 RIU are obtained. We also discuss how phase matching points are varied with different fiber parameters. Owing to high sensitivity and simple design, the proposed sensor may find important applications in biochemical and biological analyte detection.
126 citations
Cites background from "Highly Sensitive Surface Plasmon Re..."
...55 × 10−5, which is comparable with [8,12,16,18,28]....
[...]
...Another hexagonal lattice D-shaped PCF sensor, where a gold layer was deposited on the flat surface to obtain SPR phenomena, has been proposed [16]....
[...]
TL;DR: In this paper, a high-resolution D-shaped photonic crystal fiber (PCF) surface plasmon resonance (SPR) sensor based on gold grating is introduced to modulate the resonance wavelength and enhance the refractive index sensitivity.
Abstract: In this work, we proposed a high-resolution D-shaped photonic crystal fiber (PCF) surface plasmon resonance (SPR) sensor based on gold grating. Gold grating is introduced to modulate the resonance wavelength and enhance the refractive index (RI) sensitivity. Structure parameters of PCF and gold grating are analyzed by the finite element method for optimizing the SPR sensor. The simulation results indicate that air hole pitch, air hole diameter, and gold thickness and grating constant have little influence on the sensitivity of the refractive index, which reduces the requirement of precise processing. For improving the resolution of RI sensing, a two-feature (2F) interrogation method, which combines wavelength interrogation and amplitude interrogation, is used. The maximum theoretical resolution of the SPR sensor reaches to 5.98×10-6 RIU in the range of 1.36-1.38, and the wavelength sensitivity reaches to 3340 nm/RIU. The proposed SPR sensor shows potential applications for developing a high-sensitivity, real-time, and fast-response SPR-RI sensor.
113 citations
References
More filters
TL;DR: In this paper, the optical constants for the noble metals (copper, silver, and gold) from reflection and transmission measurements on vacuum-evaporated thin films at room temperature, in the spectral range 0.5-6.5 eV.
Abstract: The optical constants $n$ and $k$ were obtained for the noble metals (copper, silver, and gold) from reflection and transmission measurements on vacuum-evaporated thin films at room temperature, in the spectral range 0.5-6.5 eV. The film-thickness range was 185-500 \AA{}. Three optical measurements were inverted to obtain the film thickness $d$ as well as $n$ and $k$. The estimated error in $d$ was \ifmmode\pm\else\textpm\fi{} 2 \AA{}, and that in $n$, $k$ was less than 0.02 over most of the spectral range. The results in the film-thickness range 250-500 \AA{} were independent of thickness, and were unchanged after vacuum annealing or aging in air. The free-electron optical effective masses and relaxation times derived from the results in the near infrared agree satisfactorily with previous values. The interband contribution to the imaginary part of the dielectric constant was obtained by subtracting the free-electron contribution. Some recent theoretical calculations are compared with the results for copper and gold. In addition, some other recent experiments are critically compared with our results.
17,509 citations
TL;DR: Main application areas are outlined and examples of applications of SPR sensor technology are presented and future prospects of SPR technology are discussed.
Abstract: Since the first application of the surface plasmon resonance (SPR) phenomenon for sensing almost two decades ago, this method has made great strides both in terms of instrumentation development and applications. SPR sensor technology has been commercialized and SPR biosensors have become a central tool for characterizing and quantifying biomolecular interactions. This paper attempts to review the major developments in SPR technology. Main application areas are outlined and examples of applications of SPR sensor technology are presented. Future prospects of SPR sensor technology are discussed.
5,127 citations
"Highly Sensitive Surface Plasmon Re..." refers background in this paper
...Figure 2 shows the resonance spectrum and the electric field distribution of the fundamental core guided mode, SPP mode, and the coupling mode at the analyte having RI na = 1.44. In Fig. 2a, the blue line shows the real part of the effective index (Re(neff)), green line represents the SPP mode neff and pink line shows the Im(neff) of the y-polarized fundamental core mode. At the resonant wavelength (1.23 μm), the effective index of the core guided fundamental mode and SPP mode coincide, and at this wavelength a sharp loss peak is observed. This shows Fig. 1 Cross section of the proposed D-shaped photonic crystal fiber 1368 Plasmonics (2017) 12:1367–1372...
[...]
TL;DR: The surface plasmon resonance (SPR) is a new optical technique in the field of chemical sensing as discussed by the authors, which can be used for gas detection, together with results from exploratory experiments with relevance to biosensing.
2,243 citations
TL;DR: In this paper, a fiber-optic chemical sensor is presented which utilizes surface plasmon resonance excitation, which is fabricated by removing a section of the fiber cladding and symmetrically depositing a thin layer of highly reflecting metal onto the fiber core.
Abstract: A fiber-optic chemical sensor is presented which utilizes surface plasmon resonance excitation The sensing element of the fiber has been fabricated by removing a section of the fiber cladding and symmetrically depositing a thin layer of highly reflecting metal onto the fiber core A white-light source is used to introduce a range of wavelengths into the fiber optic Changes in the sensed parameters (eg, bulk refractive index, film thinkness and film refractive index) are determined by measuring the transmitted spectral-intensity distribution Experimental results of the sensitivity and the dynamic range in the measurement of the refractive indices of aqueous solutions are in agreement with the theoretical model of the sensor
1,145 citations
TL;DR: The present review may provide researchers valuable information regarding fiber optic SPR sensors and encourage them to take this area for further research and development.
Abstract: Surface plasmon resonance technique in collaboration with optical fiber technology has brought tremendous advancements in sensing of various physical, chemical, and biochemical parameters. In this review article, we present the principle of SPR technique for sensing and various designs of the fiber optic SPR probe reported for the enhancement of the sensitivity of the sensor. In addition, we present few examples of the surface plasmon resonance- (SPR-) based fiber optic sensors. The present review may provide researchers valuable information regarding fiber optic SPR sensors and encourage them to take this area for further research and development.
418 citations