Holey Reduced Graphene Oxide Coupled with an Mo2N–Mo2C Heterojunction for Efficient Hydrogen Evolution
TL;DR: The hybrid exhibits superior activity towards the hydrogen evolution reaction with low onset potentials of 11 mV (0.5 m H2 SO4 ) and 18mV (1 m KOH) as well as remarkable stability.
Abstract: An in situ catalytic etching strategy is developed to fabricate holey reduced graphene oxide along with simultaneous coupling with a small-sized Mo2 N-Mo2 C heterojunction (Mo2 N-Mo2 C/HGr). The method includes the first immobilization of H3 PMo12 O40 (PMo12 ) clusters on graphite oxide (GO), followed by calcination in air and NH3 to form Mo2 N-Mo2 C/HGr. PMo12 not only acts as the Mo heterojunction source, but also provides the Mo species that can in situ catalyze the decomposition of adjacent reduced GO to form HGr, while the released gas (CO) and introduced NH3 simultaneously react with the Mo species to form an Mo2 N-Mo2 C heterojunction on HGr. The hybrid exhibits superior activity towards the hydrogen evolution reaction with low onset potentials of 11 mV (0.5 m H2 SO4 ) and 18 mV (1 m KOH) as well as remarkable stability. The activity in alkaline media is also superior to Pt/C at large current densities (>88 mA cm-2 ). The good activity of Mo2 N-Mo2 C/HGr is ascribed to its small size, the heterojunction of Mo2 N-Mo2 C, and the good charge/mass-transfer ability of HGr, as supported by a series of experiments and theoretical calculations.
Citations
More filters
TL;DR: The fundamentals of HER are summarized and the recent state-of-the-art advances in the low-cost and high-performance catalysts based on noble and non-noble metals, as well as metal-free HER electrocatalysts are reviewed.
Abstract: Hydrogen fuel is considered as the cleanest renewable resource and the primary alternative to fossil fuels for future energy supply. Sustainable hydrogen generation is the major prerequisite to realize future hydrogen economy. The electrocatalytic hydrogen evolution reaction (HER), as the vital step of water electrolysis to H2 production, has been the subject of extensive study over the past decades. In this comprehensive review, we first summarize the fundamentals of HER and review the recent state-of-the-art advances in the low-cost and high-performance catalysts based on noble and non-noble metals, as well as metal-free HER electrocatalysts. We systemically discuss the insights into the relationship among the catalytic activity, morphology, structure, composition, and synthetic method. Strategies for developing an effective catalyst, including increasing the intrinsic activity of active sites and/or increasing the number of active sites, are summarized and highlighted. Finally, the challenges, perspectives, and research directions of HER electrocatalysis are featured.
1,387 citations
TL;DR: Recent research progress on the support and interface effects in HER, OER, and overall water-splitting electrocatalysts is highlighted and the correlation between the electronic interaction of the constituent components and the electrocatalyst performance is profoundly discussed.
Abstract: Water-splitting electrolyzers that can convert electricity into storable hydrogen are a fascinating and scalable energy conversion technology for the utilization of renewable energies. To speed up the sluggish hydrogen and oxygen evolution reactions (HER and OER), electrocatalysts are essential for reducing their kinetic energy barriers and eventually improving the energy conversion efficiency. As efficient strategies for modulating the binding ability of water-splitting intermediates on electrocatalyst surface, the support effect and interface effect are drawing growing attention. Herein, some of the recent research progress on the support and interface effects in HER, OER, and overall water-splitting electrocatalysts is highlighted. Specifically, the correlation between the electronic interaction of the constituent components and the electrocatalytic water-splitting performance of electrocatalysts is profoundly discussed, with the aim of advancing the development of highly efficient water-splitting electrocatalysts, which may eventually replace the noble-metal-based electrocatalysts and bring the practically widespread utilization of water-splitting electrolyzers into a reality.
519 citations
TL;DR: In this article, the state-of-the-art progress on MXene theory, materials synthesis techniques, morphology modifications, opto-electro-magnetic properties, and their applications are comprehensively discussed.
502 citations
TL;DR: The most up-to-date progress on TMN-based nanomaterials is comprehensively reviewed, focusing on geometric-st structure design, electronic-structure engineering, and applications in electrochemical energy conversion and storage, including electrocatalysis, supercapacitors, and rechargeable batteries.
Abstract: Transition metal nitrides (TMNs), by virtue of their unique electronic structure, high electrical conductivity, superior chemical stability, and excellent mechanical robustness, have triggered tremendous research interest over the past decade, and showed great potential for electrochemical energy conversion and storage. However, bulk TMNs usually suffer from limited numbers of active sites and sluggish ionic kinetics, and eventually ordinary electrochemical performance. Designing nanostructured TMNs with tailored morphology and good dispersity has proved an effective strategy to address these issues, which provides a larger specific surface area, more abundant active sites, and shorter ion and mass transport distances over the bulk counterparts. Herein, the most up-to-date progress on TMN-based nanomaterials is comprehensively reviewed, focusing on geometric-structure design, electronic-structure engineering, and applications in electrochemical energy conversion and storage, including electrocatalysis, supercapacitors, and rechargeable batteries. Finally, we outline the future challenges of TMN-based nanomaterials and their possible research directions beyond electrochemical energy applications.
461 citations
TL;DR: Specific nanostructures and carbon-based hybrids are introduced to increase active-site abundance and to promote mass transportation, and heteroatom doping and heterointerface engineering are encouraged to optimize the chemical configurations of active sites toward intrinsically boosted HER kinetics.
Abstract: As the key of hydrogen economy, electrocatalytic hydrogen evolution reactions (HERs) depend on the availability of cost-efficient electrocatalysts. Over the past years, there is a rapid rise in noble-metal-free electrocatalysts. Among them, transition metal carbides (TMCs) are highlighted due to their structural and electronic merits, e.g., high conductivity, metallic band states, tunable surface/bulk architectures, etc. Herein, representative efforts and progress made on TMCs are comprehensively reviewed, focusing on the noble-metal-like electronic configuration and the relevant structural/electronic modulation. Briefly, specific nanostructures and carbon-based hybrids are introduced to increase active-site abundance and to promote mass transportation, and heteroatom doping and heterointerface engineering are encouraged to optimize the chemical configurations of active sites toward intrinsically boosted HER kinetics. Finally, a perspective on the future development of TMC electrocatalysts is offered. The overall aim is to shed some light on the exploration of emerging materials in energy chemistry.
459 citations
References
More filters
TL;DR: This review analyzes recent trends in graphene research and applications, and attempts to identify future directions in which the field is likely to develop.
Abstract: Graphene is a wonder material with many superlatives to its name. It is the thinnest known material in the universe and the strongest ever measured. Its charge carriers exhibit giant intrinsic mobility, have zero effective mass, and can travel for micrometers without scattering at room temperature. Graphene can sustain current densities six orders of magnitude higher than that of copper, shows record thermal conductivity and stiffness, is impermeable to gases, and reconciles such conflicting qualities as brittleness and ductility. Electron transport in graphene is described by a Dirac-like equation, which allows the investigation of relativistic quantum phenomena in a benchtop experiment. This review analyzes recent trends in graphene research and applications, and attempts to identify future directions in which the field is likely to develop.
12,117 citations
TL;DR: The direct synthesis of large-scale graphene films using chemical vapour deposition on thin nickel layers is reported, and two different methods of patterning the films and transferring them to arbitrary substrates are presented, implying that the quality of graphene grown by chemical vapours is as high as mechanically cleaved graphene.
Abstract: Problems associated with large-scale pattern growth of graphene constitute one of the main obstacles to using this material in device applications. Recently, macroscopic-scale graphene films were prepared by two-dimensional assembly of graphene sheets chemically derived from graphite crystals and graphene oxides. However, the sheet resistance of these films was found to be much larger than theoretically expected values. Here we report the direct synthesis of large-scale graphene films using chemical vapour deposition on thin nickel layers, and present two different methods of patterning the films and transferring them to arbitrary substrates. The transferred graphene films show very low sheet resistance of approximately 280 Omega per square, with approximately 80 per cent optical transparency. At low temperatures, the monolayers transferred to silicon dioxide substrates show electron mobility greater than 3,700 cm(2) V(-1) s(-1) and exhibit the half-integer quantum Hall effect, implying that the quality of graphene grown by chemical vapour deposition is as high as mechanically cleaved graphene. Employing the outstanding mechanical properties of graphene, we also demonstrate the macroscopic use of these highly conducting and transparent electrodes in flexible, stretchable, foldable electronics.
10,033 citations
TL;DR: A density functional theory-based, high-throughput screening scheme that successfully uses these strategies to identify a new electrocatalyst for the hydrogen evolution reaction (HER), which is found to have a predicted activity comparable to, or even better than, pure Pt, the archetypical HER catalyst.
Abstract: The pace of materials discovery for heterogeneous catalysts and electrocatalysts could, in principle, be accelerated by the development of efficient computational screening methods. This would require an integrated approach, where the catalytic activity and stability of new materials are evaluated and where predictions are benchmarked by careful synthesis and experimental tests. In this contribution, we present a density functional theory-based, high-throughput screening scheme that successfully uses these strategies to identify a new electrocatalyst for the hydrogen evolution reaction (HER). The activity of over 700 binary surface alloys is evaluated theoretically; the stability of each alloy in electrochemical environments is also estimated. BiPt is found to have a predicted activity comparable to, or even better than, pure Pt, the archetypical HER catalyst. This alloy is synthesized and tested experimentally and shows improved HER performance compared with pure Pt, in agreement with the computational screening results.
3,134 citations
TL;DR: The catalytically active Ni2P nanoparticles had among the highest HER activity of any non-noble metal electrocatalyst reported to date, producing H2(g) with nearly quantitative faradaic yield, while also affording stability in aqueous acidic media.
Abstract: Nanoparticles of nickel phosphide (Ni2P) have been investigated for electrocatalytic activity and stability for the hydrogen evolution reaction (HER) in acidic solutions, under which proton exchange membrane-based electrolysis is operational. The catalytically active Ni2P nanoparticles were hollow and faceted to expose a high density of the Ni2P(001) surface, which has previously been predicted based on theory to be an active HER catalyst. The Ni2P nanoparticles had among the highest HER activity of any non-noble metal electrocatalyst reported to date, producing H2(g) with nearly quantitative faradaic yield, while also affording stability in aqueous acidic media.
2,441 citations
TL;DR: Amorphous molybdenum sulfide films are efficient hydrogen evolution catalysts in water as mentioned in this paper, achieving significant geometric current densities at low overpotentials (e.g., 15 mA cm−2 at η = 200 mV) using these catalysts.
Abstract: Amorphous molybdenum sulfide films are efficient hydrogen evolution catalysts in water. The films are prepared via simple electro-polymerization procedures and are characterized by XPS, electron microscopy and electronic absorption spectroscopy. Whereas the precatalysts could be MoS3 or MoS2, the active form of the catalysts is identified as amorphous MoS2. Significant geometric current densities are achieved at low overpotentials (e.g., 15 mA cm−2 at η = 200 mV) using these catalysts. The catalysis is compatible with a wide range of pHs (e.g., 0 to 13). The current efficiency for hydrogen production is quantitative. A 40 mV Tafel slope is observed, suggesting a rate-determining ion+atom step. The turnover frequency per active site is calculated. The amorphous molybdenum sulfide films are among the most active non-precious hydrogen evolution catalysts.
1,197 citations